IEC 62282-6-100-2010
燃料电池技术.第6-100部分:微型燃料电池动力系统.安全性
Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
IEC 62282-6-100-2010 发布历史
a) This consumer safety standard covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges that are wearable or easily carried by hand, providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA. Portable fuel cell power systems that provide output levels that exceed these electrical limits are covered by IEC 62282-5-1. b) Externally accessible circuitry is therefore considered to be safety extra low voltage (SELV) circuitry as defined in IEC 60950-1:2005, and as limited power circuits if further compliance with 2.5 of IEC 60950-1:2005 is demonstrated. Micro fuel cell power systems or units that have internal circuitry exceeding 60 V d.c. or 240 VA should be appropriately evaluated in accordance with the separate criteria of IEC 60950-1:2005. c) This consumer safety standard covers all micro fuel cell power systems, micro fuel cell power units and fuel cartridges. This standard establishes requirements for all micro fuel cell power systems, micro fuel cell power units and fuel cartridges to ensure a reasonable degree of safety for normal use, reasonably foreseeable misuse, and consumer transportation of such items. The fuel cartridges covered by this standard are not intended to be refilled by the consumer. Fuel cartridges refilled by the manufacturer or by trained technicians shall meet all requirements of this standard. d) These products are not intended for use in hazardous areas as defined by IEV 426-03-01.
IEC 62282-6-100-2010由国际电工委员会 IX-IEC 发布于 2010-03。
IEC 62282-6-100-2010 在中国标准分类中归属于: K82 化学电源，在国际标准分类中归属于: 27.070 燃料电池。
IEC 62282-6-100-2010 发布之时，引用了标准
- IEC 62133-2002 含碱性或其它非酸性电解液的蓄电池和蓄电池组.便携式密封蓄电池和蓄电池组的安全要求
- IEC 62281-2004 运输途中原电池和二次锂电池及蓄电池组的安全
- ISO 175 塑料.液态化学品浸入效应的测定用试验方法*， 2010-10-01 更新
- ISO 188 硬化或热塑橡胶加速老化和耐热性测定*， 2011-10-01 更新
- ISO 1817 硫化橡胶或热塑性橡胶.液体影响的测定*， 2022-06-01 更新
- IEC 60050-426-2008 国际电工词汇.第426章:爆炸性环境用设备
- IEC 60079-15-2005 爆炸性气体环境用电气设备 第15部分:"n"防护型电气设备的结构、试验和标记
- IEC 60086-4 原电池.第4部分:锂电池的安全性*， 2019-04-25 更新
- IEC 60086-5 原电池.第5部分:含水电解质电池的安全性*， 2021-09-30 更新
- IEC 60695-1-1 着火危险试验 第1-1部分:电工产品着火危险评定指南 通用指南
- IEC 60730-1-1999 家用和类似用途的电气自动控制器 第1部分:一般要求
- IEC 60950-1-2005 信息技术设备.安全.第1部分:一般要求
- IEC 61032-1997 外壳对人体和设备的防护 检验用探头
- ISO 9772 泡沫塑料. 小火焰小试样的水平燃烧特性的测定*， 2020-10-31 更新
- ISO 15649 石油和天然气工业 管道
- ISO 16000-3 室内空气.第3部分:室内和试验室空气中甲醛和其他羰基化合物的测定.活性取样法*， 2022-09-22 更新
- ISO 16000-6 ISO 16000-6-2021
* 在 IEC 62282-6-100-2010 发布之后有更新，请注意新发布标准的变化。
IEC 62282-6-100-2010的历代版本如下：
- 2010年03月 IEC 62282-6-100-2010 燃料电池技术.第6-100部分:微型燃料电池动力系统.安全性
- 2012年10月12日 IEC 62282-6-100-2010/AMD1-2012 修改件1.燃料电池技术.第6-100部分:微型燃料电池动力系统.安全性
IEC 62282-6-100-2010 肥料.无机酸中的可溶性磷的提取 由 IEC/PAS 62282-6-1-2006 变更而来。
- 标准号
- IEC 62282-6-100-2010
- 发布日期
- 2010年03月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- K82
- 国际标准分类号
- 27.070
- 发布单位
- IX-IEC
- 引用标准
- IEC 62133-2002 IEC 62281-2004 ISO 175 ISO 188 ISO 1817 IEC 60050-426-2008 IEC 60079-15-2005 IEC 60086-4 IEC 60086-5 IEC 60695-1-1 IEC 60695-2-11 IEC 60695-11-10 IEC 60730-1-1999 IEC 60950-1-2005 IEC 61032-1997 ISO 9772 ISO 15649 ISO 16000-3 ISO 16000-6 IS
- 被代替标准
- IEC 105/255/FDIS-2009 IEC/PAS 62282-6-1-2006 IEC/PAS 62282-6-1 Corrigendum 1-2007
- 适用范围
- a) This consumer safety standard covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges that are wearable or easily carried by hand, providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA. Portable fuel cell power systems that provide output levels that exceed these electrical limits are covered by IEC 62282-5-1. b) Externally accessible circuitry is therefore considered to be safety extra low voltage (SELV) circuitry as defined in IEC 60950-1:2005, and as limited power circuits if further compliance with 2.5 of IEC 60950-1:2005 is demonstrated. Micro fuel cell power systems or units that have internal circuitry exceeding 60 V d.c. or 240 VA should be appropriately evaluated in accordance with the separate criteria of IEC 60950-1:2005. c) This consumer safety standard covers all micro fuel cell power systems, micro fuel cell power units and fuel cartridges. This standard establishes requirements for all micro fuel cell power systems, micro fuel cell power units and fuel cartridges to ensure a reasonable degree of safety for normal use, reasonably foreseeable misuse, and consumer transportation of such items. The fuel cartridges covered by this standard are not intended to be refilled by the consumer. Fuel cartridges refilled by the manufacturer or by trained technicians shall meet all requirements of this standard. d) These products are not intended for use in hazardous areas as defined by IEV 426-03-01.