DIN EN 818-3-2008
起重用短环节链.安全性.第3部分:链式吊索的中等公差.等级4(包含修改件A1-2008).英文版本DIN EN 818-3-2008
Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4(includes Amendment A1:2008); English version of DIN EN 818-3:2008-12
DIN EN 818-3-2008 发布历史
This part of EN 818 specifies the requirements related to safety for short link chains, grade 4, of medium tolerance for use in chain slings to EN 818-4:1996+A1 and for general lifting purposes. The standard is applicable to electrically welded round steel short link chains, conforming to EN 818-1:1996+A1 , which are intended for lifting objects, materials or goods. The range of nominal sizes of chain covered by this Part of EN 818 is from 7 mm to 45 mm. The hazards covered by this Part of EN 818 are identified in clause 4. Annex A contains the bases for calculation of tabulated values for dimensions, working load limits and mechanical properties. Annex B gives information on the mass/metre of chain. Annex C gives an example of a designation system for chains of grade 4. Annex ZA gives the relationship with EU Directives.
DIN EN 818-3-2008由德国标准化学会 DE-DIN 发布于 2008-12，并于 2008-12-01 实施。
DIN EN 818-3-2008 在中国标准分类中归属于: J80 起重机械，在国际标准分类中归属于: 53.020.30 起重设备附件。
DIN EN 818-3-2008 发布之时，引用了标准
- EN 1050-1996
- EN 10025 EN 10025-6-2019
- EN 10088-3 不锈钢.第3部分:一般用途的耐腐蚀钢的半成品.棒,竿,线材,型材和光亮产品的技术交付条件*， 2014-10-01 更新
- EN ISO 12100-1 机械安全.设计用的基本概念,一般原则.第1部分:基本术语,方法论.包含修改件A1-2009［代替:CEN EN 292-1］*， 2022-07-22 更新
- EN ISO 12100-2 械安全.基本概念和设计通则.第2部分:技术原理.包含修改件A1-2009［代替:CEN EN 292-2］*， 2022-07-22 更新
- ISO 643 ISO 643-2019
* 在 DIN EN 818-3-2008 发布之后有更新，请注意新发布标准的变化。
DIN EN 818-3-2008的历代版本如下：
- 2008年12月 DIN EN 818-3-2008 起重用短环节链.安全性.第3部分:链式吊索的中等公差.等级4(包含修改件A1-2008).英文版本DIN EN 818-3-2008
- 标准号
- DIN EN 818-3-2008
- 发布日期
- 2008年12月
- 实施日期
- 2008年12月01日
- 废止日期
- 无
- 中国标准分类号
- J80
- 国际标准分类号
- 53.020.30
- 发布单位
- DE-DIN
- 引用标准
- EN 818-1-1996+A1-2008 EN 818-6-2000+A1 EN 1050-1996 EN 10025 EN 10088-3 EN ISO 12100-1 EN ISO 12100-2 ISO 643
- 被代替标准
- DIN EN 818-3-1999 DIN EN 818-3/A1-2006
- 适用范围
- This part of EN 818 specifies the requirements related to safety for short link chains, grade 4, of medium tolerance for use in chain slings to EN 818-4:1996+A1 and for general lifting purposes. The standard is applicable to electrically welded round steel short link chains, conforming to EN 818-1:1996+A1 , which are intended for lifting objects, materials or goods. The range of nominal sizes of chain covered by this Part of EN 818 is from 7 mm to 45 mm. The hazards covered by this Part of EN 818 are identified in clause 4. Annex A contains the bases for calculation of tabulated values for dimensions, working load limits and mechanical properties. Annex B gives information on the mass/metre of chain. Annex C gives an example of a designation system for chains of grade 4. Annex ZA gives the relationship with EU Directives.