ISO 22389-2:2012
木结构.工字梁的弯曲应用.第2部分:组件性能和加工要求

Timber structures - Bending applications of I-beams - Part 2: Component performance and manufacturing requirements


ISO 22389-2:2012 发布历史

ISO 22389-2:2012由国际标准化组织 IX-ISO 发布于 2012-01。

ISO 22389-2:2012 在中国标准分类中归属于: P23 木结构工程,在国际标准分类中归属于: 91.080.20 木结构。

ISO 22389-2:2012 发布之时,引用了标准

  • EN 789 木结构的试验方法.木基板材机械特性的测定*2023-10-27 更新
  • ISO 20152-1 木结构.粘合剂粘合性能.第1部分:基本要求
  • ISO 22389-1:2010 木结构.I形梁弯曲强度.第1部分:试验、评价和特征描述

* 在 ISO 22389-2:2012 发布之后有更新,请注意新发布标准的变化。

ISO 22389-2:2012的历代版本如下:

  • 2020年 ISO 22389-2:2020 木结构 - I型梁的弯曲应用 - 第2部分:组件性能和制造要求
  • 2012年 ISO 22389-2:2012 木结构.工字梁的弯曲应用.第2部分:组件性能和加工要求

 

This part of ISO 22389 specifies the component performance and manufacturing requirements for prefabricated wood-based I-beams used as structural members in bending applications. It does not cover fire performance, formaldehyde requirements and biological durability. This part of ISO 22389 gives requirements for manufacturing, in-house quality assurance and periodic reevaluation of prefabricated wood-based I-beams. Wood-based I-beams tested according to this part of ISO 22389 are intended for use in covered conditions and utilize components that are able to resist the effects of moisture on structural performance due to construction delays or other conditions of similar severity, but not permanently exposed to the weather. NOTE The service conditions are similar to “Service class 2” as defined in ISO 20152-1. Testing, evaluation, and performance characterization requirements for prefabricated wood-based I-beams are covered in ISO 22389-1. This part of ISO 22389 does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this part of ISO 22389 to establish appropriate health and safety practices and determine the applicability of regulatory limitations prior to use.

ISO 22389-2:2012

标准号
ISO 22389-2:2012
发布
2012年
发布单位
国际标准化组织
替代标准
ISO 22389-2:2020
当前最新
ISO 22389-2:2020
 
 
引用标准
EN 789 ISO 20152-1 ISO 22389-1:2010

ISO 22389-2:2012相似标准


推荐

日本房屋为何抗震好?十大抗震材料大解析

这种材料建筑既安全抗震,又节省能源。橡胶图片来源于公开资料橡胶也是一种良好抗震材料。建筑物中央部分使用积层橡胶,当裂度为6地震发生时,建筑物受力可减少至1/2。橡胶既能保护木材不受潮,也能在地震中起到缓冲作用。钢木复合(轻型H钢 +集成木材)图片来源于nissin-h.com钢木复合,交叉连接,以及与独立柱子之间连接,所使用钢制镀锌销拴,抗震效果非常好。...

【钢铁】什么是H型钢?

2、设计风格灵活、丰富:在高相同情况下,钢结构开间可比混凝土结构开间大50% ,从而使建筑布置更加灵活。3、结构自重轻:与混凝土结构自重相比轻,结构自重降低,减少了结构设计内力,可使建筑结构基础处理要求低,施工简便,造价降低。...

打造零碳住宅那些建筑外围护技术分享!

从2012年开始,建筑规范对热性能有了更高要求,现在大多数地区都要求用某种形式连续隔热来打破热桥。因此,性能有所提高,但仍有大量木材构成框架问题,因此所述毛层隔热R值不能反映整面墙组件性能。把所有的墙钉加起来,如果没有隔热层,你墙有很大一部分是实木,R值约为6(每英寸R1)。除此之外,除非在安装保温垫时非常小心,否则很容易出现小间隙。...

厉害了!8个典型数据采集系统架构,都教给你了

Point● 支持数值监视器、最大/最小值监视● 根据您应用选择合适图形显示(Y-T、X-Y、条形图)● 高速测量模式下0.1秒采样间隔● 能够处理准动态现象产品示例荷载传感器应变片压缩计压缩计(破坏型)木材试验系统应用场景·六系统适用于近年来备受关注木结构建筑研发中荷载试验。可实时显示多个通道直观条形图,结合扩展箱,可实现最多1,000个通道最快 0.1秒采样测量。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号