01.070 颜色编码 标准查询与下载

OVE EN IEC 60757:2020 颜色指定代码（IEC 3/1457/CDV）（英文版）

Code for designation of colours (IEC 3/1457/CDV) (english version)

ASTM E1273-88(2019) 可重复使用的实验室管道颜色编码标准规范

1.1 This specification covers a system of color coding for one-mark pipets for identification of nominal capacities, and for graduated pipets for identification of nominal capacities and units of sub-division. 1.2 This specification applies to one-mark and graduated pipets of the nominal capacities listed in Table 1 and Table 2, respectively. NOTE 1—Many pipets not covered by other ASTM standards are included in Table 1 and Table 2, in order, firstly, to ensure uniformity of color coding as far as possible for non-standard as well as standard pipets and, secondly, to reserve suitable codes for possible future standards for other types of pipet. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Color Coding of Reusable Laboratory Pipets

GSO IEC 60073:2017 人机界面、标记和识别的基本和安全原则 指示器和执行器的编码原则

This International Standard establishes general rules for assigning particular meanings to certain visual, acoustic and tactile indications in order to – increase the safety of persons, property and/or the environment through the safe monitoring and control of the equipment or process; – facilitate the proper monitoring, control and maintenance of the equipment or process; – facilitate the rapid recognition of control conditions and actuator positions. This standard is for general application: – from simple cases such as single indicator lights, push-buttons, mechanical indicators, light emitting diodes (LEDs) or video display screens to extensive control stations which may include a wide variety of devices for controlling an equipment or process; NOTE Application of the general coding principles for displays on screens should be carried out without modification. – where the safety of persons, property and/or the environment is involved, and also where the above-mentioned codes are used to facilitate the proper monitoring and controlling of equipment; – where a particular kind of coding is to be assigned by a technical committee to a special function.

Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators

GSO ISO 3864-2:2017 图形符号 安全颜色和安全标志 第2部分：产品安全标签的设计原则

  Scope is not provided for this standard

Graphical symbols - Safety colours and safety signs - Part 2: Design principles for product safety labels

GSO ISO 3864-1:2017 图形符号 安全颜色和安全标志 第1部分：安全标志和安全标志的设计原则

ISO 3864-1:2011 establishes the safety identification colours and design principles for safety signs and safety markings to be used in workplaces and in public areas for the purpose of accident prevention, fire protection, health hazard information and emergency evacuation. It also establishes the basic principles to be applied when developing standards containing safety signs. ISO 3864-1:2011 is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, generally speaking, to those sectors subject to a regulation which may differ.

Graphical symbols — Safety colours and safety signs - Part 1: Design principles for safety signs and safety markings

GSO ISO 7711-3:2016 牙科 金刚石旋转器械 第3部分：粒度、名称和颜色代码

This part of ISO 7711 specifies the designation, colour code and grit sizes for diamond rotary instruments which are used commonly in a dental surgery. It applies to all types of dental diamond rotary instruments independent of type and shape. NOTE Attention is drawn to ISO 6360 which specifies a number coding system for the identification of dental rotary instruments of all types.

Dentistry -- Diamond rotary instruments -- Part 3: Grit sizes, designation and colour code

DB12/T 623-2016 产（商）品及服务关键词分类规范

本标准适用于天津市市场和质量监督管理委员会投诉举报中心产（商）品及服务关键词分类。

Product (commercial) product and service keyword classification specification

DB12/T 624-2016 投诉举报业务产（商）品和服务分类代码

本标准适用于天津市市场和质量监督管理委员会投诉举报中心产（商）品与服务分类代码编号。

Complaints and Reporting Business Product (Commodity) Product and Service Classification Code

ASTM D7856-15a CIELab颜色空间使用固态杂色塑料壁板产品的颜色和外观保持性的标准规格

1.1 This specification establishes requirements and test methods for the color and appearance retention of solid and variegated colored plastic siding products. 1.2 Color retention testing provides a method for estimating the acceptability of color change in a plastic siding product over an extended period of service. Note 1: The exposure locations and durations specified in this standard have been shown to provide a good estimation of the color change in vinyl and polypropylene siding products over an extended period of service (see 2.2). It is expected that materials designed for the exposure conditions typical of exterior siding will respond similarly, but the applicability of this standard to other types of plastic siding has not been empirically established. 1.3 This specification is a successor to Specifications D6864 and D7251, which cover solid colors and variegated colors, respectively. This specification combines coverage for both, and has the same scope as those standards. 1.4 Specifications D6864 and D7251 use Hunter Lab color space for measurement of colors and evaluation of color change. These standards require classification of colors into regions based on the L, a, and b coordinates of the color, and evaluation of color changes is done using an ellipsoid value equation having unique coefficients for each color region. This specification uses CIE 1976 L* a* b* color space for measurement and evaluation of color change. Using this method, the need for separate color regions and evaluation equations has been eliminated. 1.5 Provisions for sample selection and preparation, and weathering are the same in this specification as in Specifications D6864 and D7251. 1.6 Characterization of color and appearance for variegated colors is complicated by the presence of multiple colors in a random pattern. The procedure for measuring variegated colors in this specification is based on using a template to reference six spots for color measurement. 1.7 This standard specifies outdoor weathering in three specific climate zones for a single 24-month exposure, and the color retention performance requirements under these conditions are established to be indicative of acceptable performance over an extended period of service. However, nothing in this standard precludes the use of different or additional climate zones, or different exposure durations, so long as those conditions are clearly specified in any reports. 1.8 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space

GSO ISO 6217:2014 造船 内河航行 引航艇 铭牌和铭文

This International Standard provides unified colour diagrams of the outside painting and the identification marking of pilot craft to permit identification thereof in heavy weather, in order to improve the efficiency of pilot service and the safety of navigation.

Shipbuilding -- Inland navigation -- Pilot craft -- Identification painting and inscriptions

GSO ISO 14726:2014 船舶和海洋技术 管道系统的颜色识别

This International Standard specifies main colours and additional colours for identifying piping systems in accordance with the content or function on board ships and marine structures. These colours can also be used for piping systems on drawings and diagrams. This International Standard does not apply to piping systems for medical gases, industrial gases and cargo. This International Standard can also be used for land installations.

Ships and marine technology -- Identification colours for the content of piping systems

GSO ISO 9247:2013 土方机械 电缆和电线 识别和标记基础知识

  Scope is not provided for this standard

Earth-moving machinery -- Electrical wires and cables -- Principles of identification and marking

GSO ISO 32:2013 医用气瓶 内容标记数据

تحدد هذه المواصفة القياسية الخليجية نظام وضع البيانات الإيضاحية وسلسلة الألوان لتمييز المحتوى لإسطوانات الغاز المستخدمة للأغراض الطبية فقط .

Gas cylinders for medical use – Marking for identification of content

GSO ISO 6009:2013 一次性皮下注射剂采用颜色编码

This lnternationa1 Standard establishes a colour code for the identification of single-use hypodermic needles of nominal outside diameters in the range 0,3 mm to 3,4 mm. It applies to normal-walled, thin­ walled and extra-thin-walled needles and to opaque and translucent colours.

Hypodermic needles for single use - Colour coding for identification

LY/T 1917-2010 观赏植物颜色表示方法

本标准规定了观赏植物花朵及叶、果、枝等观赏部位颜色的表示方法。本标准适用于观赏植物颜色的表示。

Color specification for ornamental plant

ASTM D7195-06(2012) 材料的颜色编码规范协议用标准指南

1.1 This guide leads the user through the process for setting a color tolerance for a product or material. It points to the appropriate ASTM standards that affect each step of the process. It includes the discussion points on which the two parties must agree and provides caveats for various options selected. 1.2 This guide does not suggest numerical values for tolerances. These values must be agreed upon by the two parties involved. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Protocol for Setting Color Specifications for a Material

KS A 3501-2005 安全颜色和安全标志

Safety colours and safety signs

SNI 04-7024-2004 颜色标志的代号

Codes for designation of colours

KS A 3501-2000 安全颜色和安全标志

Safety colours and safety signs

BS 381C:1996 识别,编码和专用颜色规范

Specifies the numbers and names and illustrates 91 standard colours. The colours do not constitute a coordinated range and are not limited to any particular medium (e.g. paint, plastics etc.).

Specification for colours for identification, coding and special purposes