ISO 4081-2010
内燃机制冷系统用橡胶软管和管件.规范

Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification

ISO 4081-2010 发布历史

This International Standard specifies the requirements for straight or pre-formed rubber hoses and tubing for use in pressurized or unpressurized cooling circuits containing 1,2-ethanediol-based coolants in internalcombustion engines for vehicles with an unladen mass (as defined in ISO 1176) of 3,5 t or less. In addition, this specification may also be applied as a classification system to enable original equipment manufacturers (OEMs) to detail a “line call-out” of tests for specific applications where these are not covered by the main types specified (see example in Annex D). In this case, the hose or tubing would not carry any marking showing this ISO specification number but may detail the OEM's own identification markings as shown on their part drawings.

ISO 4081-2010由国际标准化组织 IX-ISO 发布于 2010-06。

ISO 4081-2010 在中国标准分类中归属于: T14 润滑、冷却系统与加热装置,G42 胶管、胶带、胶布，在国际标准分类中归属于: 83.140.40 软管。

ISO 4081-2010的历代版本如下：

• 1987年04月 ISO 4081-1987 橡胶 专用于卡车和轻型卡车上冷却软管和管道系统 规范
• 2005年04月 ISO 4081-2005 内燃机用制冷系统用橡胶软管和管件.规范
• 2010年06月 ISO 4081-2010 内燃机制冷系统用橡胶软管和管件.规范
• 2016年10月20日 ISO 4081-2016 内燃机冷却系统橡胶软管和管件 - 规格

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ISO 4081-2010 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

ISO 4081-2010

发布日期

2010年06月

实施日期

废止日期

无

中国标准分类号

T14;G42

国际标准分类号

43.060.30;83.140.40

发布单位

IX-ISO

适用范围

This International Standard specifies the requirements for straight or pre-formed rubber hoses and tubing for use in pressurized or unpressurized cooling circuits containing 1,2-ethanediol-based coolants in internalcombustion engines for vehicles with an unladen mass (as defined in ISO 1176) of 3,5 t or less. In addition, this specification may also be applied as a classification system to enable original equipment manufacturers (OEMs) to detail a “line call-out” of tests for specific applications where these are not covered by the main types specified (see example in Annex D). In this case, the hose or tubing would not carry any marking showing this ISO specification number but may detail the OEM's own identification markings as shown on their part drawings.