DIN EN 12814-3:2005
热塑性半成品的焊接接头试验.第3部分:拉伸蠕变试验
Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test (including amendment A1:2005); English version of DIN EN 12814-3:2000 + A1:2005
- 标准号
- DIN EN 12814-3:2005
- 发布
- 2005年
- 发布单位
- 德国标准化学会
- 替代标准
- DIN EN 12814-3:2014
- 当前最新
- DIN EN 12814-3:2014
- 适用范围
- This standard specifies the dimensions, the method of sampling and the preparation of the test specimens, and the conditions for performing the tensile creep test perpendicular to the weld in order to determine the long term tensile welding factor. A tensile creep test may be used in conjunction with other tests (e.g. bend test, tensile test, macrographic examination...) to assess the performance of welded assemblies, made from thermoplastics materials. The test is applicable to welded assemblies made from thermoplastics materials filled or unfilled such as tubes and fittings, sheets, plates and profiles, but not reinforced, irrespective of the welding process used.
DIN EN 12814-3:2005相似标准
推荐
塑料拉伸强度检测
部分标准：GBT 1040.3-2006 塑料拉伸性能的测试DIN EN ISO 8256-2005 塑料 冲击拉伸强度测定ISO 18872-2007 塑料.测定高应变率拉伸特性DIN EN ISO 8256-1997塑料.冲击拉伸强度测定ISO 16790-2005 塑料.热塑性塑料熔融状态下的拉伸特性测定GBT 528-1992硫化橡胶和热塑料橡胶拉伸性能的测定拉伸试验是对试样延期纵轴方向施加静态拉伸负荷...
塑料蠕变应力松驰试验机
二．适用的试验方法标准GB11546.1－2008塑料 蠕变性能的测定 第1部分：拉伸蠕变GB/T 15048－94硬质泡沫塑料压缩蠕变试验方法 GB/T 20672－2006硬质泡沫塑料在规定负荷和温度条件下压缩蠕变的测定GB/T1685-2008 硫化橡胶或热塑性橡胶 在常温和高温下压缩应力松弛的测定 GB/T 1040.1-2006塑料拉伸性能的测定第1部分 GB/T1041-92塑料压缩性能试验方法...