CEN/TS 14541-2013 发布历史

This Technical Specification specifies definitions and recommended characteristics and test methods for the utilisation of PVC-U, PP and PE non-virgin materials in pipes, fittings and ancillaries for both pressure and non-pressure piping systems. This Technical Specification specifies the conditions for utilisation of non-virgin material with and without agreed specification. Non-virgin materials may be reformulated by the use of additives and processing techniques to meet an agreed specification. Typically the additives used would be stabilisers and pigments etc. The WG responsible for the product standard should consider the content of this document and only permit dosage levels which give compliance with the requirements of the product standard. Further, the WG should consider whether extra or more frequent product testing is relevant when using such material in the production of pipes and fittings in accordance with the relevant product standard. NOTE For the purpose of this specification the term pipes means extruded pipes, gutters and any parts of a fabricated fitting which is made from an extruded pipe. The term fitting means injection- and rotomoulded fittings and injection moulded parts of a fabricated fitting. For the recycling process, the testing and the use of the non-virgin material National and/or European regulations may apply.

CEN/TS 14541-2013由欧洲标准化委员会 IX-CEN 发布于 2013-05-01。

CEN/TS 14541-2013在国际标准分类中归属于: 83.140.30 塑料管、配件和阀门。

CEN/TS 14541-2013 发布之时，引用了标准

EN 10204-2004 金属材料.检验文件的类型*， 2022-07-27 更新
EN 12099-1997 塑料管道系统.聚乙烯管材和组件.挥发含量的测定
EN 15346-2007 塑料.再生塑料.聚氯乙烯(PVC)回收再生物的特性*， 2022-07-27 更新
EN ISO 306-2004
EN ISO 1133-1-2011 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定.第1部分:标准方法塑料.热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定.第1部分:标准方法*， 2022-07-27 更新
EN ISO 1183-2-2004 塑料.非泡沫塑料的密度测定方法.第2部分:密度梯度管法 ISO 1183-2-2004
EN ISO 3451-1-2008 塑料.灰烬的测定.第1部分:通用方法
EN ISO 3451-5-2002 塑料.灰份的测定.第5部分:聚氯乙烯 ISO 3451-5-2002
EN ISO 11357-6-2013
EN ISO 13229-2011 无压设施用热塑性塑料管道系统.未增塑聚氯乙烯(氯乙烯)(PVC-U)管道和配件的粘度值和增殖系数粘度值测定

* 在 CEN/TS 14541-2013 发布之后有更新，请注意新发布标准的变化。

CEN/TS 14541-2013的历代版本如下：

2007年02月01日 CEN/TS 14541-2007
2013年05月01日 CEN/TS 14541-2013

CEN/TS 14541-2013 塑料管道和配件.未增塑聚氯乙烯(PVC-U),聚丙烯(PP)和聚乙烯(PE)材料的应用特性由 CEN/TS 14541-2007 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试：免费下载 CEN/TS 14541-2013 前三页，或者稍后再访问。

注意：点击下载后，生成下载文件时间比较长，请耐心等待......

标准号: CEN/TS 14541-2013
发布日期: 2013年05月01日
实施日期
废止日期: 无
国际标准分类号: 83.140.30
发布单位: IX-CEN
引用标准: EN 10204-2004 EN 12099-1997 EN 15346-2007 EN ISO 306-2004 EN ISO 1133-1-2011 EN ISO 1183-2-2004 EN ISO 3451-1-2008 EN ISO 3451-5-2002 EN ISO 11357-6-2013 EN ISO 13229-2011
被代替标准: CEN/TS 14541-2007 FprCEN/TS 14541-2012

适用范围: This Technical Specification specifies definitions and recommended characteristics and test methods for the utilisation of PVC-U, PP and PE non-virgin materials in pipes, fittings and ancillaries for both pressure and non-pressure piping systems. This Technical Specification specifies the conditions for utilisation of non-virgin material with and without agreed specification. Non-virgin materials may be reformulated by the use of additives and processing techniques to meet an agreed specification. Typically the additives used would be stabilisers and pigments etc. The WG responsible for the product standard should consider the content of this document and only permit dosage levels which give compliance with the requirements of the product standard. Further, the WG should consider whether extra or more frequent product testing is relevant when using such material in the production of pipes and fittings in accordance with the relevant product standard. NOTE For the purpose of this specification the term pipes means extruded pipes, gutters and any parts of a fabricated fitting which is made from an extruded pipe. The term fitting means injection- and rotomoulded fittings and injection moulded parts of a fabricated fitting. For the recycling process, the testing and the use of the non-virgin material National and/or European regulations may apply.

CEN/TS 14541-2013

Plastics pipes and fittings - Characteristics for utilisation of nonvirgin PVC-U, PP and PE materials