BS 5410-2-2013
烧油实施规程.第2部分:输出功率大于等于45 kW的空间加热、热水和蒸汽供应设备
Code of practice for oil firing.Part 2:Installations over 45 kW output capacity for space heating, hot water and steam supply services
BS 5410-2-2013 发布历史
This part of BS 5410 gives recommendations and guidance on the design, installation,commissioning and maintenance of oil burning installations for heating,hot water and steam supply services having a total rated output of over 45 kW and/or an oil storage capacity above 3 500 L. This part of BS 5410 is applicable to installations burning liquid fuel conforming to BS 2869:2010+A1,including biofuels, for example those containing fatty acid methyl esters (FAME) conforming to BS EN 14214, and blends thereof. The standard covers the provision of new installations and also gives guidance on the modernizing of existing installations. The standard also gives recommendations and guidance on the selection and installation of oil tanks associated with these installations. This part of BS 5410 is applicable to the oil burning equipment forming part of a multi-fuel installation in which oil is not burnt simultaneously with any other fuel. It is not applicable to oil fired systems for marine installations. The standard also gives recommendations on thermal fluid heaters and on portable plants, for example those used for emergency or temporary heat supply. The standard is intended for use by designers, specifiers,installers and building owners.
BS 5410-2-2013由英国标准学会 GB-BSI 发布于 2013-03-31，并于 2013-03-31 实施。
BS 5410-2-2013 在中国标准分类中归属于: J98 锅炉及其辅助设备，在国际标准分类中归属于: 27.060.10 液体和固体燃料燃烧器。
BS 5410-2-2013 发布之时，引用了标准
- BS 799-5 燃油设备.碳钢储油罐.规范
- BS 845-1 蒸汽、热水和高温传热流体用锅炉热性能的估算方法.第1部分:简明方法
- BS 845-2 蒸汽,热水和高温传热流体用锅炉热性能的估算方法.综合规程
- BS 1212-1 浮子阀.第1部分:活塞式浮子阀(铜合金阀体)(不含浮子)规范
- BS 1212-2 浮子阀.第2部分:隔膜式浮子阀(铜合金阀体)(不含浮子)规范
- BS 1212-3 浮子阀.第3部分:仅供冷水用隔膜型塑料体浮子操作阀(不包括浮子)规格
- BS 1710 管路和使用维护标志规范*， 2014-12-31 更新
- BS 2869-2010+A1-2011 农用,家用和工业用发动机和锅炉用燃油.规范
- BS 5306 *， 2015-03-31 更新
- BS 5410-1 燃油规范.第1部分:输出功率小于等于45KW的环流供暖及热水供应锅炉装置*， 2014-12-31 更新
- BS 5970 温度范围从- 100℃至+ 870℃的管道工程及设备隔热.实施规程
- BS 7430 电气装置的保护接地实施规程
- BS 7671 电气装置的要求. IET布线规则. 第十七版*， 2013-08-01 更新
- BS 9999 建筑设计、管理和使用中的消防安全.实施规则*， 2017-01-31 更新
- BS EN 267
- BS EN 303-1 供暖锅炉.带强制通风燃烧器的供暖锅炉.术语、一般要求、试验和标记*， 2017-09-21 更新
- BS EN 303-2 采暖锅炉.强制通风式燃烧器的采暖锅炉.第2部分:雾化油燃烧器锅炉的详细要求
- BS EN 303-4 供暖锅炉.带强制通风燃烧器的供暖锅炉.最大操作压力3巴、最高输出达70kW的带强制通风燃油器的锅炉的特殊要求.术语、特殊要求、试验和标记
- BS EN 1254-2-1998 铜和铜合金.管路接头.与铜管一起使用的压合接头
- BS EN 1567
- BS EN 1228 塑料管道系统.玻璃纤维的增强热固塑料(GRP)管.特定初始环状刚性测定
* 在 BS 5410-2-2013 发布之后有更新，请注意新发布标准的变化。
BS 5410-2-2013的历代版本如下：
- 1978年08月31日 BS 5410-2-1978 烧油惯例.第2部分:输出功率大于等于45kW的空间加热、热水和蒸汽供应设备
- 2013年03月31日 BS 5410-2-2013 烧油实施规程.第2部分:输出功率大于等于45 kW的空间加热、热水和蒸汽供应设备
- 标准号
- BS 5410-2-2013
- 发布日期
- 2013年03月31日
- 实施日期
- 2013年03月31日
- 废止日期
- 无
- 中国标准分类号
- J98
- 国际标准分类号
- 27.060.10
- 发布单位
- GB-BSI
- 引用标准
- BS 476-21 BS 476-22 BS 799-4-1991 BS 799-5 BS 845-1 BS 845-2 BS 1212-1 BS 1212-2 BS 1212-3 BS 1710 BS 2869-2010+A1-2011 BS 5306 BS 5410-1 BS 5970 BS 7430 BS 7671 BS 9999 BS EN 267 BS EN 303-1 BS EN 303-2 BS EN 303-4 BS EN 1254-2-1998 BS EN 1567 BS EN 1228
- 被代替标准
- BS 5410-2-1978
- 适用范围
- This part of BS 5410 gives recommendations and guidance on the design, installation,commissioning and maintenance of oil burning installations for heating,hot water and steam supply services having a total rated output of over 45 kW and/or an oil storage capacity above 3 500 L. This part of BS 5410 is applicable to installations burning liquid fuel conforming to BS 2869:2010+A1,including biofuels, for example those containing fatty acid methyl esters (FAME) conforming to BS EN 14214, and blends thereof. The standard covers the provision of new installations and also gives guidance on the modernizing of existing installations. The standard also gives recommendations and guidance on the selection and installation of oil tanks associated with these installations. This part of BS 5410 is applicable to the oil burning equipment forming part of a multi-fuel installation in which oil is not burnt simultaneously with any other fuel. It is not applicable to oil fired systems for marine installations. The standard also gives recommendations on thermal fluid heaters and on portable plants, for example those used for emergency or temporary heat supply. The standard is intended for use by designers, specifiers,installers and building owners.