SAE ARP 5376B-2010
液压流体的固体颗粒污染系统取样和测量用方法、地点和标准

Methods, Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids

SAE ARP 5376B-2010 发布历史

This SAE Aerospace Recommended Practice (ARP) provides procedures for assuring cleanliness of sampling equipment, for performing the sampling process, and for measuring and reporting the sample particle count. The ARP gives procedures for cleaning sample bottles, when used, and recommends the solvents to be applied and how these solvents should be prepared. Requirements for the selection of the sampling point, sampling method, and sampling frequency are also specified. This ARP also recommends three measuring methods for determining the level of solid particle contamination of hydraulic fluids used in aerospace hydraulics. These are: a. on-line automatic particle counting; b. automatic particle counting method using bottle samples; and c. microscopic particle count method using bottle samples.

SAE ARP 5376B-2010由美国机动车工程师协会 US-SAE 发布于 2010-03-08。

SAE ARP 5376B-2010 在中国标准分类中归属于: V29 航天用液压元件与附件，在国际标准分类中归属于: 49.080 航空航天用流体系统和零部件。

SAE ARP 5376B-2010 发布之时，引用了标准

• ISO 3722-1976 液压传动 油液取样容器 净化方法的鉴定和控制
• ISO 4407-2002 液压传动 液体污染 采用光学显微镜测定颗粒污染度的方法
• ISO 11171-1999 液压传动 液体自动颗粒计数器的校准
• ISO 11500-2008 液压传动.用遮光法自动颗粒计算对液体样品的颗粒污染物等级的测定
• ISO 11943-1999 液压传动 在线液体自动颗粒计数系统 校准和验证的方法
• SAE ARP 4285-2001 宇航液压系统液体中微粒污染物的膜评估程序
• SAE AS 4059E-2005 航空航天液力.液压液的清洁度分级

SAE ARP 5376B-2010的历代版本如下：

• 2010年03月08日 SAE ARP 5376B-2010 液压流体的固体颗粒污染系统取样和测量用方法、地点和标准

SAE ARP 5376B-2010 由 SAE ARP 5376A-2003 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE ARP 5376B-2010 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE ARP 5376B-2010

发布日期

2010年03月08日

实施日期

废止日期

无

中国标准分类号

V29

国际标准分类号

49.080

发布单位

US-SAE

引用标准

ISO 3722-1976 ISO 4407-2002 ISO 11171-1999 ISO 11500-2008 ISO 11943-1999 SAE ARP 598 SAE ARP 4285-2001 SAE AS 4059E-2005

被代替标准

SAE ARP 5376A-2003

适用范围

This SAE Aerospace Recommended Practice (ARP) provides procedures for assuring cleanliness of sampling equipment, for performing the sampling process, and for measuring and reporting the sample particle count. The ARP gives procedures for cleaning sample bottles, when used, and recommends the solvents to be applied and how these solvents should be prepared. Requirements for the selection of the sampling point, sampling method, and sampling frequency are also specified. This ARP also recommends three measuring methods for determining the level of solid particle contamination of hydraulic fluids used in aerospace hydraulics. These are: a. on-line automatic particle counting; b. automatic particle counting method using bottle samples; and c. microscopic particle count method using bottle samples.