PAS 1188-3-2003

Flood protection products - Specification - Part 3:Building skirt systems

PAS 1188-3-2003 发布历史

This Publicly Available Specification (PAS) specifies requirements for the design, testing, factory production control, installation and user documentation, and marking for different types and configurations of building skirt system intended for the temporary sealing of the above ground external faces of buildings and properties, in the event of flood water rising up to a nominal level, not exceeding 900 mm, above ground level, for use in the UK or locations with similar exposures, i.e. where there is a temperate climate and advanced warning of flooding is available. This PAS specifies the method of testing and any allowable leakage rate for above ground components. The range of building sizes covered is governed by the system constraints, but theoretically the system could be installed to provide protection to any size of building. NOTE 1 The pressures exerted by floodwater can cause sudden or long-term structural damage and undermine the foundations of a building, unless the building is specifically designed to withstand such stresses. The actual water level that can be safely retained by the external walls will depend upon the construction, age and condition of the walls. It is recommended that a suitably qualified building surveyor, architect or structural engineer inspects the external walls, before any building skirt system is installed. NOTE 2 Flood protection products are not normally intended to prevent water more than approximately one metre above the level of the ground surrounding the property from entering the building. NOTE 3 The PAS leakage test represents conditions that can be experienced during a flood. This includes testing the product under static water levels, random waves up to 0.1 m high and currents up to 1.0 m/s. NOTE 4 This PAS does not cover testing with contaminated or saline water. NOTE 5 Certification of the product does not mean it is suitable for all situations. If the user is in any doubt as to the suitability of a product they should seek further information from Preparing for floods — Interim guidance for improving the flood resistance of domestic and small business properties [1], or from the Flood Protection Association (www.floodprotectionassociation.org) or other professional advisers. This PAS does not cover requirements for surface applied treatments or membranes applied to the above or below ground faces of buildings. This PAS does not cover ground water protection systems. This PAS is not applicable to flood protection products designed solely for installation across building apertures. These are covered by PAS 1188-1. This PAS is not applicable to temporary or demountable flood protection barriers which are designed to be installed away from and not attached to buildings, including flood protection products intended for installation across driveway entrances and gateways at property boundaries. These are covered by PAS 1188-2.

PAS 1188-3-2003由英国标准学会 GB-BSI 发布于 2003，并于 2003 实施。

PAS 1188-3-2003 在中国标准分类中归属于: P31 建筑物理，在国际标准分类中归属于: 91.120.99 有关建筑物防护的其他标准。

PAS 1188-3-2003的历代版本如下：

• 2003年 PAS 1188-3-2003

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 PAS 1188-3-2003 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

PAS 1188-3-2003

发布日期

2003年

实施日期

2003年

废止日期

无

中国标准分类号

P31

国际标准分类号

91.120.99

发布单位

GB-BSI

适用范围

This Publicly Available Specification (PAS) specifies requirements for the design, testing, factory production control, installation and user documentation, and marking for different types and configurations of building skirt system intended for the temporary sealing of the above ground external faces of buildings and properties, in the event of flood water rising up to a nominal level, not exceeding 900 mm, above ground level, for use in the UK or locations with similar exposures, i.e. where there is a temperate climate and advanced warning of flooding is available. This PAS specifies the method of testing and any allowable leakage rate for above ground components. The range of building sizes covered is governed by the system constraints, but theoretically the system could be installed to provide protection to any size of building. NOTE 1 The pressures exerted by floodwater can cause sudden or long-term structural damage and undermine the foundations of a building, unless the building is specifically designed to withstand such stresses. The actual water level that can be safely retained by the external walls will depend upon the construction, age and condition of the walls. It is recommended that a suitably qualified building surveyor, architect or structural engineer inspects the external walls, before any building skirt system is installed. NOTE 2 Flood protection products are not normally intended to prevent water more than approximately one metre above the level of the ground surrounding the property from entering the building. NOTE 3 The PAS leakage test represents conditions that can be experienced during a flood. This includes testing the product under static water levels, random waves up to 0.1 m high and currents up to 1.0 m/s. NOTE 4 This PAS does not cover testing with contaminated or saline water. NOTE 5 Certification of the product does not mean it is suitable for all situations. If the user is in any doubt as to the suitability of a product they should seek further information from Preparing for floods — Interim guidance for improving the flood resistance of domestic and small business properties [1], or from the Flood Protection Association (www.floodprotectionassociation.org) or other professional advisers. This PAS does not cover requirements for surface applied treatments or membranes applied to the above or below ground faces of buildings. This PAS does not cover ground water protection systems. This PAS is not applicable to flood protection products designed solely for installation across building apertures. These are covered by PAS 1188-1. This PAS is not applicable to temporary or demountable flood protection barriers which are designed to be installed away from and not attached to buildings, including flood protection products intended for installation across driveway entrances and gateways at property boundaries. These are covered by PAS 1188-2.

谁引用了PAS 1188-3-2003 更多引用