SAE J493-2013
杆端和U形夹销

Rod Ends and Clevis Pins

SAE J493-2013 发布历史

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. Material--SAE 1010 or SAE 1111 steel or equivalent. Clevis pins shall be supplied either soft or cyanide hardened as specified. Clevis pins must be free from burrs, loose scale, sharp edges, and all other defects that might affect their serviceability. General tolerances for all dimensions are plus or minus 0.010 unless otherwise specified.

SAE J493-2013由美国机动车工程师协会 US-SAE 发布于 2013-02-25。

SAE J493-2013 在中国标准分类中归属于: T06 工艺与工装，在国际标准分类中归属于: 21.080 铰链、孔眼和其他关节连接件。

SAE J493-2013的历代版本如下：

• 1961年06月01日 SAE J493-1961 杆端和U形夹销
• 2013年02月25日 SAE J493-2013 杆端和U形夹销

标准号

SAE J493-2013

发布日期

2013年02月25日

实施日期

废止日期

无

中国标准分类号

T06

国际标准分类号

21.080

发布单位

美国机动车工程师协会

引用标准

SAE J 1010-1983 SAE J 1111-2007

被代替标准

SAE J 493-1961

适用范围

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. Material--SAE 1010 or SAE 1111 steel or equivalent. Clevis pins shall be supplied either soft or cyanide hardened as specified. Clevis pins must be free from burrs, loose scale, sharp edges, and all other defects that might affect their serviceability. General tolerances for all dimensions are plus or minus 0.010 unless otherwise specified.