ISO 7176-8:2014由国际标准化组织 IX-ISO 发布于 2014-12。
ISO 7176-8:2014 在中国标准分类中归属于: Y14 自行车,在国际标准分类中归属于: 11.180.10 运动用设备及其配合性。
ISO 7176-8:2014 轮椅 第8部分:静态强度、冲击强度和疲劳强度的要求和试验方法的最新版本是哪一版?
最新版本是 ISO 7176-8:2014/Amd 1:2015 。
This part of ISO 7176 specifies requirements for static, impact, and fatigue strength of wheelchairs including scooters. It specifies the test methods for determining whether the requirements have been met. It also specifies requirements for disclosure of the test results. The test methods can also be used to verify the manufacturers’ claims that a product exceeds the minimum requirements of this part of ISO 7176. This International Standard applies to occupant- and attendant-propelled manual wheelchairs and electrically powered wheelchairs intended to provide indoor and outdoor mobility for people with disabilities. NOTE 1 For the purposes of this part of ISO 7176, “wheelchair(s)” is used as an abbreviation for manual wheelchair(s) or electrically powered wheelchair(s), including scooter(s), to which the requirements and test methods are applied. NOTE 2 Clauses of this part of ISO 7176 will be used as a basis for developing requirements and test methods for wheelchairs not covered by this part of ISO 7176.
硬度表示金属材料在局部范围内对塑性变形的抗力,所以硬度与强度间有一定的换算关系。 5、冲击韧性冲击韧性是金属材料抗击冲击负荷的能力。现在普通采用一次摆锤冲击试验来测定材料的冲击韧性。 实验表明,材料受小能量多次重复冲击的能力,主要取决于材料强度。强度越高,寿命越长,设计中可不必过分追求高冲击值。6、疲劳强度实际中许多工件所承受负荷的方向和大小是周期变化的。这种周期变化的负荷称为交变负荷。...
8、冲击砝码重量:(4±0.2)kg9、加载装置重量:(5±0.5)kg10、坠落高度:600mm±5mm11、模拟下颚装置:宽度87mm~90mm12、测试模式:静态和动态13,触摸屏控制7寸彩色;14,操作系统:PLC;15,操作界面:中英文切换16、工作电源:AC220V ,50Hz。...
残余应力一般是有害的,如零件在不适当的热处理、焊接或切削加工后,残余应力会引起零件发生翘曲或扭曲变形,甚至开裂,经淬火或磨削后表面会出现裂纹。残余应力的存在有时不会立即表现为缺陷。当零件在工作中因工作应力与残余应力的叠加,而使总应力超过强度极限时,便出现裂纹和断裂。零件的残余应力大部分都可通过适当的热处理消除。残余应力也有有益的方面,它可以被控制用来提高零件的疲劳强度和耐磨性能。 ...
GB/T 9639.1-2008塑料薄膜和薄片抗冲击性能试验方法自由落镖法第1部分:梯级法 5. ISO 7765-1-1988塑料膜及塑料板.用自由落体法测定冲击阻力.第1部分:梯级法 6. ASTM D1709用自由落镖法测定塑料薄膜冲击强度的试验方法 7....
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号