ANSI INCITS 441-2008
自动控制/驱动接口命令.2(ADC-2)

Automation/Drive Interface Commands - 2 (ADC-2)

ANSI INCITS 441-2008 发布历史

This standard defines the model and command set extensions to facilitate operation of automation/drive interfacedevices. The clauses of this standard, implemented in conjunction with the applicable clauses of SPC-3, fullyspecify the standard command set for automation/drive interface devices.The objective of this standard is to provide the following:a) permit an application client to communicate over a SCSI service delivery subsystem, with a logical unit thatdeclares itself to be an automation/drive interface device in the PERIPHERAL DEVICE TYPE field of thestandard INQUIRY data (see SPC-3);b) define commands unique to the automation/drive interface device type; andc) define commands and parameters to manage the operation of the automation/drive interface device typeand the operation of logical units of other specific device types that are present in the same device as theautomation/drive interface logical unit.The following commands, parameter data, and features defined in previous versions of this standard are madeobsolete by this standard: Linked commands.Figure 1 shows the relationship of this standard to the other standards and related projects in the SCSI family ofstandards as of the publication of this standard.Figure 1 is intended to show the general relationship of the documents to one another. Figure 1 is not intended toimply a relationship such as a hierarchy, protocol stack, or system architecture. It indicates the applicability of astandard to the implementation of a given transport.Commands in this standard do not require the use of a specific SCSI transport protocol.

ANSI INCITS 441-2008由美国国家标准学会 US-ANSI 发布于 2008-05-21。

ANSI INCITS 441-2008 在中国标准分类中归属于: M14 通信网传输系统接口，在国际标准分类中归属于: 33.040.01 电信系统综合。

ANSI INCITS 441-2008 发布之时，引用了标准

• ISO ISO-TR 24971-2013

ANSI INCITS 441-2008的历代版本如下：

• 2008年05月21日 ANSI INCITS 441-2008 自动控制/驱动接口命令.2(ADC-2)

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ANSI INCITS 441-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

ANSI INCITS 441-2008

发布日期

2008年05月21日

实施日期

废止日期

无

中国标准分类号

M14

国际标准分类号

33.040.01

发布单位

US-ANSI

引用标准

ISO/IEC 14776-412 ISO/IEC 14776-413 ISO/IEC 14776-452 ISO/IEC 14776-453 ISO/IEC 14776-332 ISO/IEC 14776-352 ISO/IEC 14776-364 ISO/IEC 14776-251 ISO/IEC 14776-122 ISO/IEC 14776-223 ISO/IEC 14776-115 ISO/IEC 14776-151 ISO/IEC 14776-191 ISO/IEC 14776-454 ISO

适用范围

This standard defines the model and command set extensions to facilitate operation of automation/drive interfacedevices. The clauses of this standard, implemented in conjunction with the applicable clauses of SPC-3, fullyspecify the standard command set for automation/drive interface devices.The objective of this standard is to provide the following:a) permit an application client to communicate over a SCSI service delivery subsystem, with a logical unit thatdeclares itself to be an automation/drive interface device in the PERIPHERAL DEVICE TYPE field of thestandard INQUIRY data (see SPC-3);b) define commands unique to the automation/drive interface device type; andc) define commands and parameters to manage the operation of the automation/drive interface device typeand the operation of logical units of other specific device types that are present in the same device as theautomation/drive interface logical unit.The following commands, parameter data, and features defined in previous versions of this standard are madeobsolete by this standard: Linked commands.Figure 1 shows the relationship of this standard to the other standards and related projects in the SCSI family ofstandards as of the publication of this standard.Figure 1 is intended to show the general relationship of the documents to one another. Figure 1 is not intended toimply a relationship such as a hierarchy, protocol stack, or system architecture. It indicates the applicability of astandard to the implementation of a given transport.Commands in this standard do not require the use of a specific SCSI transport protocol.