ISO 9117-3-2010
涂料和清漆.烘干试验.第3部分:抽选用表面烘干试验
Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini
ISO 9117-3-2010 发布历史
This part of ISO 9117 specifies a test method for determining the surface-drying characteristics of a coating of a paint or varnish which dries by the action of air or by chemical reaction of its components. The method is not intended to apply to stoving products. The method described may be carried out: ⎯ as a “go/no go” test, by determining the surface-drying state after a specified time, to assess compliance with a particular requirement; ⎯ by determining the surface-drying state at suitable intervals until the surface-drying time is obtained.
ISO 9117-3-2010由国际标准化组织 IX-ISO 发布于 2010-03。
ISO 9117-3-2010 在中国标准分类中归属于: G50 涂料基础标准与通用方法，在国际标准分类中归属于: 87.040 涂料和清漆。
ISO 9117-3-2010 发布之时，引用了标准
- ISO 1513 涂料和清漆.试验样本的检验和制备*， 2010-05-01 更新
- ISO 1514 色漆和清漆.试验用标准样板*， 2016-08-01 更新
- ISO 2808 ISO 2808-2019
- ISO 15528 油漆 清漆和原料用于油漆和清漆 - 取样*， 2020-05-13 更新
* 在 ISO 9117-3-2010 发布之后有更新，请注意新发布标准的变化。
ISO 9117-3-2010的历代版本如下：
- 2010年03月 ISO 9117-3-2010 涂料和清漆.烘干试验.第3部分:抽选用表面烘干试验
ISO 9117-3-2010 IEC-821-VME总线.1比特至4比特数据用微处理系统总线［替代:CENELEC HD 524 S1］ 由 ISO 1517-1973 变更而来。
- 标准号
- ISO 9117-3-2010
- 发布日期
- 2010年03月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- G50
- 国际标准分类号
- 87.040
- 发布单位
- 国际标准化组织
- 引用标准
- ISO 1513 ISO 1514 ISO 2808 ISO 15528
- 被代替标准
- ISO 1517-1973 ISO/FDIS 9117-3-2009
- 适用范围
- This part of ISO 9117 specifies a test method for determining the surface-drying characteristics of a coating of a paint or varnish which dries by the action of air or by chemical reaction of its components. The method is not intended to apply to stoving products. The method described may be carried out: ⎯ as a “go/no go” test, by determining the surface-drying state after a specified time, to assess compliance with a particular requirement; ⎯ by determining the surface-drying state at suitable intervals until the surface-drying time is obtained.