IEC 60974-6-2010
弧焊设备.第6部分:限制负载设备

Arc welding equipment.Part 6: Limited duty equipment

IEC 60974-6-2010 发布历史

This part of IEC 60974 specifies safety and performance requirements applicable to limited duty arc welding and cutting power sources, and auxiliaries designed for use by laymen. Electrically powered equipment is intended to be connected to the single phase public lowvoltage supply system. Engine driven power sources can not exceed output power of 7,5 kVA. NOTE 1 This equipment is typically used by non-professionals in residential areas. This part of IEC 60974 is not applicable to arc welding and cutting power sources that require for operation: · arc striking and stabilizing devices; · liquid cooling systems; · gas consoles; · three-phase input supply; and which are intended for industrial and professional use only. This part of IEC 60974 is not applicable to arc welding and cutting power sources and ancillary equipment used in: · mechanically guided applications; · submerged arc welding process; · plasma gouging process; · plasma welding process; that are covered by other parts of IEC 60974. NOTE 2 Power sources, wire feeders, torches and electrode holders designed for industrial and professional use are respectively covered by IEC 60974-1, IEC 60974-5, IEC 60974-7 and IEC 60974-11. NOTE 3 This part of IEC 60974 does not specify electromagnetic compatibility (EMC) requirements that are given in IEC 60974-10.

IEC 60974-6-2010由国际电工委员会 IX-IEC 发布于 2010-11，并于 2010-11 实施。

IEC 60974-6-2010 在中国标准分类中归属于: J64 焊接与切割设备，在国际标准分类中归属于: 25.160.30 焊接设备。

IEC 60974-6-2010的历代版本如下：

• 2003年01月 IEC 60974-6-2003 弧焊设备.第6部分:限制负载的手工金属弧焊电源
• 2010年11月 IEC 60974-6-2010 弧焊设备.第6部分:限制负载设备
•  IEC 60974-6-2015 IEC 60974-6-2015

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEC 60974-6-2010 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEC 60974-6-2010

发布日期

2010年11月

实施日期

2010年11月

废止日期

无

中国标准分类号

J64

国际标准分类号

25.160.30

发布单位

IX-IEC

代替标准

IEC 60974-6-2015

适用范围

This part of IEC 60974 specifies safety and performance requirements applicable to limited duty arc welding and cutting power sources, and auxiliaries designed for use by laymen. Electrically powered equipment is intended to be connected to the single phase public lowvoltage supply system. Engine driven power sources can not exceed output power of 7,5 kVA. NOTE 1 This equipment is typically used by non-professionals in residential areas. This part of IEC 60974 is not applicable to arc welding and cutting power sources that require for operation: · arc striking and stabilizing devices; · liquid cooling systems; · gas consoles; · three-phase input supply; and which are intended for industrial and professional use only. This part of IEC 60974 is not applicable to arc welding and cutting power sources and ancillary equipment used in: · mechanically guided applications; · submerged arc welding process; · plasma gouging process; · plasma welding process; that are covered by other parts of IEC 60974. NOTE 2 Power sources, wire feeders, torches and electrode holders designed for industrial and professional use are respectively covered by IEC 60974-1, IEC 60974-5, IEC 60974-7 and IEC 60974-11. NOTE 3 This part of IEC 60974 does not specify electromagnetic compatibility (EMC) requirements that are given in IEC 60974-10.

IEC 60974-6-2010系列标准

IEC 60974-6-2010 中可能用到的仪器设备

谁引用了IEC 60974-6-2010 更多引用