DS/IEC/TR 61464+Corr.1:2003
绝缘套管 套管中溶解气体分析(DGA)的解释指南,其中油是主要绝缘的浸渍介质(通常为纸)

Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the main insulation (generally paper)


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 DS/IEC/TR 61464+Corr.1:2003 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
DS/IEC/TR 61464+Corr.1:2003
发布
2003年
发布单位
丹麦标准化协会
当前最新
DS/IEC/TR 61464+Corr.1:2003
 
 
适用范围
This technical report gives guidance for the interpretation of dissolved gas analysis (DGA) which has been developed for bushings, in service, where the main insulation (generally paper) is impregnated with mineral insulating oil according to IEC 60296. This technical report is applicable to oil-filled and impregnated paper bushings in service. Until further experience has been gained, the methods should be applied with caution in relation to other materials, e.g. synthetic hydrocarbons based on dodecylbenzene, according to IEC 60867. The indication obtained by the interpretation of a dissolved gas analysis of an oil sample taken out of a bushing should be

DS/IEC/TR 61464+Corr.1:2003相似标准


推荐

电气设备内部故障与油特征气体关系

我国现行《变压器油溶解气体分析和判断导则》(DL/T22-2000),将不同故障类型产生主要特征气体和次要特征气体归纳表1-2。同时,通过对充油变压器在运行中发生大量事故诊断和吊心检验,在表1-3和表1-4列出了电力变压器及其高压引线套管典型故障与故障类型关系。...

电力变压器内部有些什么?

这些分类基于实际原因,这将在以下三个广泛领域讨论变得明显。  套管可根据以下内容分类:  1、端部绝缘介质  2、结构  3、套管绝缘  电容式套管分为整体式和电容式两种。  根据套管绝缘情况,可分为空气绝缘套管、油绝缘套管或充油套管、油浸绝缘套管、树脂粘合或浸渍绝缘套管、铸造绝缘套管气体绝缘套管。  油箱  变压器这一部分包括铁心和浸在绝缘绕组总成。...

还不了解云母管看过来!

熟悉它的人肯定知道,云母管几个特点中,主要就是耐高温和绝缘这两个,它主要用途就体现在这两点上。一旦有极点情况发生,电热丝会先把云母层烧出一个大洞,并且会加热,直至电热丝彻底熔断。如果没有我们这款产品的话,就会点燃木地板、地毯等易燃物,从而造成火灾,危及到人身安全。   常以油或气体绝缘介质,一般制成变压器套管或断路器套管,常用于35千伏以下电压等级。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号