DIN EN 13476-3-2009
无压地下排水和污水塑料管系统 未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)结构壁管系统 第3部分:B型、有平滑内外表面的管和配件及系统用规范

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth

DIN EN 13476-3-2009 发布历史

This part of EN 13476, together with EN 13476-1, specifies the definitions and requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are intended to be used for non-pressure underground drainage and sewerage systems. This part is applicable to pipes and fittings with smooth internal and profiled external surfaces, designated as Type B. It specifies test methods and test parameters as well as requirements. This part is applicable to: a) structured-wall pipes and fittings, which are intended to be used buried underground outside the building structure, reflected in the marking of products by "U"; b) structured-wall pipes and fittings, which are intended to be used buried underground both outside (application area code "U") and within the building structure (application area code "D"), reflected in the marking of products by "UD". This part is applicable to structured-wall pipes and fittings with or without an integral socket with elastomeric ring seal joints as well as welded and fused joints. This part covers a range of pipe and fitting sizes, materials, pipe constructions, stiffness classes, application classes, and tolerance classes and gives recommendations concerning colours. NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. NOTE 2 For dimensions larger than DN 1200 OD/ID this document may be applied regarding appearance, colour, physical and mechanical characteristics as well as performance requirements.

DIN EN 13476-3-2009由德国标准化学会 DE-DIN 发布于 2009-04。

DIN EN 13476-3-2009 在中国标准分类中归属于: Q81 供水、排水器材设备，在国际标准分类中归属于: 93.030 外部污水排放系统。

DIN EN 13476-3-2009 发布之时，引用了标准

• EN 476 排水沟渠用组件的一般要求*， 2011-01-01 更新
• EN 580 塑料管道系统.未增塑聚氯乙烯(PVC-U)管.特定温度下耐二氯甲烷的试验方法
• EN 681-1 弹性密封件.水和污水设施用管联接密封件的材料要求.第1部分:琉化橡胶.包含修改件A1-1998 和 A2-2002;合并勘误表-2002年8月;包含修改件A3-2005
• EN 681-2 弹性密封件.输水和污水设施用管联接密封件的材料要求.第2部分:热塑性弹性件.包含修改件A1-2002和A2-2005
• EN 681-4 弹性密封件.输水和污水设施用管联接密封件的材料要求.第4部分:聚氨酯铸造密封元件.包含修改件A1-2002 和 A2-2005
• EN 727 塑料管道和导管系统.热塑性管和配件.维卡(Vicat)软化温度(VST)的测定
• EN 728 塑料管道和导管系统.聚烯烃管和配件.氧化感应时间的测定
• EN 744 塑料管道和导管系统.热塑管.耐连续吹风的试验方法
• EN 922 塑料管道和管道输送系统.未增塑聚氯乙烯管和管件.测定粘度数值和K值计算用试样制备
• EN 1053 塑料管道系统.无压力情况下使用的热塑管道系统.防水性的检验方法
• EN 1055-1996 塑料管道系统.粪便和污水排放用热塑管道系统.抗周期性升温的试验方法
• EN 1277 塑料管道系统.地下无压用热塑性管道系统.弹性密封环型接头密封性的试验方法*， 2022-07-22 更新
• EN 1401-1 地下排水和排污水用塑料管道系统.未增塑聚氯乙烯.第1部分:管道,配件和系统用规范
• EN 1411 塑料管和导管系统.热塑性塑料管.用梯级法测定抗外冲击应力的能力
• EN 1437 塑料管道系统.地下排水排污用管道系统.温度循环和外加负荷结合的耐力试验方法
• EN 1446 塑料管道及保护管系统.热塑管.环形挠形测定
• EN 1852-1 *， 2018-01-01 更新
• EN 1905 塑料管道系统.硬聚氯乙烯管,管件和材料.基于氯的总含量评估聚氯乙烯含量的方法
• EN 1979 塑料管和管道系统.热塑螺旋型结构壁的管道.接缝拉伸强度的测定
• EN 12061 塑料管道系统.热塑配件.耐冲击的试验方法
• EN 12256 塑料管道系统.热塑性塑料配件.装配式配件机械强度或挠度的试验方法
• EN 12666-1 无压地下排水和排污塑料管道系统.聚丙烯(PP).第1部分:管道,配件和系统规范*， 2022-07-22 更新
• EN 13476-1-2007 无压地下排水和污水塑料管系统.未增塑聚氯乙烯(PVC-U),聚丙烯(PP )和聚乙烯(PE)结构壁管系统.第1部分:一般要求和性能特征
• EN 13476-2 *， 2018-04-01 更新
• CEN/TS 14541-2007 
• EN 14741 热塑管和管道系统.地下非压力设施用接头.通过评估密封压力测定弹性密封件接头的长期密封性能的试验方法
• EN 14758-1 地下无压力排水和排污用塑料管道系统.有矿物调节剂的聚丙烯(PP-MD)管道系统.第1部分:管,管件和系统规范*， 2012-03-01 更新

* 在 DIN EN 13476-3-2009 发布之后有更新，请注意新发布标准的变化。

DIN EN 13476-3-2009的历代版本如下：

• 2007年08月 DIN EN 13476-3-2007 无压地下排水和污水塑料管系统.未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)结构壁管系统.第3部分:B型、有平滑内外表面的管和配件及系统规范
• 2009年04月 DIN EN 13476-3-2009 无压地下排水和污水塑料管系统 未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)结构壁管系统 第3部分:B型、有平滑内外表面的管和配件及系统用规范
• 2020年12月 DIN EN 13476-3-2020 无压地下排水和污水塑料管系统. 未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)结构壁管系统. 第3部分: B型、有平滑内外表面的管和配件及系统用规范; 德文版本EN 13476-3-2018+A1-2020

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 13476-3-2009 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 13476-3-2009

发布日期

2009年04月

实施日期

废止日期

无

中国标准分类号

Q81

国际标准分类号

93.030

发布单位

DE-DIN

引用标准

EN 476 EN 580 EN 681-1 EN 681-2 EN 681-4 EN 727 EN 728 EN 744 EN 922 EN 1053 EN 1055-1996 EN 1277 EN 1401-1 EN 1411 EN 1437 EN 1446 EN 1852-1 EN 1905 EN 1979 EN 12061 EN 12256 EN 12666-1 EN 13476-1-2007 EN 13476-2 CEN/TS 14541-2007 EN 14741 EN 14758-1 EN

代替标准

DIN EN 13476-3-2018

被代替标准

DIN EN 13476-3-2007 DIN EN 13476-3/A1-2008

适用范围

This part of EN 13476, together with EN 13476-1, specifies the definitions and requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are intended to be used for non-pressure underground drainage and sewerage systems. This part is applicable to pipes and fittings with smooth internal and profiled external surfaces, designated as Type B. It specifies test methods and test parameters as well as requirements. This part is applicable to: a) structured-wall pipes and fittings, which are intended to be used buried underground outside the building structure, reflected in the marking of products by "U"; b) structured-wall pipes and fittings, which are intended to be used buried underground both outside (application area code "U") and within the building structure (application area code "D"), reflected in the marking of products by "UD". This part is applicable to structured-wall pipes and fittings with or without an integral socket with elastomeric ring seal joints as well as welded and fused joints. This part covers a range of pipe and fitting sizes, materials, pipe constructions, stiffness classes, application classes, and tolerance classes and gives recommendations concerning colours. NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. NOTE 2 For dimensions larger than DN 1200 OD/ID this document may be applied regarding appearance, colour, physical and mechanical characteristics as well as performance requirements.

DIN EN 13476-3-2009系列标准

谁引用了DIN EN 13476-3-2009 更多引用