SAE AIR 5747-2008
无源射频识别(RFID)标签用EMC实验室RF辐射发射报告

EMC Laboratory RF Radiated Emission Report for Passive Radio Frequency Identification (RFID) Tags

SAE AIR 5747-2008 发布历史

This paper contains RF radiated emission and susceptibility data from passive Radio Frequency Identification (RFID) tags and readers operating at 13.56 MHz, 915 MHz, and 2.45 GHz. Laboratory test procedures incorporated the methods ofRTCA DO-160D (test procedures for aviation electrical/electronic equipment) and DO-233 (test procedures for consumer portable electronic devices (PEDs)). Only one commercially available system was evaluated per established operating frequencies.1.1 PurposeThe purpose of this paper is to record the RF radiated emissions and susceptibility from selected passive RFID systems operating at 13.56 MHz, 915 MHz, and 2.45 GHz. The emissions data (intentional and spurious) includes operation with both “good” and damaged tags. In addition, RF radiated susceptibility tests were performed to determine functionality and inadvertent operation.These tests are limited in scope to the RF radiated emissions of PEDs tested in a controlled laboratory environment per the requirements of RTCA DO-160D, RTCA DO-233, and an airplane manufacturer's limit.This paper:• identifies test units,• describes how the tests were conducted,• identifies support equipment and instrumentation,• includes test data, and• provides results.

SAE AIR 5747-2008由美国机动车工程师协会 US-SAE 发布于 2008-06-18。

SAE AIR 5747-2008 在中国标准分类中归属于: V04 基础标准与通用方法，在国际标准分类中归属于: 35.240.60 信息技术在运输和贸易中的应用。

SAE AIR 5747-2008 发布之时，引用了标准

• RTCA DO-160D-1997 
• SAE AS 5678-2006 航行器用要求的无源无线频率识别(RFID)标签

SAE AIR 5747-2008的历代版本如下：

• 2008年06月18日 SAE AIR 5747-2008 无源射频识别(RFID)标签用EMC实验室RF辐射发射报告

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE AIR 5747-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE AIR 5747-2008

发布日期

2008年06月18日

实施日期

废止日期

无

中国标准分类号

V04

国际标准分类号

35.240.60

发布单位

US-SAE

引用标准

RTCA DO-160D-1997 RTCA DO-233-1996 SAE AS 5678-2006 RTCA DO-294

适用范围

This paper contains RF radiated emission and susceptibility data from passive Radio Frequency Identification (RFID) tags and readers operating at 13.56 MHz, 915 MHz, and 2.45 GHz. Laboratory test procedures incorporated the methods ofRTCA DO-160D (test procedures for aviation electrical/electronic equipment) and DO-233 (test procedures for consumer portable electronic devices (PEDs)). Only one commercially available system was evaluated per established operating frequencies.1.1 PurposeThe purpose of this paper is to record the RF radiated emissions and susceptibility from selected passive RFID systems operating at 13.56 MHz, 915 MHz, and 2.45 GHz. The emissions data (intentional and spurious) includes operation with both “good” and damaged tags. In addition, RF radiated susceptibility tests were performed to determine functionality and inadvertent operation.These tests are limited in scope to the RF radiated emissions of PEDs tested in a controlled laboratory environment per the requirements of RTCA DO-160D, RTCA DO-233, and an airplane manufacturer's limit.This paper:• identifies test units,• describes how the tests were conducted,• identifies support equipment and instrumentation,• includes test data, and• provides results.