共找到 167 条与 空气质量 相关的标准,共 12 页
N/A
Motor vehieles - Methods of testing gaseous pollutants to the emitted atmophere from heavy duty diesel engined vehicles – Part 2 : Determination of smoke density (According To EURO 4)
N/A
Motor vehieles allowable limits of gaseous pollutants emitted to the atmosphere from heavy duty diesel engined vehicles (According To EURO 4)
本标准规定了在用点燃式发动机汽车瞬态工况法排气污染物测量的主要设备——底盘测功机、排气分析仪、流量计及取样系统的规格、功能和性能的技术要求及测试方法,计算机控制软件功能的基本要求;检测站日常设备检验、检测站现场安装设备检验和型式核准设备检验的项目要求和测试方法。本标准适用于在用点燃式发动机汽车瞬态工况法排气污染物测量设备的生产、使用和型式核准检验。本标准为首次颁布。
Equipment Specifications and Quality Control Requirements for In-use Vehicles with Ignition Engine Exhaust Emission Test in Transient Loaded Mode
本标准规定了底盘测功机和五气分析仪的规格、功能和性能的技术要求及测试方法,计算机控制软件功能的基本要求等。本标准规定了检测站日常检验、检测站现场安装检验和型式核准检验的项目要求和测试方法。在型式核准检验的项目方面,规定了必须核准检验的项目,也规定了根据具体情况可选择的核准检验的项目。本标准适用于汽油车稳态工况法排气污染物测量设备的生产、使用和型式核准检验。本标准为首次颁布。
Equipment Specifications and Quality Control Requirements for Gasoline Vehicles Exhaust Emission Test in Steady-state Loaded Mode
Burning Velocity of 1, 1-diflurorethane (R-152a)
Burning Velocity of 1, 1-diflurorethane (R-152a)
Air quality-Particle size fraction definitions for health-related sampling
Glossary of terms relating to air quality
Air quality-Determination of gaseous sulphur compounds in ambient air(Sampling equipment)
A CHP System Optimization with Microturbine Recuperation Control
A CHP System Optimization with Microturbine Recuperation Control
Demonstration of a 30-kW Microturbine with heat Recovery in a 500-Soldier Barracks
Demonstration of a 30-kW Microturbine with heat Recovery in a 500-Soldier Barracks
Dynamic Performance of a 30-kW Microturbine-Based CHP System
Dynamic Performance of a 30-kW Microturbine-Based CHP System
Planning of ambient air quality monitoring
Planning of ambient air quality monitoring
AIR QUALITY - PRESENTATIOM OF AMBIENT AIR QUALITY DATA IN ALPHANUMERICAL FORM
本标准对大气污染物无组织排放监控点设置方法、监测气象条件的判定和选择、监测结果的计算等作出规定和指导,是GB 16297-1996《大气污染物综合排放标准》附录C的补充即具体化。 本标准适用于环境监测部门为实施GB 16297-1996附录C,对大气污染物无组织排放进行的监测,亦适用于各污染源单位为实行自我管理而进行的同类监测。 本标准为技术指导性文件,环境监测部门应按照GB 16297-1996附录C的规定和原则要求,参照具体情况和需要,执行标准相应的规定和要求。 工业炉窑、炼焦炉、水泥厂的大气污染物无组织排放监测点设置,仍按其相应大气污染物排放标准GB 9078-1996;GB 16171-1996;GB 4915-1996中的有关规定执行,其余有关问题参照本标准的规定执行。
Technical guidelines for fugitive emission monitoring of air pollutants
This standard is concerned with the methods for determination of the exhaust gaseous pollutants emitted in the exhaust gases of new light duty diesel engined vehicles.
MOTOR VEHICLES – METHODS OF TESTING FOR POLLUTANTS EMITTED FROM LIGHT DUTY DIESEL ENGINED VEHICLES – PART 1: DETERMINATION OF EXHAUST GASEOUS POLLUTANTS
本标准规定了脉冲喷吹类袋式除尘器用钢制带圆角和正方形和圆形截面分气箱的设计、制造和检验要求。 本标准适用于使用温度-20~+120℃、设计压力﹤0.7MPa、充气压缩气体供脉冲阀间断喷吹的分气箱。 下列分气箱不属于本标准的范围: a)带圆角的正方形截面分气箱外径长度H﹥300mm; b)外加强带圆角的正方形截面分气箱。
Bag filter.Safety rules.Manifold for pulse-jet bag filter
AIR QUALITY - PRESENTATIOM OF AMBIENT AIR QUALITY DATA IN ALPHANUMERICAL FORM
General technical conditions for dust sampler calibration devices
Methane calibration gas technical conditions in air
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号