DIN 1054-2005
建筑地基.土方工程和地基的安全验收已作废

Ground - Verification of the safety of earthworks and foundations

DIN 1054-2005 发布历史

The standard concerns the load bearing capacity and usability of earthworks and foundations. It deals with the production and use and includes the changes of existing building structures. It defines limit status determined by soil and/or rocks and contains basis and rules for related verification. The standard applies primarily to the following structures and substructures: a) foundations, e.g. shallow foundations, pile foundations; b) retaining structures, e.g. gravity walls; c) slope stabilisations, e.g. by means of soil and rock nails; d) structures embedded in the ground, e.g. open-cut tunnels; e) temporary geotechnical structures, e.g. retaining walls for excavations; f) earthworks, e.g. embankments, cuts. It also applies to natural slopes. The structures mentioned in b) to f) are known as geotechnical structures, in contrast to foundations. This contrast emphasizes the following points: -- for foundations, the actions imposed by the superstructure are generally provided by the designer of the structure; -- for geotechnical structures, the actions are principally dictated during the geotechnical design process. Open-cast coal mines are not covered by this standard. Different safety requirements apply to this field and are covered by other geological and geotechnical investigations, preliminary reconnaissance and monitoring. NOTE 1 In certain cases, a geotechnical structure can also be the foundation of a structure. NOTE 2 Further information on the scope is given at the beginning of clauses 7 to 12.

DIN 1054-2005由德国标准化学会 DE-DIN 发布于 2005-01，并于 2005-01-01 实施，于 2009-09 废止。

DIN 1054-2005 在中国标准分类中归属于: P22 地基、基础工程，在国际标准分类中归属于: 93.020 土方工程、挖掘、地基构造、地下工程。

DIN 1054-2005的历代版本如下：

• 2005年01月 DIN 1054-2005 建筑地基.土方工程和地基的安全验收
• 2010年12月 DIN 1054-2010 下层土.土方工程和基础安全性的验证-DIN EN 1997-1的补充规则
• 2021年04月 DIN 1054-2021 建筑地基. 土方工程和地基的安全性验收. DIN EN 1997-1标准的补充规则

DIN 1054-2005 建筑地基.土方工程和地基的安全验收 于 2010-12-01 变更为 DIN EN 1997-1/NA-2010 国家附录.国家制定参数.欧洲法规7:土工设计.第1部分:通用规则。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN 1054-2005 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN 1054-2005

发布日期

2005年01月

实施日期

2005年01月01日

废止日期

2009-09

中国标准分类号

P22

国际标准分类号

93.020

发布单位

DE-DIN

代替标准

DIN EN 1997-1-2009 DIN 1054-2010 DIN EN 1997-1/NA-2010

适用范围

The standard concerns the load bearing capacity and usability of earthworks and foundations. It deals with the production and use and includes the changes of existing building structures. It defines limit status determined by soil and/or rocks and contains basis and rules for related verification. The standard applies primarily to the following structures and substructures: a) foundations, e.g. shallow foundations, pile foundations; b) retaining structures, e.g. gravity walls; c) slope stabilisations, e.g. by means of soil and rock nails; d) structures embedded in the ground, e.g. open-cut tunnels; e) temporary geotechnical structures, e.g. retaining walls for excavations; f) earthworks, e.g. embankments, cuts. It also applies to natural slopes. The structures mentioned in b) to f) are known as geotechnical structures, in contrast to foundations. This contrast emphasizes the following points: -- for foundations, the actions imposed by the superstructure are generally provided by the designer of the structure; -- for geotechnical structures, the actions are principally dictated during the geotechnical design process. Open-cast coal mines are not covered by this standard. Different safety requirements apply to this field and are covered by other geological and geotechnical investigations, preliminary reconnaissance and monitoring. NOTE 1 In certain cases, a geotechnical structure can also be the foundation of a structure. NOTE 2 Further information on the scope is given at the beginning of clauses 7 to 12.

谁引用了DIN 1054-2005 更多引用