SAE J 617-2014
发动机飞轮壳和配套变速箱壳法兰

Engine Flywheel Housing and Mating Transmission Housing Flanges

SAE J 617-2014 发布历史

This SAE Standard specifies the major dimensions and tolerances for Engine Flywheel Housings and the Mating Transmission Housing Flanges. It also locates the crankshaft flange face or the transmission pilot bore (or pilot bearing bore) stop face in relation to housing SAE flange face. This document is not intended to cover the design of the flywheel housing face mating with the engine crankcase rear face or the design of housing walls and ribs. Housing strength analysis and the selection of housing materials are also excluded. This document applies to any internal combustion engine which can utilize SAE No. 6 through SAE No. 00 size flywheel housing for mou

SAE J 617-2014由美国机动车工程师协会 US-SAE 发布于 2014-04-16。

SAE J 617-2014 在中国标准分类中归属于: T32 螺塞、管件。

SAE J 617-2014 发布之时，引用了标准

• ASME B1.1-1989 标准英制螺纹(UN和UNR螺纹牙型)
• ASME Y14.5-1966 
• ISO 7648-1987 往复式内燃机飞轮壳 基本尺寸和公差
• ISO 7649-1991 往复式内燃机离合器壳 标称尺寸和公差
• SAE J 542-1991 起动发动机装配
• SAE J 543-1995 启动马达小齿轮和环形齿轮
• SAE J 621-2012 带有驾驶环式平衡阀离合器的工业动力输出
• SAE J 1033-2012 飞轮,飞轮外壳和飞轮外壳连接物的钻孔和端面跳动测量规程
• SAE J 1172-2012 带密封法兰的发动机飞轮轴承箱

SAE J 617-2014的历代版本如下：

• 1992年05月01日 SAE J 617-1992 发动机飞轮壳和交配传输外壳法兰
• 2012年05月31日 SAE J 617-2012 发动机飞轮壳和配套变速箱壳法兰
• 2014年04月16日 SAE J 617-2014 发动机飞轮壳和配套变速箱壳法兰

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE J 617-2014 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE J 617-2014

发布日期

2014年04月16日

实施日期

废止日期

无

中国标准分类号

T32

国际标准分类号

43.060.10

发布单位

US-SAE

引用标准

ASME B1.1-1989 ASME Y14.5-1966 ISO 7648-1987 ISO 7649-1991 SAE J 542-1991 SAE J 543-1995 SAE J 615-2008 SAE J 616-2008 SAE J 621-2012 SAE J 1033-2012 SAE J 1172-2012

被代替标准

SAE J 617-2012

适用范围

This SAE Standard specifies the major dimensions and tolerances for Engine Flywheel Housings and the Mating Transmission Housing Flanges. It also locates the crankshaft flange face or the transmission pilot bore (or pilot bearing bore) stop face in relation to housing SAE flange face. This document is not intended to cover the design of the flywheel housing face mating with the engine crankcase rear face or the design of housing walls and ribs. Housing strength analysis and the selection of housing materials are also excluded. This document applies to any internal combustion engine which can utilize SAE No. 6 through SAE No. 00 size flywheel housing for mou