CEN/TS 16675-2014 发布历史

This Technical Specification provides methods, which can be used to assess the monolithic character of a stabilised/solidified waste, with respect to landfilling. Information on the monolithic character is required to enable the choice of appropriate leaching tests for determination of the release of different substances from stabilised/solidified waste under specified (landfilling) conditions. This document includes several physical and/or chemical test methods each addressing different aspects of monolithic character. The selection of methods required for an assessment of the monolithic character of a stabilised/solidified waste may vary, depending on the scenario to be addressed or it may be specified in regulation. Rather than describing the procedures and methods in detail this document refers to existing standards and provides some guidance on their use on stabilised/solidified waste materials. This Technical Specification does not address issues related to health and safety. The following procedures and methods are included in this document: test to determine unconfined compressive strength; - test to determine permeability; - test to determine the loss of mass by dissolution or disintegration; - test to determine expansion; - test to determine the content of organic matter; - test to determine freeze/thaw effects.

CEN/TS 16675-2014由欧洲标准化委员会 IX-CEN 发布于 2014-09。

CEN/TS 16675-2014在国际标准分类中归属于: 13.030.10 固态废物。

CEN/TS 16675-2014 发布之时，引用了标准

EN 12390-3-2009 硬化混凝土试验.第3部分:试件抗压强度
EN 12457-1-2002 废物特性.浸出.粒状废料和残渣浸出的符合性试验.第1部分:在2 l/kg的液固比下对高固体含量和粒子尺寸小于4mm的(没有或有尺寸缩减)材料进行一级批量试验
EN 13137-2001 废物特性.废物,污泥及沉淀物中总有机碳含量(TOC)的测定
EN 14346-2006 废弃物特征.通过测定干残渣或水含量计算干物质含量*， 2022-07-30 更新
EN 15002-2006 废弃物的表征.试验室样本的试验部分准备
CEN/TR 15177-2006 混凝土耐冻露性能的试验.内部结构损坏
EN 15216-2007
CEN/TS 15863-2012 废料的描述.浸出行为的测试基本的描述.与周期性leachant更新动态整体浸出试验,在固定的测试条件
CEN/TS 15864-2012 废料的描述.浸出行为测试基本描述动态整体浸出试验条件下连续leachant更新相关指定场景(年代)

* 在 CEN/TS 16675-2014 发布之后有更新，请注意新发布标准的变化。

CEN/TS 16675-2014的历代版本如下：

2014年09月 CEN/TS 16675-2014
2018年08月01日 CEN/TS 16675-2018

非常抱歉，我们暂时无法提供预览，您可以试试：免费下载 CEN/TS 16675-2014 前三页，或者稍后再访问。

注意：点击下载后，生成下载文件时间比较长，请耐心等待......

标准号: CEN/TS 16675-2014
发布日期: 2014年09月
实施日期
废止日期: 无
国际标准分类号: 13.030.10
发布单位: IX-CEN
引用标准: EN 12390-3-2009 EN 12457-1-2002 EN 13137-2001 EN 14346-2006 EN 15002-2006 CEN/TR 15177-2006 EN 15216-2007 CEN/TS 15863-2012 CEN/TS 15864-2012 CEN ISO/TS 17892-11-2004
被代替标准: FprCEN/TS 16675-2013

适用范围: This Technical Specification provides methods, which can be used to assess the monolithic character of a stabilised/solidified waste, with respect to landfilling. Information on the monolithic character is required to enable the choice of appropriate leaching tests for determination of the release of different substances from stabilised/solidified waste under specified (landfilling) conditions. This document includes several physical and/or chemical test methods each addressing different aspects of monolithic character. The selection of methods required for an assessment of the monolithic character of a stabilised/solidified waste may vary, depending on the scenario to be addressed or it may be specified in regulation. Rather than describing the procedures and methods in detail this document refers to existing standards and provides some guidance on their use on stabilised/solidified waste materials. This Technical Specification does not address issues related to health and safety. The following procedures and methods are included in this document: test to determine unconfined compressive strength; - test to determine permeability; - test to determine the loss of mass by dissolution or disintegration; - test to determine expansion; - test to determine the content of organic matter; - test to determine freeze/thaw effects.

CEN/TS 16675-2014

Characterisation of waste - Test methods for the determination of the monolithic status of waste