IEC 60838-1 Edition 4.1-2008
各种灯座.第1部分:一般要求和试验

Miscellaneous lampholders - Part 1: General requirements and tests

IEC 60838-1 Edition 4.1-2008 发布历史

This part of IEC 60838 applies to lampholders of miscellaneous types intended for building-in (to be used with general purpose light sources, projection lamps, floodlighting lamps and street-lighting lamps with caps as listed in annex A) and the methods of test to be used in determining the safe use of lamps in lampholders. This part of IEC 60838 also covers lampholders which are integral with a luminaire. It covers the requirements for the lampholder only. This part of IEC 60838 also covers lampholders integrated in an outer shell and dome similar to Edison screw lampholders. Such lampholders are further tested in accordance with the following subclauses of IEC 60238: 8.4; 8.5; 8.6; 9.3; 10.7; 11; 12.2; 12.5; 12.6; 12.7; 13; 15.3; 15.4; 15.5 and 15.9. Requirements for lampholders for tubular fluorescent lamps, Edison screw lampholders and bayonet lampholders are covered by separate standards.

IEC 60838-1 Edition 4.1-2008由国际电工委员会 IX-IEC 发布于 2008-08。

IEC 60838-1 Edition 4.1-2008 在中国标准分类中归属于: K74 灯具附件，在国际标准分类中归属于: 29.140.10 灯头和灯座。

IEC 60838-1 Edition 4.1-2008 发布之时，引用了标准

• IEC 60061-1 *， 2020-11-27 更新
• IEC 60061-2 *， 2020-11-27 更新
• IEC 60061-3 修改件58.灯头、灯座及检验其互换性和安全性的量规.第3部分:量规*， 2020-05-13 更新
• IEC 60068-2-20-1979 环境试验 第2-20部分:试验 试验T:锡焊
• IEC 60068-2-75-1997 电工电子产品环境试验.第2部分:试验方法.试验Eh:锤击试验
• IEC 60112-1979 固体绝缘材料在潮湿条件下相对泄痕指数和耐泄痕指数的推荐测定方法
• IEC 60227 修改件2.额定电压450/750V及以下聚氯乙烯绝缘电缆.第7部分:用两根或两根以上导体屏蔽和未屏蔽的软电缆*， 2011-09-23 更新
• IEC 60238-2004 螺口灯座
• IEC 60245 修改件2.橡胶绝缘电缆.额定电压450/750V及以下.第8部分:要求高柔性应用的软线*， 2011-09-23 更新
• IEC 60352-1 无焊连接 第1部分:无焊绕接 一般要求、试验方法和使用指南
• IEC 60399 修改件1.带灯罩座环的灯座筒螺纹
• IEC 60529-1989 由外壳提供的防护等级(IP代码)
• IEC 60598-1 灯具 - 第1部分:一般要求和测试*， 2020-08-17 更新
• IEC 60664-1-1992 低压系统内设备的绝缘配合.第1部分:原则、要求和试验

* 在 IEC 60838-1 Edition 4.1-2008 发布之后有更新，请注意新发布标准的变化。

IEC 60838-1 Edition 4.1-2008的历代版本如下：

• 2008年08月 IEC 60838-1 Edition 4.1-2008 各种灯座.第1部分:一般要求和试验

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEC 60838-1 Edition 4.1-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEC 60838-1 Edition 4.1-2008

发布日期

2008年08月

实施日期

废止日期

无

中国标准分类号

K74

国际标准分类号

29.140.10

发布单位

IX-IEC

引用标准

IEC 60061- IEC 60061-1 IEC 60061-2 IEC 60061-3 IEC 60068-2-20-1979 IEC 60068-2-75-1997 IEC 60112-1979 IEC 60227 IEC 60238-2004 IEC 60245 IEC 60352-1 IEC 60399 IEC 60529-1989 IEC 60598-1 IEC 60664-1-1992 IEC 60664-1/A1-2000 IEC 60664-1/A2-2002 IEC 60695-2-

适用范围

This part of IEC 60838 applies to lampholders of miscellaneous types intended for building-in (to be used with general purpose light sources, projection lamps, floodlighting lamps and street-lighting lamps with caps as listed in annex A) and the methods of test to be used in determining the safe use of lamps in lampholders. This part of IEC 60838 also covers lampholders which are integral with a luminaire. It covers the requirements for the lampholder only. This part of IEC 60838 also covers lampholders integrated in an outer shell and dome similar to Edison screw lampholders. Such lampholders are further tested in accordance with the following subclauses of IEC 60238: 8.4; 8.5; 8.6; 9.3; 10.7; 11; 12.2; 12.5; 12.6; 12.7; 13; 15.3; 15.4; 15.5 and 15.9. Requirements for lampholders for tubular fluorescent lamps, Edison screw lampholders and bayonet lampholders are covered by separate standards.