DIN EN 12336-2010
隧道掘进机.盾构机、止推钻孔机、螺旋钻探机、衬里安装设备.安全要求

Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements; German version EN 12336:2005+A1:2008

DIN EN 12336-2010 发布历史

This document is applicable to all types of shield machines and associated back up equipment, thrust boring machines, auger boring machines and lining erection equipment. It specifies the essential safety requirements for the design, installation, maintenance, and information for use of such machines. Shield machines and associated back up equipment include: - open shields for both manual and mechanical excavation; - shielded tunnel boring machines; - micro tunnelling machines; - towed or stationary back up equipment; - pipe jacking equipment. All shield machines provide lateral and radial ground support. In addition they may provide various types of face support and ground water control (see Clause 3). Certain associated matters are not included in the scope of the standard: - additional equipment which may form an integral part of a shield machine or back up equipment and is used for compressed air (hyperbaric/plenum) working (see EN 12110:2002); - use under hyperbaric conditions; - the supply of electricity up to the machine; - ancillary tools and equipment used for, at or on the machine; - electromagnetic compatibility; - loading and transport equipment which is not an integral part of the machine, e. g. rolling stock, man riders, grout cars, segment cars, muck cars. NOTE Within the European Union Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this document. The present document is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC. 1.2 Hazards This document deals with significant hazards, hazardous situations and events relevant to shield machines and associated back up equipment, thrust boring machines and auger boring machines when they are used as intended and under the conditions foreseen by the manufacturer (see C)

DIN EN 12336-2010由德国标准化学会 DE-DIN 发布于 2010-03，并于 2010-03-01 实施。

DIN EN 12336-2010 在中国标准分类中归属于: P97 建筑工程施工机械，在国际标准分类中归属于: 91.220 施工设备,93.060 隧道建筑。

DIN EN 12336-2010 发布之时，引用了标准

• EN 3-7-2004 便携式灭火器.第7部分:特性,性能要求和试验方法;包含修改件A1-2007
• EN 294-1992 机械安全.与上肢可及范围的危险部位的安全距离
• EN 418-1992 机械的安全.紧急制动设备.功能特性.设计原则
• EN 563-1994 
• EN 620-2002 连续搬运设备和系统.散装物料搬运用固定带式传送装置的安全和电磁兼容性(EMC)要求
• EN 894-3-2000 机械安全.显示器和控制致动器设计的人类工程学要求.第3部分:控制致动器.包含修改件A1-2008
• EN 954-1-1996 机械安全.控制系统部件的安全.第1部分:设计的一般原则
• EN 981-1996 机械安全.危险信号的视听系统;包含修改件A1-2008
• EN 982-1996 机械安全.液力系统和部件的安全要求.液压装置.包含修改件A1-2008
• EN 983-1996 机械安全.液力系统及其部件的安全要求.气压装置;包含修改件A1-2008
• EN 1088-1995 机械安全.和保护装置相连的锁紧装置.设计和选择的原则.包含修改件A2-2008
• EN 1837-1999 机械安全.机械的整体照明.包含修改件A1-2009
• EN 12094-1-2003 固定式消防系统.气体灭火系统的部件.第1部分:电自动控制和延迟装置的试验方法和要求
• EN 13627-2000 
• EN 60204-1-1997 
• EN 60204-11-2000 机械安全性.机械电气设备.第11部分:电压超过1000 V a.c.或1500V d.c.和36 KV以下的HV设备的要求;合并勘误表2010年2月*， 2022-07-23 更新
• EN 60439-1-1999 
• EN 60439-2-2000 
• EN 60439-3 低压开关设备和控制设备.第3部分:对非专业人员可进入场地的低压成套开关设备和控制设备.配电板的特殊要求

* 在 DIN EN 12336-2010 发布之后有更新，请注意新发布标准的变化。

DIN EN 12336-2010的历代版本如下：

• 2010年03月 DIN EN 12336-2010 隧道掘进机.盾构机、止推钻孔机、螺旋钻探机、衬里安装设备.安全要求

DIN EN 12336-2010 于 2014-09 变更为 DIN EN 16191-2014 隧道机械. 安全要求; 德文版本EN 16191-2014。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 12336-2010 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 12336-2010

发布日期

2010年03月

实施日期

2010年03月01日

废止日期

无

中国标准分类号

P97

国际标准分类号

91.220;93.060

发布单位

DE-DIN

引用标准

EN 3-7-2004 EN 294-1992 EN 418-1992 EN 563-1994 EN 620-2002 EN 894-3-2000 EN 954-1-1996 EN 981-1996 EN 982-1996 EN 983-1996 EN 1088-1995 EN 1837-1999 EN 12094-1-2003 EN 13627-2000 EN 60204-1-1997 EN 60204-11-2000 EN 60439-1-1999 EN 60439-2-2000 EN 60439-3

代替标准

DIN EN 16191-2014

被代替标准

DIN EN 12336/A1-2008 DIN EN 12336-2005

适用范围

This document is applicable to all types of shield machines and associated back up equipment, thrust boring machines, auger boring machines and lining erection equipment. It specifies the essential safety requirements for the design, installation, maintenance, and information for use of such machines. Shield machines and associated back up equipment include: - open shields for both manual and mechanical excavation; - shielded tunnel boring machines; - micro tunnelling machines; - towed or stationary back up equipment; - pipe jacking equipment. All shield machines provide lateral and radial ground support. In addition they may provide various types of face support and ground water control (see Clause 3). Certain associated matters are not included in the scope of the standard: - additional equipment which may form an integral part of a shield machine or back up equipment and is used for compressed air (hyperbaric/plenum) working (see EN 12110:2002); - use under hyperbaric conditions; - the supply of electricity up to the machine; - ancillary tools and equipment used for, at or on the machine; - electromagnetic compatibility; - loading and transport equipment which is not an integral part of the machine, e. g. rolling stock, man riders, grout cars, segment cars, muck cars. NOTE Within the European Union Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this document. The present document is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC. 1.2 Hazards This document deals with significant hazards, hazardous situations and events relevant to shield machines and associated back up equipment, thrust boring machines and auger boring machines when they are used as intended and under the conditions foreseen by the manufacturer (see C)

DIN EN 12336-2010 中可能用到的仪器设备