IEC/TS 62257-9-6-2008
农村电气化用小型可再生能源和混合系统的建议.第9-6部分:光电独立电气化系统的选择(PV-IES)

Recommendations for small renewable energy and hybrid systems for rural electrification - Part-9-6: Selection of photovoltaic individual electrification systems (PV-IES)

IEC/TS 62257-9-6-2008 发布历史

The purpose of this part of IEC 62257 is to propose simple selection procedure and cheap, comparative tests which can be performed in laboratories of developing countries, in order to identify the most suitable model of small Photovoltaic Individual Electrification Systems (PV- lES) up to 500 Wp for a particular rural electrification project from a number of products submitted for test. It is different of the scope of IEC 62124, Photovoltaic (PV) stand alone systems - Design verification, which provides guidance for verifying the design of stand-alone PV systems and indoor and outdoor tests in order to evaluate the performance of PV systems including PV generator, battery storage and loads such as lights, TV sets, and refrigerators. The tests provided in IEC 62257-9-6 allow assessment of the performance of a PV-IES according to the requirement of the General Specification (GS) of the project (see IEC/TS 62257-2) and to verify their ability to provide the required service. They should be performed locally, as close as possible to the real site operating conditions. This document is not a type approval standard. It is a technical specification to be used as guidelines and does not replace any existing IEC standard on PV systems.

IEC/TS 62257-9-6-2008由国际电工委员会 IX-IEC 发布于 2008-09。

IEC/TS 62257-9-6-2008 在中国标准分类中归属于: F21 电力系统，在国际标准分类中归属于: 27.160 太阳能工程,27.180 风力发电系统和其他能源。

IEC/TS 62257-9-6-2008 发布之时，引用了标准

• IEC 61215 地面光伏组件.设计鉴定和型式认证.第2部分:试验程序*， 2021-02-24 更新
• IEC 61646 薄膜地面光电(PV)模块.设计鉴定和定型
• IEC 61730-1 光电(PV)组件安全性鉴定.第1部分:构造要求*， 2016-08-01 更新
• IEC 61730-2 光电(PV)模件安全合格鉴定.第2部分:检验要求*， 2016-08-01 更新
• IEC/TS 62257-2-2004 农村电气化用小型可再生能源和混合系统的建议.第2部分:从电气化系统的要求到范围
• IEC/TS 62257-4 农村电气化用可再生能源和混合系统的建议.第4部分:系统选择和设计*， 2015-12-01 更新
• IEC/TS 62257-5 农村电气化用小型可再生能源和混合系统的建议.第5部分:电气事故的防护
• IEC/TS 62257-6 农村电气化用可再生能源和混合系统的建议.第6部分:验收、操作、维修和替换*， 2015-12-01 更新
• IEC/TS 62257-7-1 用于农村电气化的小型可再生能源和混合系统用推荐规范.第7-1部分:发电机.光电发生器*， 2010-09-01 更新
• IEC/TS 62257-8-1-2007 农村电气化用小型可再生能源和混合系统的建议.第8-1部分:独立电气化系统用电池和电池管理系统的选择.发展中国家可采用的自动充满铅酸蓄电池的特殊案例
• IEC/TS 62257-9-3 农村电气化用小型可再生能源和混合系统的建议.第9-3部分:集成系统.用户接口
• IEC/TS 62257-9-4 农村电气化用小型可再生能源和混合系统的建议.第9-4部分:集成系统.用户设备
• IEC/TS 62257-12-1 农村电气化使用可再生能源和混合动力系统的建议. 第12-1部分: 离网型电力系统用灯具和照明期间的选择*， 2015-10-01 更新

* 在 IEC/TS 62257-9-6-2008 发布之后有更新，请注意新发布标准的变化。

IEC/TS 62257-9-6-2008的历代版本如下：

• 2008年09月 IEC/TS 62257-9-6-2008 农村电气化用小型可再生能源和混合系统的建议.第9-6部分:光电独立电气化系统的选择(PV-IES)

IEC/TS 62257-9-6-2008 农村电气化用小型可再生能源和混合系统的建议.第9-6部分:光电独立电气化系统的选择(PV-IES) 由 IEC/PAS 62111-1999 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEC/TS 62257-9-6-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEC/TS 62257-9-6-2008

发布日期

2008年09月

实施日期

废止日期

无

中国标准分类号

F21

国际标准分类号

27.160;27.180

发布单位

IX-IEC

引用标准

IEC 61215 IEC 61646 IEC 61730-1 IEC 61730-2 IEC/TS 62257-2-2004 IEC/TS 62257-4 IEC/TS 62257-5 IEC/TS 62257-6 IEC/TS 62257-7-1 IEC/TS 62257-8-1-2007 IEC/TS 62257-9-3 IEC/TS 62257-9-4 IEC/TS 62257-12-1

被代替标准

IEC 82/510/DTS-2008 IEC/PAS 62111-1999

适用范围

The purpose of this part of IEC 62257 is to propose simple selection procedure and cheap, comparative tests which can be performed in laboratories of developing countries, in order to identify the most suitable model of small Photovoltaic Individual Electrification Systems (PV- lES) up to 500 Wp for a particular rural electrification project from a number of products submitted for test. It is different of the scope of IEC 62124, Photovoltaic (PV) stand alone systems - Design verification, which provides guidance for verifying the design of stand-alone PV systems and indoor and outdoor tests in order to evaluate the performance of PV systems including PV generator, battery storage and loads such as lights, TV sets, and refrigerators. The tests provided in IEC 62257-9-6 allow assessment of the performance of a PV-IES according to the requirement of the General Specification (GS) of the project (see IEC/TS 62257-2) and to verify their ability to provide the required service. They should be performed locally, as close as possible to the real site operating conditions. This document is not a type approval standard. It is a technical specification to be used as guidelines and does not replace any existing IEC standard on PV systems.

IEC/TS 62257-9-6-2008系列标准

谁引用了IEC/TS 62257-9-6-2008 更多引用