DIN EN 416-1-2009
非家用单头燃烧器高架燃气辐射管加热器.第1部分:安全性.英文版本DIN EN 416-1-2009-09

Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety; English version of DIN EN 416-1:2009-09

DIN EN 416-1-2009 发布历史

This European Standard specifies the requirements and test methods for the construction, safety, classification and marking of non-domestic gas fired overhead radiant tube heaters incorporating a single burner system under the control of an automatic burner control system, referred to in the body of the text as 'appliances'. This standard is applicable to Type A2, A3, B12, B13, B22, B23, B42, B43, B52, R53, O12, O13, 032 and 033 appliances intended for use in other than domestic dwellings, in which the supply of combustion air and/or the evacuation of the products of combustion is achieved by mechanical means located upstream of the draught diverter, if provided. This standard is not applicable to: a) appliances designed for use in domestic dwelling; b) outdoor appliances; c) appliances of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference test gas); d) appliances having fully pre-mixed gas and air burners in which: 1) either the gas and all the combustion air are brought together just before the level of the combustion zone; or 2) the pre-mixing of the gas and all combustion air is carried out in a part of the burner upstream of the combustion zone; e) appliances that are designed for continuous condensation within the flue system under normal operating conditions; f) appliances having combustion products evacuation ducts that are non-metallic. This standard is applicable to appliances which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals. NOTE Requirements for appliances which are not intended to be type tested would need to be subject to further consideration. Requirements concerning the rational use of energy have not been included in this European Standard.

DIN EN 416-1-2009由德国标准化学会 DE-DIN 发布于 2009-09，并于 2009-09-01 实施。

DIN EN 416-1-2009 在中国标准分类中归属于: Q83 供热器材设备，在国际标准分类中归属于: 97.100.20 气体加热器。

DIN EN 416-1-2009 发布之时，引用了标准

• EN 88-1-2007 
• EN 126-2004 燃气设备用多功能控制装置
• EN 161-2007 
• EN 257-1992 燃气器具用机械式恒温器
• EN 298-2003 带或不带鼓风机的燃气炉及燃气装置用自动燃气控制系统
• EN 437-2003 试验气体.试验压力.器具分类.包含修改件A1-2009
• EN 10226-1-2004 有压力紧固连接件的管道螺纹.第1部分:锥形外螺纹和平行内螺纹.尺寸,公差和名称与符号
• EN 10226-2-2005 螺纹上压力强密联接的管螺纹.第2部分:锥形外螺纹和锥形内螺纹.尺寸,公差及名称和符号
• EN 13410 燃气顶部辐射加热器.非家用房屋的通风要求.合并勘误表-2002年7月
• EN 60335-1-2002 家用和类似用途电器的安全.第1部分:一般要求;包含修改件A2-2006,A11-2004和A12-2006;合并勘误表2007年1月;包含修改件A13-2008;合并勘误表2009年7月*， 2022-07-23 更新
• EN 60335-2-102-2006 家用和类似用途电器的安全.第2-102部分:有电连接的气体,油和固体燃烧燃烧设备的特殊要求 IEC 60335-2-102-2004 修改件;替代EN 50165-1997;现行有效
• EN 60584-1-1995 热电偶.第1部分:参考表(IEC 584-1-1995)
• EN 60584-2-1993 热电偶.第2部分:公差( IEC 584-2-1982+A1-1989)
• EN ISO 228-1-2003 非螺纹密封的管螺纹.第1部分:标记,尺寸和公差 ISO 228-1-2000
• EN ISO 3166-1-2006 国家名称及其地区名称的表示代码.第1部分:国家代码*， 2022-07-23 更新
• EN ISO 6976-2005 天燃气.热值,密度和相对密度及化合物沃泊指数的计算
• ISO 2 纺织品 纱线及其制品捻向的表示法

* 在 DIN EN 416-1-2009 发布之后有更新，请注意新发布标准的变化。

DIN EN 416-1-2009的历代版本如下：

• 2009年09月 DIN EN 416-1-2009 非家用单头燃烧器高架燃气辐射管加热器.第1部分:安全性.英文版本DIN EN 416-1-2009-09

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 416-1-2009 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 416-1-2009

发布日期

2009年09月

实施日期

2009年09月01日

废止日期

无

中国标准分类号

Q83

国际标准分类号

97.100.20

发布单位

DE-DIN

引用标准

EN 88-1-2007 EN 126-2004 EN 161-2007 EN 257-1992 EN 298-2003 EN 437-2003 EN 10226-1-2004 EN 10226-2-2005 EN 13410 EN 60335-1-2002 EN 60335-2-102-2006 EN 60529-1992 EN 60584-1-1995 EN 60584-2-1993 EN ISO 228-1-2003 EN ISO 3166-1-2006 EN ISO 6976-2005 ISO 2

被代替标准

DIN EN 416-1-1999 DIN EN 416-1/A1-2001 DIN EN 416-1/A2-2002 DIN EN 416-1/A3-2002 DIN EN 416-1-2006

适用范围

This European Standard specifies the requirements and test methods for the construction, safety, classification and marking of non-domestic gas fired overhead radiant tube heaters incorporating a single burner system under the control of an automatic burner control system, referred to in the body of the text as 'appliances'. This standard is applicable to Type A2, A3, B12, B13, B22, B23, B42, B43, B52, R53, O12, O13, 032 and 033 appliances intended for use in other than domestic dwellings, in which the supply of combustion air and/or the evacuation of the products of combustion is achieved by mechanical means located upstream of the draught diverter, if provided. This standard is not applicable to: a) appliances designed for use in domestic dwelling; b) outdoor appliances; c) appliances of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference test gas); d) appliances having fully pre-mixed gas and air burners in which: 1) either the gas and all the combustion air are brought together just before the level of the combustion zone; or 2) the pre-mixing of the gas and all combustion air is carried out in a part of the burner upstream of the combustion zone; e) appliances that are designed for continuous condensation within the flue system under normal operating conditions; f) appliances having combustion products evacuation ducts that are non-metallic. This standard is applicable to appliances which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals. NOTE Requirements for appliances which are not intended to be type tested would need to be subject to further consideration. Requirements concerning the rational use of energy have not been included in this European Standard.

DIN EN 416-1-2009系列标准