IEC 62040-1-2017
不间断电源系统(UPS).第1部分:安全要求

Uninterruptible power systems (UPS) - Part 1: Safety requirements

IEC 62040-1-2017 发布历史

This part of IEC 62040 applies to movable, stationary, fixed or built-in UPS for use in low- voltage distribution systems and that are intended to be installed in an area accessible by an ordinary person or in a restricted access area as applicable, that deliver fixed frequency AC output voltage with port voltages not exceeding 1000 V AC or 1500 V DC and that include an energy storage device. It applies to pluggable and to permanently connected UPS, whether consisting of a system of interconnected units or of independent units, subject to installing, operating and maintaining the UPS in the manner prescribed by the manufacturer. NOTE 1 Typical UPS configurations, including voltage and/or frequency converters and other topologies, are described in IEC 62040-3, the test and performance product standard for UPS. NOTE 2 UPS generally connect to their energy storage device through a DC link. A chemical battery is used throughout the standard as an example of an energy storage device. Alternative devices exist, and as such, where "battery" appears in the text of this document, this is to be understood as "energy storage device". This document specifies requirements to ensure safety for the ordinary person who comes into contact with the UPS and, where specifically stated, for the skilled person. The objective is to reduce risks of fire, electric shock, thermal, energy and mechanical hazards during use and operation and, where specifically stated, during service and maintenance. This product standard is harmonized with the applicable parts of group safety publication IEC 62477-1:2012 for power electronic converter systems and contains additional requirements relevant to UPS. This document does not cover: UPS that have a DC output; systems for operation on moving platforms including, but not limited to, aircrafts, ships and motor vehicles; external AC or DC input and output distribution boards covered by their specific product standard; stand-alone static transfer systems (

IEC 62040-1-2017由国际电工委员会 IX-IEC 发布于 2017-07-00。

IEC 62040-1-2017 在中国标准分类中归属于: K85 电源设备，在国际标准分类中归属于: 29.160.40 发电机组,29.200 整流器、转换器、稳压电源。

IEC 62040-1-2017 发布之时，引用了标准

• IEC 60364-4-42-2010 低压电气设备.第4-42部分:安全防护.热效应防护
• IEC 60384-14-2013 电子设备用固定电容器. 第14部分: 分规范. 抑制电磁干扰和与电源连接用固定电容器
• IEC/TR 60755-2008 剩余电流驱动保护器的一般要求
• IEC 60947-2-2006 低压开关和控制设备.第2部分:断路器
• IEC 60950-1-2005 信息技术设备.安全.第1部分:一般要求
• IEC 61000-2-2-2002 电磁兼容性(EMC).第2-2部分:环境.在公用低压供电系统中低频传导骚扰和信号传输的兼容性水平
• IEC 61008-1-2010 家用及类似用途不带集成过电流保护的残余电流驱动的断路器(RCCBs).第1部分:一般规则
• IEC 61009-1-2010 家用及类似用途带集成过电流保护的残余电流驱动的断路器(RCBOs).第1部分:一般规则
• IEC 62040-2-2005 不间断电源系统(UPS).第2部分:电磁兼容性(EMC)要求
• IEC 62477-1-2012 电力电子转换器系统和设备用安全性要求.第1部分:总则

IEC 62040-1-2017的历代版本如下：

• 2002年12月 IEC 62040-1-1 CORR 1-2002 不间断电源系统(UPS).第1-1部分:操作人员经过区使用的UPS的一般和安全要求
• 2002年08月 IEC 62040-1-1-2002 不间断电源系统(UPS).第1-1部分:操作人员经过区使用的UPS的一般和安全要求
• 2004年02月 IEC 62040-1-1-2004 不间断电源系统(UPS).第1-1部分:操作人员经过区使用的UPS的一般和安全要求
• 2002年12月 IEC 62040-1-2 CORR 1-2002 不间断电源系统(UPS).第1-2部分:限制通过区使用的不间断电源系统(UPS)的一般和安全要求
• 2004年02月 IEC 62040-1-2-2004 不间断电源系统(UPS).第1-2部分:用于限定通路场所的UPS的一般和安全要求
• 2008年06月 IEC 62040-1-2008 不间断电源(UPS).第1部分:UPS用一般要求和安全要求
• 2013年01月10日 IEC 62040-1-2008/AMD1-2013 修改件1.不间断电源系统（UPS）.第1部分:UPS的一般要求和安全要求
• 2017年07月 IEC 62040-1-2017 不间断电源系统(UPS).第1部分:安全要求
• 2021年05月20日 IEC 62040-1-2017/AMD1-2021 修改件1.不间断电源系统（UPS）.第1部分:安全要求

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEC 62040-1-2017 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEC 62040-1-2017

发布日期

2017年07月

实施日期

废止日期

无

中国标准分类号

K85

国际标准分类号

29.160.40;29.200

发布单位

IX-IEC

引用标准

IEC 60364-4-42-2010 IEC 60384-14-2013 IEC/TR 60755-2008 IEC 60947-2-2006 IEC 60950-1-2005 IEC 61000-2-2-2002 IEC 61008-1-2010 IEC 61009-1-2010 IEC 62040-2-2005 IEC 62477-1-2012

被代替标准

IEC 22H/217/FDIS-2017 IEC 62040-1-2008 IEC 62040-1 CORR 1-2008 IEC 62040-1 AMD 1-2013 IEC 62040-1 Edition 1.1-2013

适用范围

This part of IEC 62040 applies to movable, stationary, fixed or built-in UPS for use in low- voltage distribution systems and that are intended to be installed in an area accessible by an ordinary person or in a restricted access area as applicable, that deliver fixed frequency AC output voltage with port voltages not exceeding 1000 V AC or 1500 V DC and that include an energy storage device. It applies to pluggable and to permanently connected UPS, whether consisting of a system of interconnected units or of independent units, subject to installing, operating and maintaining the UPS in the manner prescribed by the manufacturer. NOTE 1 Typical UPS configurations, including voltage and/or frequency converters and other topologies, are described in IEC 62040-3, the test and performance product standard for UPS. NOTE 2 UPS generally connect to their energy storage device through a DC link. A chemical battery is used throughout the standard as an example of an energy storage device. Alternative devices exist, and as such, where "battery" appears in the text of this document, this is to be understood as "energy storage device". This document specifies requirements to ensure safety for the ordinary person who comes into contact with the UPS and, where specifically stated, for the skilled person. The objective is to reduce risks of fire, electric shock, thermal, energy and mechanical hazards during use and operation and, where specifically stated, during service and maintenance. This product standard is harmonized with the applicable parts of group safety publication IEC 62477-1:2012 for power electronic converter systems and contains additional requirements relevant to UPS. This document does not cover: UPS that have a DC output; systems for operation on moving platforms including, but not limited to, aircrafts, ships and motor vehicles; external AC or DC input and output distribution boards covered by their specific product standard; stand-alone static transfer systems (

IEC 62040-1-2017系列标准

谁引用了IEC 62040-1-2017 更多引用