IEC/TS 60034-18-42-2008
旋转电机.第18-42部分:电压转换器馈电的旋转电机用抗局部放电电气绝缘系统(II型)的鉴定和验收试验

Rotating electrical machines - Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters

IEC/TS 60034-18-42-2008 发布历史

This Technical Specification defines criteria for assessing the insulation system of stator/rotor windings of single or polyphase AC machines which are subjected to repetitive impulse voltages, such as pulse width modulation (PWM) converters, and expected to withstand partial discharge activity during service. It specifies electrical qualification and acceptance tests on representative samples which verify fitness for operation with voltage-source converters. This document does not apply to: - Rotating machines which are fed by converters only for starting. - Electrical equipment and systems for traction. NOTE Although this Technical Specification deals with voltage-source converters, it is recognised that there are other types of converters that can create repetitive impulse voltages. For these converters, a similar approach to testing can be used if needed.

IEC/TS 60034-18-42-2008由国际电工委员会 IX-IEC 发布于 2008-08。

IEC/TS 60034-18-42-2008 在中国标准分类中归属于: K20 旋转电机综合，在国际标准分类中归属于: 29.080.30 绝缘系统,29.160 旋转电机,29.160.01 旋转电机综合。

IEC/TS 60034-18-42-2008 发布之时，引用了标准

• IEC 60034-18-1 旋转电机.第18-1部分:绝缘系统的功能性评估.总指南*， 2010-03-01 更新
• IEC 60216-3 电绝缘材料. 耐热性能. 第3部分: 耐热性计算说明*， 2021-03-01 更新
• IEC/TS 61251 电绝缘材料.交流电压耐久性评估.导言
• IEC 61800-4 调速电气传动系统.第4部分:一般要求.交流电压1000 V以上但不超过35 kV的交流调速电气传动系统额定值的规范
• IEC 62068-1 电绝缘系统.反复脉冲产生的电应力.第1部分:耐电性评价的一般方法
• IEC 62539 电气绝缘击穿数据的统计分析用指南

* 在 IEC/TS 60034-18-42-2008 发布之后有更新，请注意新发布标准的变化。

IEC/TS 60034-18-42-2008的历代版本如下：

• 2008年08月 IEC/TS 60034-18-42-2008 旋转电机.第18-42部分:电压转换器馈电的旋转电机用抗局部放电电气绝缘系统(II型)的鉴定和验收试验

IEC/TS 60034-18-42-2008 旋转电机.第18-42部分:电压转换器馈电的旋转电机用抗局部放电电气绝缘系统(II型)的鉴定和验收试验 由 IEC 2/1482/DTS-2008 变更而来。

IEC/TS 60034-18-42-2008 旋转电机.第18-42部分:电压转换器馈电的旋转电机用抗局部放电电气绝缘系统(II型)的鉴定和验收试验 于 2017-02 变更为 IEC 60034-18-42-2017 旋转电机. 第18-42部分: 电压转换器馈电的旋转电机用抗局部放电电气绝缘系统(II型). 鉴定试验。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEC/TS 60034-18-42-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEC/TS 60034-18-42-2008

发布日期

2008年08月

实施日期

废止日期

无

中国标准分类号

K20

国际标准分类号

29.080.30;29.160;29.160.01

发布单位

IX-IEC

引用标准

IEC 60034-18-1 IEC 60034-18-32 IEC/TS 60034-18-41 IEC 60216-3 IEC/TS 61251 IEC 61800-4 IEC 62068-1 IEC 62539

代替标准

IEC 60034-18-42-2017

被代替标准

IEC 2/1482/DTS-2008

适用范围

This Technical Specification defines criteria for assessing the insulation system of stator/rotor windings of single or polyphase AC machines which are subjected to repetitive impulse voltages, such as pulse width modulation (PWM) converters, and expected to withstand partial discharge activity during service. It specifies electrical qualification and acceptance tests on representative samples which verify fitness for operation with voltage-source converters. This document does not apply to: - Rotating machines which are fed by converters only for starting. - Electrical equipment and systems for traction. NOTE Although this Technical Specification deals with voltage-source converters, it is recognised that there are other types of converters that can create repetitive impulse voltages. For these converters, a similar approach to testing can be used if needed.

IEC/TS 60034-18-42-2008系列标准

谁引用了IEC/TS 60034-18-42-2008 更多引用