13.030.10 固态废物 标准查询与下载

DB34/T 3597-2020 低温热泵式污泥干化通用技术规程

General Technical Regulations for Low Temperature Heat Pump Sludge Drying

T/CRRA 9901-2020 废碳纤维复合材料编码规则

本标准设置8个章节，具体包括： (1)范围 明确标准的适用范围。 (2)规范性引用文件 详细列出本标准使用时所涉及的规范性文件。 (3)术语和定义 对“废碳纤维复合材料”进行了界定。“废碳纤维复合材料”指在社会生产和生活过程中产生的，已经失去原有全部或部分使用价值的碳纤维复合材料。 （4）编码原则 规定了根据废物减量化原则，最大限度地对生产、流通、消费过程中产生的废碳纤维复合材料进行编码，促进再利用，减少废弃物的最终处置，减少因编码不善造成资源难以回收。根据类别、碳纤维重量含量、废弃物形式、特殊成分、废弃物产生领域、碳纤维级别以及树脂材质对废碳纤维复合材料进行编码或根据实际回收需求进行编码。 （5）代码结构组成 规定了废碳纤维复合材料详细的代码结构组成，包括类别代码、废弃物产生领域代码、废弃物形式代码、特殊成分代码、碳纤维重量含量（Carbon Fiber重量含量）代码、碳纤维级别（Carbon Fiber级别)代码、树脂材质代码。 （6）代码结构表示方法 逐条阐述了每条代码的含义，并列表列举了废碳纤维复合材料代码结构表示方法。 （7）数据载体 阐述了代码的标识方式和标识载体。 （8）示例 以示例的形式，说明了编码的具体使用方法。

Coding rules for waste carbon fiber composites

T/SHCDA 000001-2020 水性建筑涂料固体废物属性鉴别及管理要求

本标准适用于水性建筑涂料企业生产过程中产生的固体废物，包括：生产过程中产生的废水处理污泥和废弃包装物、容器（包括水性内外墙涂料、各种填料、乳液、湿润分散剂、增稠剂、pH调节剂）。

Attribute identification and management for solid wastes of water-based architectural coatings

DB53/T 967-2020 畜禽粪便好氧堆肥化操作规程

Operating rules for aerobic composting of livestock and poultry manure

DB53/T 970-2020 农业与农村固体废物分类收集处理技术规范

Technical specification for classified collection and treatment of agricultural and rural solid waste

T/ZSA 62-2019 餐厨废弃物资源化还田项目温室气体减排量核算技术规范

温室气体的过量排放是引起全球气候变化的主要原因，减少温室气体的排放将可以减缓温室效应、放慢气候变暖的步伐，这对人类的生存具有重大意义。控制温室气体排放、减缓气候变化已成为我国实施可持续发展战略的重要组成部分。 在国际应对气候变化和国内经济转型的双重压力下，温室气体排放管控已成为我国推进节能减排、调整产业结构的重要抓手和开展生态文明建设的基础工具，国家在“十二五”期间制定了一系列节约能源和气候变化相关的政策。 面对温室气体的排放管控，各行业都投入了大量的人力、物力用于开发和推广温室气体减排技术和土壤固碳技术，而碳减排量作为评价减排和固碳技术效果的重要指标，如何对其进行准确监测和核算，是相关领域技术人员需要考虑的重要问题。 本指南采用的是高温好氧发酵技术，对餐厨废弃物进行资源化还田利用，标准化控制，日处理量高，温室气体排放量降低，同时改良了土壤，减少了废渣、废水等污染物的排放，环境效益明显。

Technical specification for accounting for greenhouse gas emission reductions for food waste recycling projects

DB45/T 2065-2019 美丽乡村 生活垃圾分类处理技术规范

Technical specifications for classification and treatment of domestic waste in beautiful villages

DB61/T 1271-2019 农村人居环境 生活垃圾管理要求

本标准适用于农村生活垃圾的管理

Requirements for the management of domestic waste in rural human settlements

ASTM D5232-19 测定固体、半固体或液体废料的稳定性和混溶性的标准实施规程

1.1 This practice is designed to determine whether a waste material reacts when it is mixed with air, water, strong acid, strong base, an oil/solvent mixture, other waste mixtures, or solid media such as a geological formation or solidification agents. 1.2 The miscibility of the waste material with the above media can also be defined. NOTE 1—The following ASTM standards provide supplemental information: Test Methods D4978, D4980, D4982, D5049, and D5057 and Practices D4979, D4981, and D5058. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material

T/ZGCERIS 0002-2019 利用园林废弃物生产有机肥还田项目温室气体减排量核算技术规范

本标准给出了利用园林废弃物生产有机肥还田项目的基准线情景、项目活动、主要排放源及温室气体种类，基准线排放和项目排放的核算方法、同时给出了项目活动水平数据的监测方法、监测频率、保存时间，以及不需要监测的排放因子及相关参数。

Technical specification for assessment of greenhouse gas emission reductions- Returning to the field of Organic fertilizers generated from garden wastes

ASTM E1109-19 确定固体废物馏分体积密度的标准试验方法

1.1 This test method may be used to determine the bulk density of various fractions from the resource recovery processing of municipal solid waste. It is intended as a means of characterizing such fractions and for providing data useful to designers of solid waste processing plants. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining the Bulk Density of Solid Waste Fractions

DB63/T 1723-2018 石棉尾矿污染控制技术规范

Technical specification for pollution control of asbestos tailings

DB14/T 1755-2018 煤矸石堆场生态恢复治理技术规范

本标准规定了煤矸石堆场生态恢复治理的术语和定义、煤矸石堆场分类及分区、治理原则及工作内容、煤矸石堆场调查评估、煤矸石堆场治理工程、施工与验收、后期管理与维护。本标准适用于我省历史堆存煤矸石堆场的生态恢复治理。自标准发布之日起已完成生态恢复治理的除外，正在实施生态恢复治理的可参照执行。

Technical Specifications for Ecological Restoration and Treatment of Coal Gangue Storage Yard

CJ/T 531-2018 生活垃圾焚烧灰渣取样制样与检测

　　现批准《生活垃圾焚烧灰渣取样制样与检测》为城镇建设行业产品标准，编号为CJ/T531-2018，自2019年4月1日起实施。 　　本标准在住房城乡建设部门户网站（www.mohurd.gov.cn）公开，并由住房城乡建设部标准定额研究所组织中国标准出版社出版发行。 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　中华人民共和国住房和城乡建设部 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　2018年11月7日

Sampling preparation and detection of domestic waste incineration ash

ASTM E701-80(2018) 市有色金属废料标准试验方法

1.1 These test methods cover various tests for assessing the usefulness of a ferrous fraction recovered from municipal wastes. 1.2 These test methods comprise both chemical and physical tests, as follows: Section Sampling 5 Bulk Density 6 Total Combustibles 7 Chemical Analysis (for Industries Other Than the Detinning Industry) 8 Magnetic Fraction (for the Detinning Industry) 9 Chemical Analysis for Tin (for the Detinning Industry) 10 Metallic Yield for All Industries Other Than the Copper Industry and the Detinning Industry 11 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Municipal Ferrous Scrap

T/ZGCERIS 00012-2018 农业有机废弃物（畜禽粪便）循环利用项目碳减排量核算指南

本标准提供了畜禽粪便循环利用项目碳减排量核算方法，包括核算原则与流程、项目边界、基准线识别、核算方法和监测方法。

Guideline of carbon emission reductions accounting for project on agricultural organic wastes（livestock munure） recycling

ASTM D5744-18 用湿度计测定固体材料实验室风化的标准试验方法

1.1 This kinetic test method covers a laboratory weathering procedure that (1) enhances reaction-product transport in the aqueous leach of a solid material sample of specified mass, and (2) measures rates of weathering-product mass release. Soluble weathering products are mobilized by a fixed-volume aqueous leach that is performed and collected weekly. Leachate samples are analyzed for pH, alkalinity/acidity, specific conductance, sulfate, and other selected analytes. 1.1.1 This test method is intended for use to meet kinetic testing regulatory requirements for mining waste rock and ores sized to pass a 6.3-mm (0.25-in.) Tyler screen. 1.1.2 Interlaboratory testing of this method has been confined to mine waste rock. Application of this test method to metallurgical processing waste (for example, mill tailings) is outside the scope of the test method. 1.2 This test method is a modification of a laboratory weathering procedure developed originally for mining wastes (1-3).2 However, it may have useful application wherever gaseous oxidation coupled with aqueous leaching are important mechanisms for contaminant mobility. 1.3 This test method calls for the weekly leaching of a well-characterized solid material sample (weighing at least 1000 g) with water of specified purity, and the collection and chemical characterization of the resulting leachate. Test duration is determined by the user’s objectives of the test. See Guide D8187.3 1.4 As described, this test method may not be suitable for some materials containing plastics, polymers, or refined metals. These materials may be resistant to traditional particle size reduction methods. 1.5 Additionally, this test method has not been tested for applicability to organic substances and volatile matter. 1.6 This test method is not intended to provide leachates that are identical to the actual leachate produced from a solid material in the field or to produce leachates to be used as the sole basis of engineering design. 1.7 This test method is not intended to simulate site-specific leaching conditions. It has not been demonstrated to simulate actual disposal site leaching conditions. Furthermore, the test is not designed to produce effluents that are in chemical equilibrium with the solid phase sample. 1.8 This test method is intended to describe the procedure for performing the laboratory weathering of solid materials. It does not describe all types of sampling and analytical requirements that may be associated with its application. 1.9 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.9.1 Exception—The values given in parentheses are for information only. 1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.11 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell

BS PD CEN/TS 16675:2018 废弃物的特性描述 用于测定废弃物整体状况的试验方法

Waste. Test methods for the determination of the monolithic status of waste to be landfilled

PD CEN/TS 16675:2018 浪费 确定待填埋废物整体状态的试验方法

Waste. Test methods for the determination of the monolithic status of waste to be landfilled

HG/T 5362-2018 含铬废液处理处置方法

Treatment and disposal methods of chromium-containing waste liquid