SAE AMS3642E-2012
耐热的玻璃织物增强的热固树脂叠层塑料模制品
Plastic Moldings, Laminated, Thermosetting Resin, Glass Cloth Reinforced, Heat Resistant
购买全文，请联系:
- 标准号
- SAE AMS3642E-2012
- 发布
- 2012年
- 发布单位
- 美国机动车工程师协会
- 当前最新
- SAE AMS3642E-2012
- 引用标准
- ASTM D149-09 ASTM D150-11 ASTM D256-10 ASTM D570-98 ASTM D635-10 ASTM D638-10 ASTM D638M-96 ASTM D695-10 ASTM D695M-91 ASTM D790-10 ASTM D790M-93 ASTM D792-08 MIL-STD-2073-1
- 适用范围
- This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers one type of glass-cloth-reinforced thermosetting resin in the form of laminated, pressure-bag or matched-die moldings. These moldings have been used typically for parts requiring thermal stability consistent with good mechanical properties when exposed to temperatures up to 260 degrees C (500 degrees F) continuously or up to 315 degrees C (599 degrees F) intermittently, but usage is not limited to such applications.
SAE AMS3642E-2012相似标准
推荐
复合材料成型工艺大全及说明
其成型过程是用手工铺叠方式，将增强材料和树脂（含预浸材料）按设计方向和顺序逐层铺放到模具上，达到规定厚度后，经加压、加热、固化、脱模、修整而获得制品。四种方法与手糊成型工艺的区别仅在于加压固化这道工序。因此，它们只是手糊成型工艺的改进，是为了提高制品的密实度和层间粘接强度。 ...
常用非金属材料
复合材料具有高的比强度、比模量(弹性模量与密度之比)和疲劳强度性能好，断裂安全性高，抗冲击性差，横向强度较低。(二)常用复合材料1.树脂基复合材料树脂基复合材料是将树脂浸到纤维和纤维织物上固化而制成。在成型模具上涂树脂、铺织物，然后固化而成。(1)玻璃纤维增强塑料 又称为玻璃钢，基体相为树脂，分散相为玻璃纤维。根据树脂的性质可分为热固性玻璃钢和热塑性玻璃钢。...