AWWA C213-2007
钢水管内部和外部用熔解接合环氧涂层

Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines

AWWA C213-2007 发布历史

This standard describes the material and application requirements for fusion‑bonded epoxy coatings for the interior and exterior of steel water pipe, special sections, welded joints, connections, and fittings for steel water pipelines installed underground or underwater. Fusion‑bonded epoxy coatings are heat‑activated, chemically cured coating systems. 1.1.1 Minimum pipe diameter. The minimum pipe diameter for application of an internal coating that can be inspected and repaired by entering the pipe shall be 24 in. (600 mm).* Pipe diameters less than 24 in. (600 mm) that can be electrically inspected internally may be included, provided the work complies with applicable provisions of this standard. 1.1.2 Maximum temperatures. AWWA pipe coating standards are written for and based on the service temperature of potable water. Consult the coating manufacturer for conditions and limitations.

AWWA C213-2007由美国给水工程协会 US-AWWA 发布于 2007-06-24，并于 2008-07-01 实施。

AWWA C213-2007 在中国标准分类中归属于: A29 材料防护。

AWWA C213-2007 发布之时，引用了标准

• ANSI/AWWA C203 *， 2020-10-26 更新
• ANSI/AWWA C209 钢水管、特殊型钢、连接件和配件用低温胶带涂层*， 2022-07-22 更新
• ANSI/AWWA C210 钢制水管和配件的液体环氧涂层和衬里*， 2015-06-07 更新
• ANSI/AWWA C214 *， 2020-10-26 更新
• ANSI/AWWA C216 供水钢管专用部件、连接件和配件外部可热收缩交联的聚烯烃涂层
• ANSI/AWWA C217 给水钢管用连接件和配件外部矿脂带及石蜡带涂层*， 2009-01-25 更新
• ASTM D149 固体电绝缘材料在商业电源频率下的介电击穿电压和介电强度的标准测试方法
• ASTM D153 颜料比重的标准测试方法*， 2020-06-01 更新
• ASTM D257 绝缘材料的直流电阻或电导率的标准测试方法
• ASTM D1002 用拉伸载荷（金属对金属）测定单搭接粘合金属试样表观剪切强度的标准试验方法
• ASTM D1004 塑料薄膜和薄板的初始抗撕裂性的标准试验方法
• ASTM D1921 塑料材料粒度（筛分析）的标准试验方法
• ASTM D4417 爆破清洁钢表面轮廓的现场测量标准测试方法
• ASTM D6677 用刀评估粘结性的标准试验方法*， 2022-07-22 更新
• ASTM G14 管道涂层抗冲击性的标准试验方法（落锤试验）
• ASTM G17 管道涂层抗穿透性的标准试验方法 (冲杆)*， 2022-07-22 更新
• NACE RP0394 工厂用熔接粘合环氧外部管道涂料的施涂,性能和质量控制.项目编号21064
• NACE RP0490 

* 在 AWWA C213-2007 发布之后有更新，请注意新发布标准的变化。

AWWA C213-2007的历代版本如下：

• 2001年06月17日 AWWA C213-2001 钢水管内部和外部液态环氧涂层熔合系统.2002年6月16日
• 2007年06月24日 AWWA C213-2007 钢水管内部和外部用熔解接合环氧涂层

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 AWWA C213-2007 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

AWWA C213-2007

发布日期

2007年06月24日

实施日期

2008年07月01日

废止日期

无

中国标准分类号

A29

发布单位

US-AWWA

引用标准

ANSI/AWWA C203 ANSI/AWWA C209 ANSI/AWWA C210 ANSI/AWWA C214 ANSI/AWWA C216 ANSI/AWWA C217 ASTM D149 ASTM D153 ASTM D257 ASTM D1002 ASTM D1004 ASTM D1921 ASTM D4417 ASTM D6677 ASTM G14 ASTM G17 NACE RD-0188 NACE RP0394 NACE RP0490 NSF/ANSI 60 NSF/ANSI 61 S

代替标准

AWWA C213-2015

被代替标准

AWWA C213-2001

适用范围

This standard describes the material and application requirements for fusion‑bonded epoxy coatings for the interior and exterior of steel water pipe, special sections, welded joints, connections, and fittings for steel water pipelines installed underground or underwater. Fusion‑bonded epoxy coatings are heat‑activated, chemically cured coating systems. 1.1.1 Minimum pipe diameter. The minimum pipe diameter for application of an internal coating that can be inspected and repaired by entering the pipe shall be 24 in. (600 mm).* Pipe diameters less than 24 in. (600 mm) that can be electrically inspected internally may be included, provided the work complies with applicable provisions of this standard. 1.1.2 Maximum temperatures. AWWA pipe coating standards are written for and based on the service temperature of potable water. Consult the coating manufacturer for conditions and limitations.