DIN SPEC 1130-2010
土质.土壤和土壤材料的连续化学和毒物学测试的浸出过程.第3部分:上流过滤试验(ISO/TS 21268-3-2007).德文版本CEN ISO/TS 21268-3-2009

Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 3: Up-flow percolation test (ISO/TS 21268-3:2007); German version CEN ISO/TS 21268-3:2009

DIN SPEC 1130-2010 发布历史

DIN ISO/TS 21268-3 specifies a test, which is aimed at determining the leaching behaviour of inorganic and organic constituents from a soil and soil material. The method is a once-through percolation test with water (0,001 mol/L CaCl2) under standardised conditions of flow rate. The material is leached under dynamic hydraulic conditions. The eluates obtained can be used to determine the ecological properties of the soil with respect to micro-organisms, flora and fauna. The test results enable the distinction between different release patterns, for instance wash-out and release under the influence of interaction with the matrix, when approaching local equilibrium between material and leachant. The test procedure specified in DIN ISO/TS 21268-3 produces eluates, which are subsequently characterised by existing physical, chemical and ecotoxicological standard methods. This test is mainly aimed at use for routine and control purposes, and alone it cannot be used to describe all leaching properties of a soil. Additional leaching tests are needed for that extended goal.

DIN SPEC 1130-2010由德国标准化学会 DE-DIN 发布于 2010-02。

DIN SPEC 1130-2010 在中国标准分类中归属于: B11 土壤、水土保持，在国际标准分类中归属于: 13.080.05 土壤检验综合。

DIN SPEC 1130-2010 发布之时，引用了标准

• ISO 3696 分析实验室用水 规范和试验方法
• ISO 5667-3 水质.采样.第3部分:水样保存和处理指南
• ISO 7027-1999 水质 浊度的测定
• ISO 10381-1 土质.取样.第1部分:取样方法的设计指南
• ISO 10381-2 土质.取样.取样方法指南
• ISO 10381-3 土壤质量 取样 第3部分：安全指南
• ISO 10381-4 土质.取样.第4部分:天然、接近天然和耕作地区的调查程序指南
• ISO 10381-5 土壤质量.取样.第5部分:城市和工业场所土壤污染调查方法指南
• ISO 10381-6 土壤质量.取样.第6部分:实验室中微生物工艺、生物统计和多样性评估用有氧条件下土壤的收集、处理和存贮的指南
• ISO 10523 水质 pH值测定
• ISO 11465 土壤质量 土壤生物的干物质和水含量的测定 重量法

DIN SPEC 1130-2010的历代版本如下：

• 2010年02月 DIN SPEC 1130-2010 土质.土壤和土壤材料的连续化学和毒物学测试的浸出过程.第3部分:上流过滤试验(ISO/TS 21268-3-2007).德文版本CEN ISO/TS 21268-3-2009

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN SPEC 1130-2010 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN SPEC 1130-2010

发布日期

2010年02月

实施日期

废止日期

无

中国标准分类号

B11

国际标准分类号

13.080.05

发布单位

DE-DIN

引用标准

ISO 3696 ISO 5667-3 ISO 7027-1999 ISO 10381-1 ISO 10381-2 ISO 10381-3 ISO 10381-4 ISO 10381-5 ISO 10381-6 ISO 10523 ISO 11465

适用范围

DIN ISO/TS 21268-3 specifies a test, which is aimed at determining the leaching behaviour of inorganic and organic constituents from a soil and soil material. The method is a once-through percolation test with water (0,001 mol/L CaCl2) under standardised conditions of flow rate. The material is leached under dynamic hydraulic conditions. The eluates obtained can be used to determine the ecological properties of the soil with respect to micro-organisms, flora and fauna. The test results enable the distinction between different release patterns, for instance wash-out and release under the influence of interaction with the matrix, when approaching local equilibrium between material and leachant. The test procedure specified in DIN ISO/TS 21268-3 produces eluates, which are subsequently characterised by existing physical, chemical and ecotoxicological standard methods. This test is mainly aimed at use for routine and control purposes, and alone it cannot be used to describe all leaching properties of a soil. Additional leaching tests are needed for that extended goal.

谁引用了DIN SPEC 1130-2010 更多引用