13.040.01 空气质量综合 标准查询与下载

GSO ISO 20988:2009 空气质量 估计测量不确定度的证据

This International Standard provides comprehensive guidance and specific statistical procedures for uncertainty estimation in air quality measurements including measurements of ambient air, stationary source emissions, indoor air, workplace atmospheres and meteorology. It applies the general recommendations of the Guide to the Expression of Uncertainty in Measurement (GUM) to boundary conditions met in air quality measurement. The boundary conditions considered include measurands varying rapidly in time, as well as the presence of bias in a series of observations obtained under conditions of intended use of methods of air quality measurement. The methods of measurement considered comprise ? methods corrected for systematic effects by repeated observation of reference materials, ? methods calibrated by paired measurement with a reference method, ? methods not corrected for systematic effects because they are unbiased by design, and ? methods not corrected for systematic effects in intended use deliberately taking into account a bias. Experimental data for uncertainty estimation can be provided either by a single experimental design in a direct approach or by a combination of different experimental designs in an indirect approach.

Air quality - Guidelines for estimating measurement uncertainty

DIN ISO 4226:2009 空气质量.一般效应.测量装置

This International Standard lays down the units to be used when reporting results of air quality measurements. NOTE General guidance on the International System of Units is given in ISO 1000.

Air quality - General aspects - Units of measurement (ISO 4226:2007);English version of DIN ISO 4226:2009-02

DIN 33881-1:2009 用检测器管测量.第1部分:分类

Measurement by means of detector tubes - Part 1: Classification

ANSI/UL 2034-2009 单一和多测点一氧化碳报警器

Revisions to the following: 1. Requirement for Battery Backup and Revision to Backup Time 2. Marking Requirements for RV and Unconditioned Area CO Alarms 3. Marine Battery Temperature Requirements 4. RV Unconditioned Area Battery Temperature Requirements

Single and Multiple Station Carbon Monoxide Alarms

GOST R ISO 16362-2009 周围空气.高性能液态层离法进行的离子相多环芳香烃测定

Ambient air. Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography

KS I ISO 16017-1-2008(2023) 室内、环境和工作场所空气.用吸附管/热解吸/毛细管气相色谱法对挥发性有机化合物进行取样和分析.第1部分:泵送取样

Indoor, ambient and workplace air－Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/ capillary gas chromatography－Part 1：Pumped sampling

KS I ISO 16017-1-2008(2018) 室内、环境和工作场所空气用吸附管/热解吸/毛细管气相色谱法对挥发性有机化合物的取样和分析第1部分:泵送取样

Indoor, ambient and workplace air－Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/ capillary gas chromatography－Part 1：Pumped sampling

KS I ISO 16017-1:2008 室内、环境和工作场所空气.用吸附管/热解吸/毛细管气相色谱法作挥发性有机化合物的取样及分析.第1部分:注塑模具采样

이 표준은 공기 중의 휘발성 유기화합물의 샘플링과 분석에 관한 일반적인 지시 사항에 대하여

Indoor, ambient and workplace air－Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/ capillary gas chromatography－Part 1：Pumped sampling

KS I ISO 14956-2008(2018) 空气质量－通过与要求的测量不确定度进行比较来评估测量程序的适用性

Air quality－Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty

KS I ISO 14956:2008 空气质量.基于必要测量不确定性的比较、评估测量步骤的准确性

이 표준은 공기 품질 측정 절차의 범위에 따라 다음과 같이 규정한다.― 고정된 조건

Air quality－Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty

VDI 3787 Blatt 2-2008 环境气象学 用于区域层面城市和区域规划的气候和空气质量人类生物气象评估方法 第一部分：气候

In this guideline, the human biometeorological factors are defined and the recommended evaluation methods for the sector "climate" are explained. The aim of this guideline is to provide evaluation methods of human biometeorology as a standard for taking into account climate and air quality (bioclimate) in relation to man in overall physical planning. Human biometeorology thus takes its place among the disciplines that provide scientific basic material for overall physical planning. Overall physical planning is greatly dependent on such support in weighing up all the in some cases conflicting viewpoints of area development, and deriving from them, in fulfillment of its assignment, a comprehensive, coordinated target system for the given planning period. Linking human biometeorology and overall physical planning requires checking, in every specific case, to ascertain which human biometeorological factors are significant in the planning process. The human biometeorological evaluation of the atmospheric environmental conditions can then also be used, for example, to clarify whether, and if so which, planning instruments are available for maintaining and improving the human biometeorological situation in the planning area.

Environmental meteorology - Methods for the human biometeorological evaluation of climate and air quality for urban and regional planning at regional level - Part I: Climate

GSO ISO 8756:2008 空气质量 处理温度、压力和湿度数据

This International Standard describes procedures for adjusting air quality measurements for changes in temperature, pressure and humidity during the sampling period. It also specifies the reference conditions of temperature, pressure and humidity to be used when reporting the results. The procedures and reference conditions are applicable to air quality measurement methods and apply to measurements made in ambient and workplace atmospheres and to the measurement of stationary source emissions.

Air quality-Handling of temperature ,pressure and humidity data

GSO ISO 9169:2008 空气质量 自动测量系统性能特征的定义和分配

This International Standard provides definitions and specifies methods to determine performance characteristics of an identified automatic air quality measuring system. Tests are carried out under stable laboratory conditions or field conditions. The automatic measuring system is considered as a black box operated according to specified procedures. This International Standard applies to measuring systems for which the following information is available: ? a description of the automatic measuring system providing the result of measurement in the physical unit of the measurand; ? operating procedures of the automatic measuring system including, where appropriate, the procedures of routine adjustment, routine verification and calibration; ? terms of reference for the test program specifying the client requirements and test conditions. This International Standard applies to measuring systems for which it is possible to apply several reference materials with accepted values with known uncertainty for the measurand, within the range of application. This International Standard does not specify the number of automatic measuring systems to be tested. NOTE 1 The number of automatic measuring systems is specified by the client in the terms of reference. NOTE 2 The list of performance characteristics in this document is limited. Additional performance characteristics can be specified by the client in the terms of reference, if appropriate.

Air quality — Definition and determination of performance characteristics of an automatic measuring system

LST EN ISO 20988:2007 空气质量 测量不确定性估算指南（ISO 20988:2007）

Air quality - Guidelines for estimating measurement uncertainty (ISO 20988:2007)

DS/EN ISO 20988:2007 空气质量 测量不确定度估算指南

This International Standard is intended to provide a common reference to uncertainty estimation in air quality measurement, including measurements of ambient air, stack emission, indoor air and workplace atmospheres. It provides comprehensive guidance and specificstatistical procedures for uncertainty estimation in air quality measurement, implementing the general recommendations of the Guide to the Expression of Uncertainty in Measurement (GUM) to boundary conditions met in air quality measurement. Conditions considered includemeasurands varying rapidly in time, hidden deviations caused by random changes of measuring conditions not corrected for, and the e

Air quality - Guidelines for estimating measurement uncertainty

DIN EN ISO 20988:2007 空气质量.评定测量不确定度指南(ISO 20988:2007)

This International Standard provides comprehensive guidance and specific statistical procedures for uncertainty estimation in air quality measurements including measurements of ambient air, stationary source emissions, indoor air, workplace atmospheres and meteorology. It applies the general recommendations of the Guide to the Expression of Uncertainty in Measurement (GUM) to boundary conditions met in air quality measurement. The boundary conditions considered include measurands varying rapidly in time, as well as the presence of bias in a series of observations obtained under conditions of intended use of methods of air quality measurement. The methods of measurement considered comprise -- methods corrected for systematic effects by repeated observation of reference materials, -- methods calibrated by paired measurement with a reference method, -- methods not corrected for systematic effects because they are unbiased by design, and -- methods not corrected for systematic effects in intended use deliberately taking into account a bias. Experimental data for uncertainty estimation can be provided either by a single experimental design in a direct approach or by a combination of different experimental designs in an indirect approach.

Air quality - Guidelines for estimating measurement uncertainty (ISO 20988:2007); English version of DIN EN ISO 20988:2007-09

JJG 680-2007 烟尘采样器检定规程

本规程适用于采样流量在 60L/min 以内，排气流速范围（5～30）m/s，用过滤称重法测定气体中烟尘浓度的烟尘采样器的首次检定、后续检定及使用中检验。

Samplers for Stack Dust

JJG 688-2007 汽车排放气体测试仪检定规程

本规程适用于汽车排放气体测试仪（以下简称测试仪）的首次检定、后续检定和使 用中的检验，型式评价试验的相关项目可参照本规程执行。

Vehicle Exhaust Emissions Measuring Instruments

BS EN ISO 20988:2007 空气质量.评定测量不确定度指南

This International Standard provides comprehensive guidance and specific statistical procedures for uncertainty estimation in air quality measurements including measurements of ambient air, stationary source emissions, indoor air, workplace atmospheres and meteorology. It applies the general recommendations of the Guide to the Expression of Uncertainty in Measurement (GUM) to boundary conditions met in air quality measurement. The boundary conditions considered include measurands varying rapidly in time, as well as the presence of bias in a series of observations obtained under conditions of intended use of methods of air quality measurement. The methods of measurement considered comprise - methods corrected for systematic effects by repeated observation of reference materials, - methods calibrated by paired measurement with a reference method, - methods not corrected for systematic effects because they are unbiased by design, and - methods not corrected for systematic effects in intended use deliberately taking into account a bias. Experimental data for uncertainty estimation can be provided either by a single experimental design in a direct approach or by a combination of different experimental designs in an indirect approach.

Air quality - Guidelines for estimating measurement uncertainty

KS I ISO 7168-2:2007 空气质量.数据交换.第2部分:压缩数据格式

이 규격은 공기의 질 데이터의 표현을 위한 요약된 데이터 형식에 대해 자세히 기술하였다.

Air quality－Exchange of data－Part 2：Condensed data format