13.230 防爆 标准查询与下载

LST EN 13463-1-2009 在潜在爆炸性环境中使用的非电气设备 第1部分：基本方法和要求

Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements

BS EN 15089:2009 爆炸阻绝系统

This European Standard describes the general requirements for explosion isolation systems. An explosion isolation system is a protective system, which prevents an explosion pressure wave and a flame or only a flame from propagating via connecting pipes or ducts into other parts of apparatus or plant areas. This European Standard specifies methods for evaluating the efficacy of the various explosion isolation systems, and methods for evaluating design tools for such explosion isolation systems when applying these in practice. This European Standard also sets out the criteria for alternative test methods and interpretation means to validate the efficacy of explosion isolations. It covers e.g.: a) general requirements for the explosion isolation components; b) evaluating the effectiveness of an explosion isolation system; c) evaluating design tools for explosion isolation systems. This European Standard is applicable only to the use of explosion isolation systems that are intended for avoiding explosion propagation between interconnected enclosures, in which an explosion may result as a consequence of ignition of an explosive mixtures e.g., dust-air mixtures, gas-(vapour-)air mixtures, dust-, gas-(vapour-)air mixtures and mists. In general explosion isolation systems are not designed to prevent the transmission of fire or burning powder either of which can initiate an explosion in downstream plant items. It is necessary to take this situation into account in risk assessments. This European Standard is only applicable for gas and dust explosions of chemically stable substances and mixtures of these (flame propagating at subsonic velocity). This European Standard is not applicable for explosions of materials listed below, or for mixtures containing some of those materials: i) chemically unstable substances that are liable to decompose; ii) explosive substances; iii) pyrotechnic substances. This European Standard does not cover flame arresters. For these devices refer to EN 12874.

Explosion isolation systems

NF S66-300-1:2009 潜在爆炸环境中的非电气设备.第1部分:基本方法和要求

Non-electrical equipment for potentially explosive atmospheres - Part 1 : basic method and requirements.

DS/EN 50194-1:2009 住宅内可燃气体检测用电气设备 第1部分：试验方法和性能要求

This European Standard specifies general requirements for the construction, testing and performance of electrically operated apparatus for the detection of combustible gases, designed for continuous operation in a fixed installation in domestic premises. The apparatus may be mains or battery powered.Additional requirements for apparatus to be used in recreational vehicles and similar premises are specified in EN 50194-2.NOTE 1 For caravan holiday homes EN 50194-1 applies.This European Standard specifies two types of apparatus to operate in the event of an escape of town gas, natural gas or liquefied petroleum gas (LPG):- Type A apparatus - to provide a visu

Electrical apparatus for the detection of combustible gases in domestic premises - Part 1: Test methods and performance requirements

DS/EN 13463-1:2009 在潜在爆炸性环境中使用的非电气设备 第1部分：基本方法和要求

This European Standard specifies the basic method and requirements for design, construction, testing and marking of non-electrical equipment intended for use in potentially explosive atmospheres in air of gas, vapour, mist and dusts. Such atmospheres can also exist inside the equipment. In addition, the external atmosphere can be drawn inside the equipment by natural breathing produced as a result of fluctuations in the equipment""s internal operating pressure, and/or temperature.This European Standard is valid for atmospheres having pressures ranging from 0,8 bar to 1,1 bar and temperatures ranging from - 20 °C to + 60 °C., i.e. equipment built to this Eur

Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements

EN 15089:2009 爆炸阻绝系统

This European Standard describes the general requirements for explosion isolation systems. An explosion isolation system is a protective system, which prevents an explosion pressure wave and a flame or only a flame from propagating via connecting pipes or ducts into other parts of apparatus or plant areas.This European Standard specifies methods for evaluating the efficacy of the various explosion isolation systems, and methods for evaluating design tools for such explosion isolation systems when applying these in practice.This European Standard also sets out the criteria for alternative test methods and interpretation means to validate the efficacy of explosion isolations. It covers e. g.: a) general requirements for the explosion isolation components; b) evaluating the effectiveness of an explosion isolation system; c) evaluating design tools for explosion isolation systems.This European Standard is applicable only to the use of explosion isolation systems that are intended for avoiding explosion propagation between interconnected enclosures, in which an explosion may result as a consequence of ignition of an explosive mixtures e. g., dust-air mixtures, gas-(vapour-)air mixtures, dust-, gas-(vapour-)air mixtures and mists. In general explosion isolation systems are not designed to prevent the transmission of fire or burning powder either of which can initiate an explosion in downstream plant items. It is necessary to takeThis situation into account in risk assessments.This European Standard is only applicable for gas and dust explosions of chemically stable substances and mixtures of these (flame propagating at subsonic velocity).This European Standard is not applicable for explosions of materials listed below, or for mixtures containing some of those materials: i) chemically unstable substances that are liable to decompose; ii) explosive substances; iii) pyrotechnic substances.This European Standard does not cover flame arresters. For these devices refer to EN 12874.

Explosion isolation systems

DIN EN 14491 Berichtigung 1:2009 灰尘防爆通风保护系统.技术勘误DIN EN 14491-2007

Dust explosion venting protective systems; German version EN 14491:2006, Corrigendum to DIN EN 14491:2007-08; German version EN 14491:2006/AC:2008

BS EN 13463-1:2009 潜在爆炸性环境用非电气设备.基本方法和要求

This European Standard specifies the basic method and requirements for design, construction, testing and marking of non-electrical equipment intended for use in potentially explosive atmospheres in air of gas, vapour, mist and dusts. Such atmospheres can also exist inside the equipment. In addition, the external atmosphere can be drawn inside the equipment by natural breathing produced as a result of fluctuations in the equipment’s internal operating pressure, and/or temperature. This European Standard is valid for atmospheres having pressures ranging from 0,8 bar to 1,1 bar and temperatures ranging from - 20 °C to + 60 °C., i.e. equipment built to this European Standard will be satisfactory to any service conditions within this range unless otherwise specified.

Non-electrical equipment for use in potentially explosive atmospheres Part 1: Basic method and requirements

ASTM E2639-09a 废弃容器抗稻瘟病的标准试验方法

This test procedure is used to measure two effects of an explosive detonated in a trash receptacle as related to the type and amount of explosive charge and the location where the charge is placed in the trash receptacle. The two sources of damage are from: Primary and secondary fragments due to the detonation, and Overpressure from the detonation. This test procedure is also used to document the physical damage to the trash receptacle due to explosion. This test procedure is applicable to all trash receptacles, including lidded or non-lidded as supplied by the manufacturer. This test procedure is used to generate data for use in developing performance specifications for trash receptacles.1.1 This test method provides a procedure for characterizing the performance of a trash receptacle when an explosive is detonated within the receptacle. 1.1.1 The procedure measures the magnitude of blast waves (that is, external overpressures) developed and determines the extent and location of fragmentation produced during the explosion. 1.1.2 Effects due to a fireball resulting from the detonation of an explosive within a trash receptacle are beyond the scope of the test method. 1.2 This test method is intended to be performed in open-air test arenas. 1.3 The values stated in SI units are to be regarded as the standard. The values stated in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Blast Resistance of Trash Receptacles

ANSI/UL 60079-6(R2013)(12.00.05)-2009 爆炸性环境安全标准 第6部分：油浸设备保护 o，（提案投票日期为 08-23-13）

Standard for Safety for Explosive Atmospheres - Part 6: Equipment Protection by Oil Immersion o, (Proposal Ballot dated 08-23-13)

ASTM E2021-09 尘埃层热表面燃烧温度的标准试验方法

This test method is applicable to dusts and powders, and provides a procedure for performing laboratory tests to evaluate hot-surface ignition temperatures of dust layers. The test data can be of value in determining safe operating conditions in industrial plants, mines, manufacturing processes, and locations of material usage and storage. Due to variation of ignition temperature with layer thickness, the test data at one thickness may not be applicable to all industrial situations (see Appendix X1). Tests at various layer thicknesses may provide a means for extrapolation to thicker layers, as listed in the following for pulverized Pittsburgh bituminous coal dust (2). Mathematical modeling of layer ignition at various layer thicknesses is described in Ref. (3). Layer Thickness, mmHot-Surface Ignitionnbsp;nbsp;nbsp;Temperature, °C 6.4300 9.4260 12.7240 25.4210 This hot plate test method allows for loss of heat from the top surface of the dust layer, and therefore generally gives a higher ignition temperature for a material than Test Method E771, which is a more adiabatic system. This test method for dust layers generally will give a lower ignition temperature than Test Method E1491, which is for dust clouds. The layer ignition temperature is determined while monitoring for periods of minutes to hours, while the dust cloud is only exposed to the furnace for a period of seconds. Note 18212;Much of the literature data for layer ignition is actually from a basket in a heated furnace (4), known as the modified Godbert-Greenwald furnace test. Other data are from nonstandardized hot plates (5-9). Additional information on the significance and use of this test method may be found in Ref. (10).1.1 This test method covers a laboratory procedure to determine the hot-surface ignition temperature of dust layers, that is, measuring the minimum temperature at which a dust layer will self-heat. The test consists of a dust layer heated on a hot plate. , 1.2 Data obtained from this test method provide a relative measure of the hot-surface ignition temperature of a dust layer. 1.3 This test method should be used to measure and describe the properties of materials in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire hazard risk of materials, products, or assemblies under actual fire conditions. However, results of this test method may be used as elements of a fire risk assessment that takes into account all of the factors that are pertinent to an assessment of the fire hazard risk of a particular end use product. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior ......

Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers

ANSI/UL 60079-6-2009 爆炸性环境的安全性标准.第6部分:油浸"o"类型的设备防护

This recirculation proposal provides changes to the proposal bulletin dated 07/18/08. The comment resolution matrix contains the comments received on the 07/18/08 proposal bulletin and the responses to those comments. Revisions to proposed requirements based upon these comments are included in the recirculation draft of the standard.

Standard for Safety for Explosive Atmospheres - Part 6: Equipment Protection by Oil Immersion "o"

ANSI/UL 60079-5-2009 爆炸性环境的安全性标准.第5部分:通过粉末填充"q"设备防护

This recirculation proposal provides changes to the proposal bulletin dated 07/18/08. The comment resolution matrix contains the comments received on the 07/18/08 proposal bulletin and the responses to those comments. Revisions to proposed requirements based upon these comments are included in the recirculation draft of the standard.

Standard for Safety for Explosive Atmospheres - Part 5: Equipment Protection by Powder Filling "q"

ANSI/UL 60079-1-2009 爆炸性气体环境用电气设备的安全性标准.第1部分:防爆外壳(提案日期2007/12/28和2008/ 7/11)

The Sixth Edition of the Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 1: Flameproof Enclosures "d", UL 60079-1 which when published will adopt the Sixth Edition of IEC 60079-1. This new edition is a complete rewrite of text to coincide with the IEC text and contains US differences.

Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 1: Flameproof Enclosures (Proposals dated 12/28/07 and 7/11/08)

AQ 3015-2008 氯气捕消器技术要求

本标准规定了氯气捕消器（以下简称捕消器）的分类、型号标记、要求、检测方法、检验规则、标志、运输、存放和产品有效期。 本标准适用于捕消器的设计、制造、组装和检验。

Technical requirements of chlorine arrester

DS/EN 50402/A1:2008 检测和测量可燃气体或有毒气体或蒸汽或氧气的电气设备 固定式气体检测系统的功能安全要求

This European Standard is applicable to fixed gas detection systems for the detection and measurement of flammable or toxic1 gases or vapours or oxygen. This European Standard supplements the requirements of the European Standards for electrical apparatus for the detection and measurement of flammable gases, vapours ( e.g. EN 61779 or EN 50241), toxic gases (e.g. EN 45544) or oxygen (e.g. EN 50104). Applying the above mentioned metrological standards ensure the measuring performance in normal operation of the gas detection system. Additionally the requirements of this European Standard address the functional safety of gas detection systems and encompasses c

Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems

VDI 2263 Blatt 9-2008 粉尘火灾和粉尘爆炸危险性评估防护措施散装物料粉尘度的测定

The guideline VDI 2263 Part 9 describes a procedure for the determination of the dustiness of combustible dusts by practical simulation of dust formation processes (conveying, discharging, filling, loading/unloading, etc.). The procedure described yields a characteristic for the dustiness of dusts, which can be used in particular for the assessment of dust explosion hazards. This guideline neither describes a reference test procedure in accordance with DIN EN 15051 nor a routine procedure in accordance with DIN 33897-1 for the characterization of the dustiness and the ensuing health hazards at the workplace.

Dust fires and dust explosions - Hazards - assessment - protective measures - Determination of dustiness of bulk materials

DS/EN 60079-29-2/Corr. 1:2008 爆炸性环境 第 29-2 部分：气体探测器 可燃气体和氧气探测器的选择、安装、使用和维护

This part of IEC 60079-29 gives guidance on, and recommended practice for, the selection, installation, safe use and maintenance of electrically operated group II apparatus intended for use in industrial and commercial safety applications for the detection and measurement of flammable gases complying with the requirements of IEC 60079-29-1.This Guide is a compilation of practical knowledge to assist the user, and applies to apparatus, instruments and systems that indicate the presence of a flammable or potentially explosive mixture of gas or vapour with air by using an electrical signal from a gas sensor to produce a meter reading, to activate a visual or a

Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen

DS/EN 60079-29-1:2008 爆炸性环境 第 29-1 部分：气体探测器 可燃气体探测器的性能要求

This part of IEC 60079-29 specifies general requirements for construction, testing and performance, and describes the test methods that apply to portable, transportable and fixed apparatus for the detection and measurement of flammable gas or vapour concentrations with air. The apparatus, or parts thereof, are intended for use in potentially explosive atmospheres (see 3.1.8) and in mines susceptible to firedamp.This part is also applicable when an apparatus manufacturer makes any claims regarding any special features of construction or superior performance that exceed these minimum requirements. In these cases, all such claims shall be verified and the test

Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

DS/EN 60079-29-2:2008 爆炸性环境 第 29-2 部分：气体探测器 可燃气体和氧气探测器的选择、安装、使用和维护

This part of IEC 60079-29 gives guidance on, and recommended practice for, the selection, installation, safe use and maintenance of electrically operated group II apparatus intended for use in industrial and commercial safety applications for the detection and measurement of flammable gases complying with the requirements of IEC 60079-29-1.This Guide is a compilation of practical knowledge to assist the user, and applies to apparatus, instruments and systems that indicate the presence of a flammable or potentially explosive mixture of gas or vapour with air by using an electrical signal from a gas sensor to produce a meter reading, to activate a visual or a

Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen