ISO 17632:2015
焊接消耗品.非合金钢及细粒钢气体保护的和非气体保护金属弧焊用药芯电极.分类

Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification

ISO 17632:2015 发布历史

ISO 17632:2015由国际标准化组织 IX-ISO 发布于 2015-11。

ISO 17632:2015 在中国标准分类中归属于: J33 焊接与切割，在国际标准分类中归属于: 25.160.20 焊接消耗品。

ISO 17632:2015 焊接消耗品.非合金钢及细粒钢气体保护的和非气体保护金属弧焊用药芯电极.分类的最新版本是哪一版？

最新版本是 ISO 17632:2015 。

ISO 17632:2015 发布之时，引用了标准

• ISO 13916:1996 焊接 预热温度、道间温度和预热维持温度测量的指南
• ISO 14175:2008 焊接消耗品.熔焊及相关工艺用气体和气体混合物
• ISO 14344:2010 焊接消耗品.填充物材料和助熔剂的采购
• ISO 15792-1:2000 焊接耗材 试验方法 第1部分:钢、镍和镍合金全焊金属试样的试验方法
• ISO 15792-2:2000 焊接耗材 试验方法 第2部分:钢单道焊和双道焊技术试样的制备
• ISO 15792-3:2011 焊接消耗品.试验方法.第3部分:角焊中焊接消耗品的根角熔深和填位能力的分类试验
• ISO 3690:2012 焊接和相关工艺.碳钢和低合金钢手工焊熔敷金属扩散氢的测定
• ISO 544:2011 焊接消耗品.焊补材料和钎焊剂的交货技术条件.产品类型,尺寸规格,公差和标识
• ISO 6847:2013 焊接耗材.化学分析用焊接金属的熔敷
• ISO 6947:2011 焊接和连接流程.焊接部位
• ISO 80000-1:2009 数量和单位.第1部分:通论

ISO 17632:2015的历代版本如下：

• 2015年 ISO 17632:2015 焊接消耗品.非合金钢及细粒钢气体保护的和非气体保护金属弧焊用药芯电极.分类
• 2004年 ISO 17632:2004 焊接消耗品.非合金钢及细粒钢气体保护的和非气体保护金属弧焊用药芯电极.分类

This International Standard specifies requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of non-alloy and fine grain steels in the as-welded condition or in the post-weld heat-treated condition with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. One tubular cored electrode can be tested and classified with different shielding gases, if any. This International Standard is a combined specification providing classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal. 1) Paragraphs and tables which carry the suffix letter “A” are applicable only to tubular cored electrodes classified to the system based upon the yield strength and the average impact energy of 47 J of all-weld metal in accordance with this International Standard. 2) Paragraphs and tables which carry the suffix letter “B” are applicable only to tubular cored electrodes classified to the system based upon the tensile strength and the average impact energy of 27 J of all-weld metal in accordance with this International Standard. 3) Paragraphs and tables which have neither the suffix letter “A” nor the suffix letter “B” are applicable to all tubular cored electrodes classified in accordance with this International Standard. It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current, but for the purposes of this International Standard, pulsed current is not permitted for determining the electrode classification.

采用 ISO 17632 的发行版本有：

• AS/NZS ISO 17632:2006 焊接消耗品．非合金和细粒钢的气体保护和非气体保护金属弧焊用管状药芯焊丝和焊条．分类（ISO 17632－2004，MOD）
• AS/NZS ISO 17632:2006 AS NZS ISO 17632 2006
• AS/NZS ISO 17632:2022 焊接材料 非合金钢和细晶粒钢气体保护和非气体保护金属电弧焊用管状药芯焊条 分类
• DS/EN ISO 17632:2008 焊接材料 非合金钢和细晶粒钢的气体保护和非气体保护金属电弧焊用管状药芯焊条 分类
• EN ISO 17632:2008 焊接消耗品.非合金和优质颗粒钢气体屏蔽和非气体屏蔽金属电弧焊接用管状芯电极.分类.[被代替:CEN EN 758]
• EN ISO 17632:2015 焊接消耗品.非合金和细晶粒钢的气体保护和非气体保护用的管状芯电极.分类(ISO 17632:2015)

标准号

ISO 17632:2015

发布

2015年

发布单位

国际标准化组织

当前最新

ISO 17632:2015

 

 

引用标准

ISO 13916:1996 ISO 14175:2008 ISO 14344:2010 ISO 15792-1:2000 ISO 15792-2:2000 ISO 15792-3:2011 ISO 3690:2012 ISO 544:2011 ISO 6847:2013 ISO 6947:2011 ISO 80000-1:2009

ISO 17632:2015相似标准

推荐

谁引用了ISO 17632:2015 更多引用