IEC 61241-11-2005
有可燃性粉尘场合用电气设备.第11部分:本征安全"iD"型保护设备

Electrical apparatus for use in the presence of combustible dust - Part 11: Protection by intrinsic safety 'iD'


IEC 61241-11-2005



标准号
IEC 61241-11-2005
发布日期
2005年10月
实施日期
废止日期
中国标准分类号
K35
国际标准分类号
29.260.20
发布单位
IX-IEC
代替标准
IEC 60079-11-2011
适用范围
This part of IEC 61241 specifies requirements for the construction and testing of intrinsically safe apparatus intended for use in potentially explosive dust cloud or dust layer environments and for associated apparatus that is intended for connection to intrinsically safe circuits which enter such environments. This standard supplements the general requirements of IEC 61241-0: except as indicated in the following list. Apparatus utilized in systems will meet the requirements of IEC 60079-25. If associated apparatus is protected by a type of protection listed in IEC 61241-0 or IEC 60079-0 then the requirements of that method of protection together with the relevant parts of IEC 61241 or IEC 60079 also apply to the associated apparatus. The list of exclusions which follows is directly applicable to associated apparatus intended for use in situations where there is no potentially hazardous atmosphere and in other circumstances should be used in combination with the requirements of the other methods of protection. Clause or subclause of IEC 61241-0 Clause excluded for Intrinsically safe apparatus 4.1 General No 4.2 Opening enclosures Yes 4.3 Environmental conditions No 5.1 Maximum surface temperature No 5.2 Maximum surface temperature with respect to dust layers above 50 mm No 6.1.1 Material specification No 6.1.2 Plastic materials No 6.1.3 Verification of compliance No 6.1.4 Thermal endurance No 6.1.5 Electrostatic charges No 6.2.1 Alloys No 6.2.2 Threaded holes Yes 7 Fasteners Yes 8 Interlocking devices Yes 9 Bushings Yes 10 Materials used for cementing No 12 Connection facilities and terminal compartments Yes 13 Connection facilities for earthing or bonding conductors Yes 14 Cable and conduit entries No 15 to 20 Supplementary requirements for certain electrical apparatus No

IEC 61241-11-2005系列标准

IEC 61241-0 CORR 1-2005 有可燃性粉尘场所用电气设备.第0部分:一般要求.勘误1 IEC 61241-0-2004 有可燃性粉尘场合用电气设备.第0部分:一般要求 IEC 61241-1-1-1999 有可燃性粉尘场合用电气设备 第1-1部分:外壳防护的电气设备和表面的温度限制 设备规范 IEC 61241-1-2-1999 有可燃性粉尘场合用电气设备 第1-2部分:外壳防护的电气设备和表面的温度限制 设备选择、安装和维护 IEC 61241-1-2004 有可燃性粉尘场合用电气设备.第1部分:"tD"型外壳防护 IEC 61241-10-2004 有可燃性粉尘场合用电气设备.第10部分:有或可能有可燃性粉尘区域的分类 IEC 61241-11 CORR 1-2006 有可燃性粉尘场所用电气设备.第11部分:本征安全"iD"型防护设备.勘误1 IEC 61241-14-2004 有可燃性粉尘场合用电气设备.第14部分:选择和安装 IEC 61241-17-2005 可燃性粉尘环境中用电气装置.第17部分:危险环境中(矿除外)电气装置的检验和维护 IEC 61241-18-2004 有可燃性粉尘场合用电气设备.第18部分:封装'mD'型防护设备 IEC 61241-2-1-1994 有可燃性粉尘场合用电气设备 第2部分:试验方法 第1节:粉尘最低引燃温度的测定方法 IEC 61241-2-3-1994 有可燃性粉尘场合用电气设备 第2部分:试验方法 第3节:粉尘/空气混合物的最小引燃能量的测定方法 IEC 61241-3-1997 有可燃性粉尘场合用电气设备 第3部分:有或可能有可燃性粉尘区域的分类 IEC 61241-4-2001 有可燃性粉尘场所用电气设备 第4部分:防护类型“pD”

IEC 61241-11-2005 中可能用到的仪器设备


谁引用了IEC 61241-11-2005 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号