DIN EN 1401-1-2009
地下排水和排污水用塑料管道系统.未增塑聚氯乙烯.第1部分:管道,配件和系统用规范,英文版本DIN EN 1401-1:2009-07

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system; English version of DIN EN 1401-1:2009-07

DIN EN 1401-1-2009 发布历史

This Part of EN 1401 specifies the requirements for solid wall pipes, fittings and the system of unplasticized poly(vinyl chloride) (PVC-U) piping systems in the field of non-pressure underground drainage and sewerage: a) outside the building structure (application area code "U") and b) both buried in ground within the building structure (application area code "D") and outside the building. This is reflected in the marking of products by "U" and "UD". It also specifies the test parameters for the test methods referred to in this European Standard. This European Standard covers a range of nominal sizes, a range of pipes and fittings series and a range of stiffness classes and gives recommendations concerning colours. NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selection from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. In conjunction with prCEN/TS 1401-2 [1] and ENV 1401-3 [2] it is applicable to PVC-U pipes and fittings, their joints and to joints with components of other plastics and non-plastics materials intended to be used for buried piping systems for non-pressure underground drainage and sewerage. This European Standard is applicable to non foamed PVC-U pipes without a socket as well as pipes with an integral socket. The fittings can be manufactured by injection-moulding or be fabricated from pipes and/or mouldings. Requirements and limiting values for application area code "D" are given in Table 4, Table 6, Table 13 and Table 15. NOTE 2 Pipes, fittings and other components conforming to any of the plastics product standards listed in Annex C can be used with pipes and fittings conforming to this European Standard, provided they conform to the requirements for joint dimensions given in Clause 6 and to the requirements of Table 15.

DIN EN 1401-1-2009由德国标准化学会 DE-DIN 发布于 2009-07。

DIN EN 1401-1-2009 在中国标准分类中归属于: Q81 供水、排水器材设备。

DIN EN 1401-1-2009 发布之时，引用了标准

• EN 580 塑料管道系统.未增塑聚氯乙烯(PVC-U)管.特定温度下耐二氯甲烷的试验方法
• EN 681-1 弹性密封件.水和污水设施用管联接密封件的材料要求.第1部分:琉化橡胶.包含修改件A1-1998 和 A2-2002;合并勘误表-2002年8月;包含修改件A3-2005
• EN 681-2 弹性密封件.输水和污水设施用管联接密封件的材料要求.第2部分:热塑性弹性件.包含修改件A1-2002和A2-2005
• EN 727 塑料管道和导管系统.热塑性管和配件.维卡(Vicat)软化温度(VST)的测定
• EN 744-1995 塑料管道和导管系统.热塑管.耐连续吹风的试验方法
• EN 922 塑料管道和管道输送系统.未增塑聚氯乙烯管和管件.测定粘度数值和K值计算用试样制备
• EN 1053 塑料管道系统.无压力情况下使用的热塑管道系统.防水性的检验方法
• EN 1055-1996 塑料管道系统.粪便和污水排放用热塑管道系统.抗周期性升温的试验方法
• EN 1277-2003 塑料管道系统.地下无压用热塑性管道系统.弹性密封环型接头密封性的试验方法*， 2022-07-23 更新
• EN 1411-1996 塑料管和导管系统.热塑性塑料管.用梯级法测定抗外冲击应力的能力
• EN 1905 塑料管道系统.硬聚氯乙烯管,管件和材料.基于氯的总含量评估聚氯乙烯含量的方法
• EN 10204-2004 金属材料.检验文件的类型*， 2022-07-23 更新
• EN 12061 塑料管道系统.热塑配件.耐冲击的试验方法
• EN 12256 塑料管道系统.热塑性塑料配件.装配式配件机械强度或挠度的试验方法
• EN ISO 472-2001 塑料.词汇
• EN ISO 580 塑料管和管道系统.喷射铸造热塑性配件.热效应直观评估法 ISO 580-2005
• EN ISO 1043-1-2001 
• EN ISO 1183-1 塑料.non-cellular塑料密度的确定方法.第1部分:液浸法,液体比重瓶法和滴定法*， 2022-07-23 更新
• EN ISO 2505 热塑性管.纵向回缩的试验方法和参数.(ISO 2505)-2005;-1994［代替:CEN EN 743］
• EN ISO 3126 塑料管系统.塑料部件.尺寸的测定
• EN ISO 9969 热塑性塑料管材.环刚度的测定(ISO 9969:2016)*， 2016-01-01 更新

* 在 DIN EN 1401-1-2009 发布之后有更新，请注意新发布标准的变化。

DIN EN 1401-1-2009的历代版本如下：

• 2009年07月 DIN EN 1401-1-2009 地下排水和排污水用塑料管道系统.未增塑聚氯乙烯.第1部分:管道,配件和系统用规范,英文版本DIN EN 1401-1:2009-07

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 1401-1-2009 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 1401-1-2009

发布日期

2009年07月

实施日期

废止日期

无

中国标准分类号

Q81

发布单位

DE-DIN

引用标准

EN 580 EN 681-1 EN 681-2 EN 727 EN 744-1995 EN 922 EN 1053 EN 1055-1996 EN 1277-2003 EN 1411-1996 EN 1905 EN 10204-2004 EN 12061 EN 12256 EN ISO 472-2001 EN ISO 580 EN ISO 1043-1-2001 EN ISO 1167-1-2006 EN ISO 1183-1 EN ISO 2505 EN ISO 3126 EN ISO 9969

被代替标准

DIN EN 1401-1-1998 DIN EN 1401-1-2006

适用范围

This Part of EN 1401 specifies the requirements for solid wall pipes, fittings and the system of unplasticized poly(vinyl chloride) (PVC-U) piping systems in the field of non-pressure underground drainage and sewerage: a) outside the building structure (application area code "U") and b) both buried in ground within the building structure (application area code "D") and outside the building. This is reflected in the marking of products by "U" and "UD". It also specifies the test parameters for the test methods referred to in this European Standard. This European Standard covers a range of nominal sizes, a range of pipes and fittings series and a range of stiffness classes and gives recommendations concerning colours. NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selection from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. In conjunction with prCEN/TS 1401-2 [1] and ENV 1401-3 [2] it is applicable to PVC-U pipes and fittings, their joints and to joints with components of other plastics and non-plastics materials intended to be used for buried piping systems for non-pressure underground drainage and sewerage. This European Standard is applicable to non foamed PVC-U pipes without a socket as well as pipes with an integral socket. The fittings can be manufactured by injection-moulding or be fabricated from pipes and/or mouldings. Requirements and limiting values for application area code "D" are given in Table 4, Table 6, Table 13 and Table 15. NOTE 2 Pipes, fittings and other components conforming to any of the plastics product standards listed in Annex C can be used with pipes and fittings conforming to this European Standard, provided they conform to the requirements for joint dimensions given in Clause 6 and to the requirements of Table 15.

谁引用了DIN EN 1401-1-2009 更多引用