SAE J 2876-2009
混合III 50th插入式配件模拟装置的低速弯头滑块试验规程

Low Speed Knee Slider Test Procedure for the Hybrid III 50th Male Dummy

SAE J 2876-2009 发布历史

This procedure establishes a recommended practice for performing a Low Speed Knee Slider test to the Hybrid III 50thMale Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand from industry tohave a certification test which produces similar results to an actual low energy automotive impact test. An inherentproblem exists with the current certification procedure because the normal (2.75 m/s) knee slider test has test corridors that do not represent typical displacements seen in these low energy impact tests. The normal test corridors specify aforce requirement at 10 mm and at 18 mm, while the low speed test needs to have a peak displacement around 10 mm.1.1 PurposeThe intent of this recommended practice is to develop a low speed knee slider test procedure for the H-III50M dummy witha 10 mm deflection range.

SAE J 2876-2009由美国机动车工程师协会 US-SAE 发布于 2009-03-05。

SAE J 2876-2009 在中国标准分类中归属于: R17 公路车辆维修设备，在国际标准分类中归属于: 43.180 检查、维修和试验设备。

SAE J 2876-2009的历代版本如下：

• 2009年03月05日 SAE J 2876-2009 混合III 50th插入式配件模拟装置的低速弯头滑块试验规程

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE J 2876-2009 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE J 2876-2009

发布日期

2009年03月05日

实施日期

废止日期

无

中国标准分类号

R17

国际标准分类号

43.180

发布单位

US-SAE

引用标准

SAE EA-23 SAE J211/1 Motor Vehicle Regulation No. 572

适用范围

This procedure establishes a recommended practice for performing a Low Speed Knee Slider test to the Hybrid III 50thMale Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand from industry tohave a certification test which produces similar results to an actual low energy automotive impact test. An inherentproblem exists with the current certification procedure because the normal (2.75 m/s) knee slider test has test corridors that do not represent typical displacements seen in these low energy impact tests. The normal test corridors specify aforce requirement at 10 mm and at 18 mm, while the low speed test needs to have a peak displacement around 10 mm.1.1 PurposeThe intent of this recommended practice is to develop a low speed knee slider test procedure for the H-III50M dummy witha 10 mm deflection range.

谁引用了SAE J 2876-2009 更多引用