ASTM B762-90(2016)
金属和无机涂层变量抽样的标准试验方法
Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
ASTM B762-90(2016) 发布历史
ASTM B762-90(2016)由美国材料与试验协会 US-ASTM 发布于 1990。
ASTM B762-90(2016) 在中国标准分类中归属于: A29 材料防护。
ASTM B762-90(2016) 发布之时，引用了标准
* 在 ASTM B762-90(2016) 发布之后有更新，请注意新发布标准的变化。
ASTM B762-90(2016)的历代版本如下：
- 2021年 ASTM B762-21 金属和无机涂层的取样变量的标准指南
- 1990年 ASTM B762-90(2016) 金属和无机涂层变量抽样的标准试验方法
- 1990年 ASTM B762-90(2010) 金属涂层和无机物涂层的不同抽样的标准试验方法
- 1990年 ASTM B762-90(2005) 金属涂层和无机物涂层的不同抽样
- 1990年 ASTM B762-90(1999) 金属涂层和无机物涂层的不同抽样的标准试验方法
5.1 Sampling inspection permits the estimation of the overall quality of a group of product articles through the inspection of a relatively small number of product articles drawn from the group.
5.2 The specification of a sampling plan provides purchasers and sellers a means of identifying the minimum quality level that is considered to be satisfactory.
5.3 Because sampling plans yield estimates of the quality of a product, the results of the inspection are subject to error. Through the selection of a sampling plan, the potential error is known and controlled.
5.4 Sampling inspection is used when a decision must be made about what to do with a quantity of articles. This quantity may be a shipment from a supplier, articles that are ready for a subsequent manufacturing operation, or articles ready for shipment to a customer.
5.5 In sampling inspection, a relatively small number of articles (the sample) is selected randomly from a larger number of articles (the inspection lot); the sample is inspected for conformance to the requirements placed on the articles. Based on the results, a decision is made whether or not the lot conforms to the requirements.
5.6 Since only a portion of a production lot is inspected, the quality of the uninspected articles is not known. The possibility exists that some of the uninspected articles are nonconforming. Therefore, basic to any sampling inspection plan is the willingness of the buyer to accept lots that contain some nonconforming articles. The number of nonconforming articles in accepted lots is controlled by the size of the sample and the criteria of acceptance that are placed on the sample.
5.7 Acceptance sampling plans are used for the following reasons:
5.7.1 When the cost of inspection is high and the consequences of accepting a nonconforming article are not serious.
5.7.2 When 1008201;% inspection is fatiguing and boring and, therefore, likely to result in errors.
5.7.3 When inspection requires a destructive test, sampling inspection must be used.
5.8 In acceptance sampling by variables, the coating characteristic of each article in the sample is measured. Using the arithmetic mean of these values, the standard deviation of the process, and the factor k that is found in the Tables, a number is calculated (see 9.3). If this number equals or exceeds the specified minimum, the inspection lot conforms to the requirements. If it is less, the lot does not conform. If the standard deviation of the process is not known, the standard deviation of the sample is calculated and used.
5.9 The use of a sampling plan involves the balancing of the costs of ......
- 标准号
- ASTM B762-90(2016)
- 发布
- 1990年
- 发布单位
- 美国材料与试验协会
- 替代标准
- ASTM B762-21
- 当前最新
- ASTM B762-21
- 引用标准
- ASTM B602 ASTM B697 MIL-STD-105 MIL-STD-414