IEC 61184-2008
卡口灯座
Bayonet lampholders
IEC 61184-2008 发布历史
This International Standard applies to bayonet lampholders B15d and B22d for connection of lamps and semi-luminaires to a supply voltage of 250 V. This standard also covers lampholders which are integral with a luminaire or intended to be built into appliances. It covers the requirements for the lampholder only. For all other requirements, such as protection against electric shock in the area of the terminals, the requirements of the relevant appliance standard shall be observed and tested after building into the appropriate equipment, when that equipment is tested according to its own standard. Lampholders for use by luminaire manufacturers only are not for retail sale. NOTE Where lampholders are used in luminaires, their maximum operating temperatures are specified in IEC 60598-1. B15 denotes the cap/holder fit as defined by IEC 60061-1, sheet 7004-11 and IEC 60061-2, sheet 7005-16 with the corresponding gauges. B22 denotes the cap/holder fit as defined by IEC 60061-1, sheet 7004-10 and IEC 60061-2, sheet 7005-10 with the correspondina gauges.
IEC 61184-2008由国际电工委员会 IX-IEC 发布于 2008-07。
IEC 61184-2008 在中国标准分类中归属于: K74 灯具附件，在国际标准分类中归属于: 29.140.10 灯头和灯座。
IEC 61184-2008 发布之时，引用了标准
- IEC 60061 灯头、灯座及检验其安全性和互换性的量规.包括IEC 60061所有部分在内的在线数据库的全年定购
- IEC 60061-1 *， 2020-11-27 更新
- IEC 60061-2 *， 2020-11-27 更新
- IEC 60061-3 修改件58.灯头、灯座及检验其互换性和安全性的量规.第3部分:量规*， 2020-05-13 更新
- IEC 60064 修改件5.家用和类似用途普通照明用钨丝灯.性能要求*， 2009-07-30 更新
- IEC 60068-2-75-1997 电工电子产品环境试验.第2部分:试验方法.试验Eh:锤击试验
- IEC 60112-2003 固体绝缘材料的比较起痕指数和耐泄痕指数的测定方法
- IEC 60227 修改件2.额定电压450/750V及以下聚氯乙烯绝缘电缆.第7部分:用两根或两根以上导体屏蔽和未屏蔽的软电缆*， 2011-09-23 更新
- IEC 60245 修改件2.橡胶绝缘电缆.额定电压450/750V及以下.第8部分:要求高柔性应用的软线*， 2011-09-23 更新
- IEC 60399 修改件1.带灯罩座环的灯座筒螺纹*， 2008-07-08 更新
- IEC 60417 设备用图形符号
- IEC 60432 白炽灯 - 安全规格第3部分:钨卤灯（非车辆）*， 2012-07-04 更新
- IEC 60529-1989 由外壳提供的防护等级(IP代码)
- IEC 60598-1 灯具 - 第1部分:一般要求和测试*， 2020-08-17 更新
- IEC 60664-1-2007 低压系统内设备的绝缘配合.第1部分:原则、要求和试验
- IEC 60695-11-5-2004 着火危险试验.第11-5部分:针状火焰试验方法.装置、证实试验协议和指南
- ISO 4046-4-2002 纸、纸板、纸浆及其术语.词汇.第4部分:纸和纸板的等级和加工产品
* 在 IEC 61184-2008 发布之后有更新，请注意新发布标准的变化。
IEC 61184-2008的历代版本如下：
- 1993年05月 IEC 61184-1993 卡口灯座
- 1997年08月 IEC 61184-1997 卡口灯座
- 2004年 IEC 61184-2004 卡口灯座
- 2008年07月 IEC 61184-2008 卡口灯座
- 2011年04月20日 IEC 61184-2008/AMD1-2011 修改件1-刺刀灯座
- 2017年05月 IEC 61184-2017 卡口灯座
- 2019年12月11日 IEC 61184-2017/AMD1-2019 修改件1-刺刀灯座
- 标准号
- IEC 61184-2008
- 发布日期
- 2008年07月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- K74
- 国际标准分类号
- 29.140.10
- 发布单位
- IX-IEC
- 引用标准
- IEC 60061 IEC 60061-1 IEC 60061-2 IEC 60061-3 IEC 60064 IEC 60068-2-75-1997 IEC 60112-2003 IEC 60227 IEC 60245 IEC 60399 IEC 60417 IEC 60432 IEC 60529-1989 IEC 60598-1 IEC 60664-1-2007 IEC 60695-11-5-2004 ISO 4046-4-2002
- 代替标准
- IEC 61184-2017
- 被代替标准
- IEC 34B/1385/FDIS-2008 IEC 61184-1997 IEC 61184 AMD 1-2000 IEC 61184 AMD 2-2004
- 适用范围
- This International Standard applies to bayonet lampholders B15d and B22d for connection of lamps and semi-luminaires to a supply voltage of 250 V. This standard also covers lampholders which are integral with a luminaire or intended to be built into appliances. It covers the requirements for the lampholder only. For all other requirements, such as protection against electric shock in the area of the terminals, the requirements of the relevant appliance standard shall be observed and tested after building into the appropriate equipment, when that equipment is tested according to its own standard. Lampholders for use by luminaire manufacturers only are not for retail sale. NOTE Where lampholders are used in luminaires, their maximum operating temperatures are specified in IEC 60598-1. B15 denotes the cap/holder fit as defined by IEC 60061-1, sheet 7004-11 and IEC 60061-2, sheet 7005-16 with the corresponding gauges. B22 denotes the cap/holder fit as defined by IEC 60061-1, sheet 7004-10 and IEC 60061-2, sheet 7005-10 with the correspondina gauges.