VDI 3823 Blatt 4-2006 发布历史

In this guideline the methods of testing vacuum coated plastic parts that have become established practice for manufacturers and users will be presented. As a rule, one must always verify whether the selected procedure really addresses the characteristics that will be relevant under the actual conditions of use and whether they can be tested in a reproducible manner. The testing of decorative, anti-friction, antiabrasion, electrical, optical and other functional coatings will be presented in detail. A differentiation will be made between testing for the approval of an entire series and the routine testing conducted during serial production. The many testing and examination procedures used for research and development purposes will not be considered, since these, often highly complex procedures, are only seldom used in everyday coating practice. They are, however, of great importance in making assessments in the event of damage and for discovering the causes of defects.

VDI 3823 Blatt 4-2006由德国机械工程师协会 DE-VDI 发布于 2006-11。

VDI 3823 Blatt 4-2006 发布之时，引用了标准

DIN 5033-1-1979 色度测定.第1部分:基本概念
DIN 5033-4-1992 比色法.分光光度法
DIN 5033-5-1981 第5部分:用目测比色法的色度测定
DIN 5033-6-1976 色度测定.第6部分:三色法
DIN 10050-9-1973 奶油包装材料的检验.透明性的测定
DIN 50021-1988 使用各种氯化钠溶液的喷雾检验
DIN 50431-1988 半导体材料的试验.用探针直线排列的四探针/直流法测量单晶硅或锗单晶体的电阻率
DIN 50933-1987 涂层厚度测量.使用触针仪器以差动测量法测量涂层厚度
DIN 52347-1987 玻璃和塑料的试验.磨损试验. 用砂轮试验法和散光测量
DIN 52348-1985 玻璃和塑料的试验.磨损试验.滴沙试验
DIN 53122-1-2001 塑料和弹性薄膜、纸、纸板和其它板材试验.水蒸气渗透性测定.第1部分:重力测定法
DIN 53380-1-2000 塑料制品试验.气体传输率的测定.第1部分:塑料薄模试验用容积测量法
DIN 53380-3-1998 测定塑料的气体传输率.第1部分:测定塑料薄膜和塑料模压品载氧率测量法
DIN 53494-1984 电镀层.电镀塑料件的检验.剥离强度的测定
DIN 53754-1977 塑料的试验.用砂轮法测定磨损

VDI 3823 Blatt 4-2006的历代版本如下：

2004年12月01日 VDI 3823 Blatt 4-2004 Qualitaetssicherung bei der Vakuumbeschichtung von Kunststoffen - Pruefungen an vakuumbeschichteten Kunststoffteilen
2006年11月 VDI 3823 Blatt 4-2006

非常抱歉，我们暂时无法提供预览，您可以试试：免费下载 VDI 3823 Blatt 4-2006 前三页，或者稍后再访问。

注意：点击下载后，生成下载文件时间比较长，请耐心等待......

标准号: VDI 3823 Blatt 4-2006
发布日期: 2006年11月
实施日期
废止日期: 无
国际标准分类号: 25.220.01
发布单位: DE-VDI

适用范围: In this guideline the methods of testing vacuum coated plastic parts that have become established practice for manufacturers and users will be presented. As a rule, one must always verify whether the selected procedure really addresses the characteristics that will be relevant under the actual conditions of use and whether they can be tested in a reproducible manner. The testing of decorative, anti-friction, antiabrasion, electrical, optical and other functional coatings will be presented in detail. A differentiation will be made between testing for the approval of an entire series and the routine testing conducted during serial production. The many testing and examination procedures used for research and development purposes will not be considered, since these, often highly complex procedures, are only seldom used in everyday coating practice. They are, however, of great importance in making assessments in the event of damage and for discovering the causes of defects.

VDI 3823 Blatt 4-2006

Vacuum coating quality assurance - Testing of vacuum coated plastics