ISO 11148-6:2010
手持式非电动工具.安全性要求.第6部分:螺纹结件用装配电动工具

Hand-held non-electric power tools.Safety requirements.Part 6: Assembly power tools for threaded fasteners


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 ISO 11148-6:2010 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
ISO 11148-6:2010
发布
2010年
发布单位
国际标准化组织
替代标准
ISO 11148-6:2012
当前最新
ISO 11148-6:2012
 
 
适用范围
IMPORTANT — The electronic file of this document contains colours that are considered useful for the correct understanding of the document. Users should consider printing this document using a colour printer. ISO 3864-1 provides colorimetric and photometric properties together with, as a guideline, references from colour order systems. This part of ISO 11148 applies to hand-held non-electric power tools (hereafter referred to as “assembly power tools for threaded fasteners”) intended for tightening or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 covers - air-hydraulic impulse wrenches; - impact wrenches; - fastener installation tools; - nutrunners; - open-ended spanners (crow-foot with open-ended socket or tube nut wrench); - ratchet wrenches; - screwdrivers. NOTE 1 For examples of assembly power tools for threaded fasteners, see Annex B. This part of ISO 11148 does not cover special requirements and modifications of assembly power tools for threaded fasteners for the purpose of mounting them in fixtures. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of assembly power tools for threaded fasteners in potentially explosive atmospheres. NOTE 2 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres.

ISO 11148-6:2010相似标准


推荐

干货 | 通用质量特性(“六性”)工作的开展 ——定性指标的分析与验证

GJB/Z 35-19935.2条,最高温的计算按照GJB/Z 35-1993附录C;4)电阻器的降额设计针对环境温度、功率和电压,其降额因子的选取按照GJB/Z 35-19935.6条;5)电容器的降额设计针对环境温度和工作电压,其降额因子的选取按照GJB/Z 35-19935.8条;6)连接器的降额设计针对工作电压、工作电流和环境温度,其降额因子的选取按照GJB/Z 35-19935.12...

468项新国标发布!色谱、质谱、光谱需求狂飙(上)

 5部分:回转冲击式钻孔工具2024-06-01219GB/T 32800.6-2023手持式电类动力工具  安全要求  6部分螺纹紧固件装配动力工具2024-06-01220GB/T 32800.8-2023手持式电类动力工具  安全要求  8部分:磨光机和抛光机2024-06-01221GB/T 32800.9-2023手持式电类动力工具  安全要求  9部分:模具砂轮机2024...

质检总局2016抽检可见分光光度计产品 合格率100%

结合产品区域分布特点,对童车、有源音箱、移动电话锂离子电池、防火门、钾肥、微耕机、植物保护机械、汽车安全带、滚动轴承、家用和类似用途插头插座、家用和类似用途剩余电流动作断路器、塑料外壳式断路器、手持式电动工具等产品集中产区的生产企业进行了重点抽查。  (六)抽查发现的主要质量问题。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号