VDI 3940 Blatt 2-2006 发布历史

The present guideline is a set of instructions for the measurement of odour impact in an area affected by an odorant plume. The odour load is determined here with qualified assessors who assess the ambient air for odours at previously defined positions within certain measurement cycles. Plume measurements are used for gathering information on odour impact within an odorant plume. The investigation takes place in specific (measured) meteorological conditions. Like for grid field inspections, the percentage time with odour detection (percentage odour time) during a single measurement is used as the measured variable for odour impact. The main field of application of plume measurement is for the reverse calculation of emission source strengths by using suitable dispersion models. Furthermore, it can also be used in the calibration and validation of dispersion models, for the determination of plume extent and in the pinpointing of causers of emissions.

VDI 3940 Blatt 2-2006由德国机械工程师协会 DE-VDI 发布于 2006-02。

VDI 3940 Blatt 2-2006在国际标准分类中归属于: 13.040.20 环境空气。

VDI 3940 Blatt 2-2006 发布之时，引用了标准

DIN 10954-1997 感官检测方法.比对试验
DIN 10961-1996 感官检验员培训
DIN 10962-1997 感官检验区.检验室规范
DIN 10963-1997 感官检验方法.评级方法
DIN 10964-1996 感官检验方法.简单描述性检验
DIN 10966-1997 感官试验法.强度试验
DIN EN 13725-2003 空气质量.用动态气味测定法测定气味浓度
VDI 2449 Blatt 2-1987 Grundlagen zur Kennzeichnung vollstaendiger Messverfahren; Begriffsbestimmungen
VDI 3782 Blatt 1-2001 Environmental meteorology - Atmospheric dispersion models - Gaussain plume model for air quality management
VDI 3786 Blatt 1-1995
VDI 3786 Blatt 2-2000
VDI 3786 Blatt 3-1985

VDI 3940 Blatt 2-2006的历代版本如下：

2003年11月01日 VDI 3940 Blatt 2-2003 Bestimmung der Geruchsstoffimmission durch Begehungen - Bestimmung der Immissionshaeufigkeit von erkennbaren Geruechen - Fahnenmessung
2006年02月 VDI 3940 Blatt 2-2006

VDI 3940 Blatt 2-2006 由 VDI 3940-1993 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试：免费下载 VDI 3940 Blatt 2-2006 前三页，或者稍后再访问。

注意：点击下载后，生成下载文件时间比较长，请耐心等待......

标准号: VDI 3940 Blatt 2-2006
发布日期: 2006年02月
实施日期
废止日期: 无
国际标准分类号: 13.040.20
发布单位: DE-VDI

适用范围: The present guideline is a set of instructions for the measurement of odour impact in an area affected by an odorant plume. The odour load is determined here with qualified assessors who assess the ambient air for odours at previously defined positions within certain measurement cycles. Plume measurements are used for gathering information on odour impact within an odorant plume. The investigation takes place in specific (measured) meteorological conditions. Like for grid field inspections, the percentage time with odour detection (percentage odour time) during a single measurement is used as the measured variable for odour impact. The main field of application of plume measurement is for the reverse calculation of emission source strengths by using suitable dispersion models. Furthermore, it can also be used in the calibration and validation of dispersion models, for the determination of plume extent and in the pinpointing of causers of emissions.

VDI 3940 Blatt 2-2006

Measurement of odour impact by field inspection - Measurement of the impact frequency of recognizable odours - Plume measurement