SAE AMS 3660D-2010
烧结的通用等级聚四氟乙烯(PTFE)模型

Polytetrafluoroethylene (PTFE) Moldings, General Purpose Grade, As Sintered

SAE AMS 3660D-2010 发布历史

This specification covers virgin, unfilled, polytetrafluoroethylene (PTFE) in the form of molded rods, tubes, and shapes. This specification does not apply to product over 12 inches (305 mm) in dimension parallel to the direction of applied molding pressure, rods under 0.750 inch (19.05 mm) in diameter, and tubes having wall thickness under 0.500 inch (12.70 mm). These moldings have been used typically for parts such as, bushings and insulators, requiring chemical inertness and good mechanical and electrical properties up to 500 °C (260 °F), but usage is not limited to such applications. For applications such as bearins, seals, and back-up rings that do not require dielectric properties it is recommended to use AMS 3678/1 Grade A.

SAE AMS 3660D-2010由美国机动车工程师协会 US-SAE 发布于 2010-06-16。

SAE AMS 3660D-2010在国际标准分类中归属于: 49.025.40 橡胶和塑料。

SAE AMS 3660D-2010的历代版本如下：

• 2010年06月16日 SAE AMS 3660D-2010 烧结的通用等级聚四氟乙烯(PTFE)模型

SAE AMS 3660D-2010 烧结的通用等级聚四氟乙烯(PTFE)模型 于 2011-08-25 变更为 SAE AMS 3660E-2011 烧结的通用等级聚四氟乙烯(PTFE)模型。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE AMS 3660D-2010 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE AMS 3660D-2010

发布日期

2010年06月16日

实施日期

废止日期

无

国际标准分类号

49.025.40

发布单位

US-SAE

代替标准

SAE AMS 3660E-2011

适用范围

This specification covers virgin, unfilled, polytetrafluoroethylene (PTFE) in the form of molded rods, tubes, and shapes. This specification does not apply to product over 12 inches (305 mm) in dimension parallel to the direction of applied molding pressure, rods under 0.750 inch (19.05 mm) in diameter, and tubes having wall thickness under 0.500 inch (12.70 mm). These moldings have been used typically for parts such as, bushings and insulators, requiring chemical inertness and good mechanical and electrical properties up to 500 °C (260 °F), but usage is not limited to such applications. For applications such as bearins, seals, and back-up rings that do not require dielectric properties it is recommended to use AMS 3678/1 Grade A.