BS EN 777-1:2009
非家用多燃烧器的燃气高架辐射管加热器系统.第1部分:系统D.安全性

Multi-burner gas-fired overhead radiant tube heater systems for nondomestic use Part 1: System D — Safety

标准号

BS EN 777-1:2009

发布

2009年

发布单位

英国标准学会

当前最新

BS EN 777-1:2009

 

 

引用标准

EN 10226-1:2004 EN 10226-2:2005 EN 126:2004 EN 161:2007 EN 257 EN 298:2003 EN 437:2003 EN 60335-1:2002 EN 60335-2-102:2006 EN 60529:1992 EN 60584-1:1995 EN 60584-2:1993 EN 88-1:2007 EN ISO 228-1:2003 EN ISO 6976:2005 ISO 70 ISO 7005-1:1992 ISO 7005-2:1988

被代替标准

BS EN 777-1:1999

适用范围

This European Standard specifies the requirements and test methods for the construction, safety, classification and marking of non-domestic gas-fired overhead radiant tube heaters incorporated into a multi-burner system (called system D and referred to in the body of the text as the “system”) with each burner unit under the control of an automatic burner control system. This standard is applicable to Type B52 systems (see 4.3) intended for use in other than domestic dwellings, in which the supply of combustion air and/or the evacuation of the products of combustion is achieved by mechanical means. This standard is not applicable to: a) systems designed for use in domestic dwelling; b) outdoor systems; c) systems of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference test gas); d) systems having a draught diverter; e) systems having fully pre-mixed gas and air burners in which: 1) either the gas and all the combustion air are brought together just before the level of the combustion zone; or 2) the pre-mixing of the gas and all combustion air is carried out in a part of the burner upstream of the combustion zone; f) systems that are designed for continuous condensation within the flue system under normal operating conditions; g) systems having combustion products evacuation ducts that are non-metallic. This standard is applicable to systems which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals. NOTE Requirements for systems which are not intended to be type tested would need to be subject to further consideration. Requirements concerning the rational use of energy have not been included in this European Standard.

BS EN 777-1:2009相似标准

推荐

BS EN 777-1:2009 中可能用到的仪器设备

谁引用了BS EN 777-1:2009 更多引用