13.040.35 清洁室（无菌室）及相关受控环境 标准查询与下载

KS I ISO 14644-1:2007 洁净室和相关控制环境.第1部分:空气洁净度分级

이 규격은 클린룸 및 관련된 제어환경에서의 공기 청정도 등급 분류를 다룬다. 이 규격에 따

Cleanrooms and associated controlled environments－Part 1：Classification of air cleanliness

KS I ISO 14644-4-2007(2017) 洁净室和相关受控环境4 部分:设计 建设和启动

Cleanrooms and associated controlled environments－Part 4：Design, construction and start-up

DIN EN ISO 14644-6:2007 无菌室和相关控制环境.第6部分:词汇

This part of ISO 14644 establishes a vocabulary of terms and definitions related to cleanrooms and associated controlled environments. This part of ISO 14644 is a compendium of the terms and definitions given in the other parts of ISO 14644. It also includes the terms and definitions given in ISO 14698-1 and ISO 14698-2.

Cleanrooms and associated controlled environments - Part 6: Vocabulary (ISO 14644-6:2007); Trilingual version EN ISO 14644-6:2007

NF X44-106:2007 无菌室和相关控制环境.第6部分:词汇

Cleanrooms and associated controlled environments - Part 6 : vocabulary.

VDI 2083 Blatt 5.1-2007 洁净室技术 洁净室操作

Die Richtlinie beschreibt Erfordernisse an den Betrieb reinraumtechnischer Systeme, die im Rahmen der Qualit?tssicherung spezifiziert werden, um die jeweiligen Reinheitsanforderungen an die Prozessumgebung sicherzustellen. Der Anwendungsbereich umfasst alle planbaren und vorhersehbaren Betriebszust?nde. Er umfasst neben dem Reinraumprozess und dem Produktionsprozess den Normalbetrieb, den Ruhebetrieb, St?rungen sowie die St?rungsbeseitigung und die Ma?nahmen der Wartung und Instandhaltung. Die Reinheitsanforderungen sollten alle für den jeweiligen Anwendungsfall wesentlichen Kontaminationskategorien erfassen: physikalische (Partikel), chemische (molekulare) und biologische. Ausnahmezust?nde, wie z. B. Katastrophen und Br?nde geh?ren nicht zum Anwendungsbereich.*www.vdi.de/2083

Cleanroom technology - Cleanroom operation

BS EN ISO 14644-6:2007 无菌室和相关控制环境.词汇表

ISO 14644-6:2007 establishes a vocabulary of terms and definitions related to cleanrooms and associated controlled environments.

Cleanrooms and associated controlled environments. Vocabulary

EN ISO 14644-6:2007 洁净室和相关控制环境.第6部分:词汇

Cleanrooms and associated controlled environments - Part 6: Vocabulary

ISO 14644-6:2007 无菌室和相关控制环境.第6部分:词汇

This part of ISO 14644 establishes a vocabulary of terms and definitions related to cleanrooms and associated controlled environments.This part of ISO 14644 is a compendium of the terms and definitions given in the other parts of ISO 14644.It also includes the terms and definitions given in ISO 14698-1 and ISO 14698-2.

Cleanrooms and associated controlled environments - Part 6: Vocabulary

DIN EN ISO 14644-8:2007 洁净室及其控制环境.第8部分:空气分子污染物的分类

This part of ISO 14644 covers the classification of airborne molecular contamination (AMC) in cleanrooms and associated controlled environments, in terms of airborne concentrations of specific chemical substances (individual, group or category) and provides a protocol to include test methods, analysis and time weighted factors within the specification for classification. This part of ISO 14644 currently considers only concentrations of AMC between 10 and lOg/m under cleanroom operational conditions. This part of ISO 14644 is not relevant for application in those industries, processes or production, where the presence of airborne molecular substances is not considered a risk to the product or process. It is not the intention of this part of ISO 14644 to describe the nature of airborne molecular contaminants. This part of ISO 14644 does not give a classification of surface molecular contamination.

Cleanrooms and associated controlled environments - Part 8: Classification of airborne molecular contamination (ISO 14644-8:2006); English version of DIN EN ISO 14644-8:2007-04

VDI 2083 Blatt 15-2007 洁净室技术 洁净工作场所的人员

Part 15 of guideline VDI 2083 covers the requirements for personnel and their clothing in relation to the cleanroom. Furthermore, indications on training for behaviour in the cleanroom as well as means of verification are given. Particle contamination caused by personnel can be effectively reduced by cleanroom garments, training and work place organisation. The purpose of this guideline is to discuss such measures for keeping possible interference caused by the "human contamination factor" within prescribed limits. Annex A applies to cleanroom trainings in accordance with the requirements of VDI 2083 Part 15. It specifies minimum requirements regarding the contents of training courses and the qualification of the trainers. Further learning contents not covered by this guideline may be added to the training programme so as to suit the needs of special areas of technology. Examples of such additions, specific to certain branches or subjects, can be found in Annex C through Annex F. The outline conditions are specified for performing the training and for the final examination.

Cleanroom technology - Personnel at the clean work place

GOST R ISO 14644-7-2007 无尘室及相关受控环境.第7部分:分离装置(清洁空气罩,手套箱,隔离器和微环境)

Cleanrooms and associated controlled environments. Part 7. Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)

GOST R ISO 14644-3-2007 洁净室和相伴控制环境.第3部分:测试方法

Cleanrooms and associated controlled environments. Part 3. Test methods

LST EN ISO 14644-8:2006 洁净室和相关受控环境 第8部分：空气分子污染的分类（ISO 14644-8:2006）

Cleanrooms and associated controlled environments - Part 8: Classification of airborne molecular contamination (ISO 14644-8:2006)

VDI 2083 Blatt 9.1-2006 洁净室技术 与要求的清洁度和表面清洁度的兼容性

This VDI guideline essentially deals with particulate contamination. Chemical (molecular), biological and radiological surface contamination is not a specific issue in this guideline; the same holds true for process media. This guideline provides definitions of the terms compatibility with the required cleanliness and cleanroom compatibility and, based on these definitions, the lassification and procedures serving to establish the suitability of equipment and air-handling components for use in environments whose air cleanliness and other parameters are assessed in accordance with technical rules (see Figure 3). Furthermore, it describes the outgassing and electrostatic characteristics of equipment and air-handling components associated with controlled environments. Surface cleanliness and its classification are also within the scope of this guideline. The compatibility of a piece of equipment with the required cleanliness includes all contaminations relevant to the process. The measuring techniques described in this guideline, serving to assess the compatibility of equipment with the required cleanliness comprise cleanroom compatibility, surface particulate cleanliness, outgassing behaviour.

Clean room technology - Compatibility with required cleanliness and surface cleanliness

KS I ISO 14644-3-2006(2016) 洁净室及相关受控环境第3部分:试验方法

Cleanrooms and associated controlled environments－Part 3：Test methods

KS I ISO 14644-3:2006 洁净室和相关控制环境.第3部分:试验方法

이 규격은 클린룸과 청정 구역의 지정된 공기 청정도 등급과 성능을 판별하는 시험 방법을 규

Cleanrooms and associated controlled environments-Part 3:Test methods

ANSI/IEST/ISO 14644-8:2006 洁净室及其相关控制环境.第8部分:空气传播分子污染物分类

This part of ISO 14644 covers the classification of airborne molecular contamination (AMC)in cleanrooms and associated controlled environments, in terms of airborne concentrations of specific chemical substances (individual, group or category) and provides a protocol to include test methods, analysis and time weighted factors within the specification for classification. (Full scope as presented in Standard includes additional limitations).

Cleanrooms and associated controlled environments - Part 8: Classification of airborne molecular contamination

ASTM E2090-06 使用光学和扫描电子显微镜从洁净室刮水器释放的颗粒和纤维的尺寸分化计数的标准测试方法

This test method provides for accurate and reproducible enumeration of particles and fibers released from a wiper immersed in a cleaning solution with moderate mechanical stress applied. When performed correctly, this counting test method is sensitive enough to quantify very low levels of total particle and fiber burden. The results are accurate and not influenced by artifact or particle size limitations. A further advantage to this technique is that it allows for morphological as well as X-ray analysis of individual particles.1.1 This test method covers testing all wipers used in cleanrooms and other controlled environments for characteristics related to particulate cleanliness.1.2 This test method includes the use of computer-based image analysis and counting hardware and software for the counting of densely particle-laden filters (see ). While the use of this equipment is not absolutely necessary, it is strongly recommended to enhance the accuracy, speed, and consistency of counting.1.3 The values stated in SI units are to be regarded as the standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy

VDI 2083 Blatt 7-2006 洁净室技术 工艺介质的清洁度

The cleaning of process media is an element of clean processing. The level of cleanliness of process media depends on a multitude of potential contamination sources. This part of the guideline VDI 2083 primarily assesses the influence of particulate contamination. Particulate contamination of products manufactured in clean rooms is not subject of this guideline.

Cleanroom technology - Cleanliness of process media

VDI 2083 Blatt 4.1-2006 洁净室技术 洁净室的规划、建造和启动

This guideline describes the systematic approach for large-scale new construction projects as well as for extension, remodelling and renovation projects and for the installation of new equipment. The scope of services presented here serves as guidance in processing cleanroom projects of varying scope, complexity and degree of maturity. The specifications give particular consideration to the cleanroom-specific requirements while providing supplementary information on other aspects of the project, where necessary. The common rules of heating, ventilating and air-conditioning, as per EN 13779, shall be applied. The annexes contain checklists allowing systematic project processing.

Cleanroom technology - Planning, construction and start-up of cleanrooms