DIN EN 14276-1-2011
制冷系统和热泵用压力设备.第1部分:压力容器.一般要求;德文版本EN 14276-1-2006+A1-2011

Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements; German version EN 14276-1:2006+A1:2011

DIN EN 14276-1-2011 发布历史

This European Standard specifies the requirements for material,design,manufacturing,testing and documentation for stationary pressure vesseis intended for use in refrigerating systems and heat pumps.These systems are referenced in this standard as refrigerating systems as defined in EN 378-1. This european standard applies to vessels including welded or brazed attachments up to and including the nozzle flanges, screwed, welded or brazed connectors or to the edge to be welded or brazed at the first circumferential joint connecting piping or other elements. This european standard applies to pressure vessels with an internal pressure down to-1 bar, to account for the evacuation of the vessel prior to charging with refrigerant. This european standard applies to both the mechanical loading conditions and thermal conditions as defined inen 13445-3 associated with refrigerating systems. it applies to pressure vessels subject to the maximum allowable temperatures for which nominal design stresses for materials are derived using en 13445-2 and en 13445-3 or as specified in this standard. in addition vessels designed to this standard should have a maximum design temperature not exceeding 200℃ and a maximum design pressure not exceeding 64 bars. outside of these limits, it is important that en 13445 be used for the design, construction and inspection of the vessel. under these circumstances it is important that the unique nature of refrigerating plant, as indicated in the introduction to this standard,also be taken into account. It is important that pressure vessels used in refrigerating systems and heat pumps of category less than ii as defined in annex h comply with other relevant clauses of en 378-2 for vessels. This european standard applies to pressure vessels where the main pressure bearing parts are manufactured from metallic ductile materials as defined in clause 4 and Annex I of this standard. This european standard does not apply to vessels of the following types: vessels of riveted construction; multilayered, autofrettaged or prestressed vessels; vessels directly heated by a flame; 《roll bond》heat exchangers.

DIN EN 14276-1-2011由德国标准化学会 DE-DIN 发布于 2011-05。

DIN EN 14276-1-2011 在中国标准分类中归属于: J75 换热设备，在国际标准分类中归属于: 23.020.30 压力容器、气瓶,27.080 热泵,27.200 制冷技术。

DIN EN 14276-1-2011的历代版本如下：

• 2011年05月 DIN EN 14276-1-2011 制冷系统和热泵用压力设备.第1部分:压力容器.一般要求;德文版本EN 14276-1-2006+A1-2011
• 2020年11月 DIN EN 14276-1-2020 制冷系统和热泵用压力设备. 第1部分: 压力容器. 一般要求; 德文版本EN 14276-1-2020

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 14276-1-2011 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 14276-1-2011

发布日期

2011年05月

实施日期

废止日期

无

中国标准分类号

J75

国际标准分类号

23.020.30;27.080;27.200

发布单位

DE-DIN

适用范围

This European Standard specifies the requirements for material,design,manufacturing,testing and documentation for stationary pressure vesseis intended for use in refrigerating systems and heat pumps.These systems are referenced in this standard as refrigerating systems as defined in EN 378-1. This european standard applies to vessels including welded or brazed attachments up to and including the nozzle flanges, screwed, welded or brazed connectors or to the edge to be welded or brazed at the first circumferential joint connecting piping or other elements. This european standard applies to pressure vessels with an internal pressure down to-1 bar, to account for the evacuation of the vessel prior to charging with refrigerant. This european standard applies to both the mechanical loading conditions and thermal conditions as defined inen 13445-3 associated with refrigerating systems. it applies to pressure vessels subject to the maximum allowable temperatures for which nominal design stresses for materials are derived using en 13445-2 and en 13445-3 or as specified in this standard. in addition vessels designed to this standard should have a maximum design temperature not exceeding 200℃ and a maximum design pressure not exceeding 64 bars. outside of these limits, it is important that en 13445 be used for the design, construction and inspection of the vessel. under these circumstances it is important that the unique nature of refrigerating plant, as indicated in the introduction to this standard,also be taken into account. It is important that pressure vessels used in refrigerating systems and heat pumps of category less than ii as defined in annex h comply with other relevant clauses of en 378-2 for vessels. This european standard applies to pressure vessels where the main pressure bearing parts are manufactured from metallic ductile materials as defined in clause 4 and Annex I of this standard. This european standard does not apply to vessels of the following types: vessels of riveted construction; multilayered, autofrettaged or prestressed vessels; vessels directly heated by a flame; 《roll bond》heat exchangers.

DIN EN 14276-1-2011系列标准

DIN EN 14276-1-2011 中可能用到的仪器设备

谁引用了DIN EN 14276-1-2011 更多引用