IEC 61869-6-2016
仪表用变压器. 第6部分: 低功率仪表变压器的通用额外要求

Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers

IEC 61869-6-2016 发布历史

This part of IEC 61869 is a product family standard and covers only additional general requirements for low-power instrument transformers (LPIT) used for a.c. applications having rated frequencies from 15 Hz to 100 Hz covering MV, HV and EHV or used for d.c. applications. This product standard is based on IEC 61869-1:2007, in addition to the relevant product specific standard. This part of IEC 61869 does not cover the specification for the digital output format of instrument transformers. This part of IEC 61869 defines the errors in case of analogue or digital output. The other characteristics of the digital interface for instrument transformers are standardised in IEC 61869-9 as an application of the standards, the IEC 61850 series, which details layered substation communication architecture. This part of IEC 61869 considers additional requirements concerning bandwidth. The accuracy requirements on harmonics and requirements for the anti-aliasing filter are given in the normative Annex 6A.4. The general block diagram of single-phase LPITs is given in Figure 601. According to the technology, it is not absolutely necessary that all parts described in Figure 601 are included in the instrument transformer. As an example, for low-power passive transformers (LPITs without active electronic components) the blocks are composed only with passive components and there is no power supply. Figure 601 - General block diagram of a single-phase LPIT

IEC 61869-6-2016由国际电工委员会 IX-IEC 发布于 2016-04。

IEC 61869-6-2016 在中国标准分类中归属于: L85 电子测量与仪器综合,L17 电感器、变压器，在国际标准分类中归属于: 17.220.20 电和磁量值的测量。

IEC 61869-6-2016 发布之时，引用了标准

• CISPR 11-2015 工业,科技和医疗设备.无线电频率干扰特性.测量限值和方法
• EN 50160-2010 公用配电网供电的电压特性
• IEC 60068-2-6-2007 环境试验.第2-6部分:试验.试验Fc:振动(正弦波)
• IEC 60255-27-2013 测量继电器和保护设备.第27部分:产品安全性要求
• IEC 60603-7-1-2011 电子设备连接器.第7-1部分:8路屏蔽自由式和固定式连接器的详细规范
• IEC 60794-2-2002 光缆.第2部分:室内光缆.分规范
• IEC 60794-3-2014 光纤电缆. 第3部分: 室外电缆. 分规格
• IEC 60812-2006 系统可靠性分析技术.失效模式和效应分析(FMEA)程序
• IEC 61000-4-1-2006 电磁兼容性.第4-1部分:试验和测量技术.IEC 61000-4系列综述
• IEC 61000-4-2-2008 电磁兼容性(EMC).第4-2部分:试验和测量技术.静电放电抗扰试验
• IEC 61000-4-3-2006 电磁兼容性.第4-3部分:试验和测量技术.辐射、射频和电磁场的抗扰性试验
• IEC 61000-4-3 AMD 1-2007 电磁兼容性(EMC).第4-3部分:试验和测量技术.辐射、射频、电磁场抗扰度试验.修改件1
• IEC 61000-4-3 AMD 2-2010 电磁兼容性(EMC).第43部分:试验和测量技术.辐射、射频和电磁场干扰试验.修改件2
• IEC 61000-4-4-2012 电磁兼容性(EMC).第4-4部分:试验和测量技术.快速瞬变脉冲/脉冲串抗扰性试验
• IEC 61000-4-5-2014 电磁兼容性(EMC).第4-5部分:试验和测量技术.电涌抗扰试验
• IEC 61000-4-6-2013 电磁兼容性(EMC).第4-6部分:测试和测量技术.射频场感应的传导干扰抗扰性
• IEC 61000-4-7-2002 电磁兼容性(EMC).第4-7部分:试验和测量技术.供电系统及所连设备谐波和谐间波的测量和仪器仪表的通用指南
• IEC 61000-4-7 AMD 1-2008 电磁兼容性(EMC).第4-7部分:测试和测量技术.供电系统及其相连设备谐波和谐间波的测量和使用仪器的通用指南
• IEC 61000-4-8-2009 电磁兼容性(EMC).第4-8部分:试验和测量技术.工频磁场抗扰度试验
• IEC 61000-4-9-1993 电磁兼容性(EMC) 第4部分:试验和测量技术 第9节:脉冲磁场抗扰度试验 基础EMC出版物
• IEC 61000-4-9 AMD 1-2000 电磁兼容性(EMC) 第4部分:试验和测量技术 第9节:脉冲磁场抗扰度试验 基础EMC出版物 修改1
• IEC 61000-4-10-1993 电磁兼容性(EMC) 第4部分:试验和测量技术 第10节:阻尼振荡磁场抗扰度试验 基础EMC出版物
• IEC 61000-4-10 AMD 1-2000 电磁兼容性(EMC) 第4部分:试验和测量技术 第10节:阻尼振荡磁场抗扰度试验 基础EMC出版物 修改1
• IEC 61000-4-11-2004 电磁兼容性(EMC).第4-11部分:试验和测量技术.电压暂降、短时中断及电压变化抗扰度试验
• IEC 61000-4-13-2002 电磁兼容性(EMC).第4-13部分:试验和测量技术.包括交流电功率端口主要传输信号的低频抗扰试验的谐波和中间谐波

IEC 61869-6-2016的历代版本如下：

• 2016年04月 IEC 61869-6-2016 仪表用变压器. 第6部分: 低功率仪表变压器的通用额外要求

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEC 61869-6-2016 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEC 61869-6-2016

发布日期

2016年04月

实施日期

废止日期

无

中国标准分类号

L85;L17

国际标准分类号

17.220.20

发布单位

IX-IEC

引用标准

CISPR 11-2015 EN 50160-2010 IEC 60068-2-6-2007 IEC 60255-27-2013 IEC 60603-7-1-2011 IEC 60794-2-2002 IEC 60794-3-2014 IEC 60812-2006 IEC 61000-4-1-2006 IEC 61000-4-2-2008 IEC 61000-4-3-2006 IEC 61000-4-3 AMD 1-2007 IEC 61000-4-3 AMD 2-2010 IEC 61000-4-4-2

被代替标准

IEC 38/501/FDIS-2016 IEC 60044-7-1999(部分代替) IEC 60044-8-2002(部分代替)

适用范围

This part of IEC 61869 is a product family standard and covers only additional general requirements for low-power instrument transformers (LPIT) used for a.c. applications having rated frequencies from 15 Hz to 100 Hz covering MV, HV and EHV or used for d.c. applications. This product standard is based on IEC 61869-1:2007, in addition to the relevant product specific standard. This part of IEC 61869 does not cover the specification for the digital output format of instrument transformers. This part of IEC 61869 defines the errors in case of analogue or digital output. The other characteristics of the digital interface for instrument transformers are standardised in IEC 61869-9 as an application of the standards, the IEC 61850 series, which details layered substation communication architecture. This part of IEC 61869 considers additional requirements concerning bandwidth. The accuracy requirements on harmonics and requirements for the anti-aliasing filter are given in the normative Annex 6A.4. The general block diagram of single-phase LPITs is given in Figure 601. According to the technology, it is not absolutely necessary that all parts described in Figure 601 are included in the instrument transformer. As an example, for low-power passive transformers (LPITs without active electronic components) the blocks are composed only with passive components and there is no power supply. Figure 601 - General block diagram of a single-phase LPIT

IEC 61869-6-2016系列标准

谁引用了IEC 61869-6-2016 更多引用