13.320 报警和警告系统 标准查询与下载

LST EN 50291-1/AC-2021 气体检测器 用于检测住宅中一氧化碳的电气设备 第1部分：测试方法和性能要求

Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements

21/30401761 DC BS EN 62676-2-33 用于安全应用的视频监控系统 第 2-33 部分 云端上行及远程管理系统接入

BS EN 62676-2-33. Video surveillance systems for use in security applications - Part 2-33. Cloud uplink and remote management system access

PN-EN 50291-1-2018-06/AC-2021-03 E 气体检测器 住宅一氧化碳检测用电气设备 第1部分：试验方法和性能要求

Gas detectors -- Electrical apparatus for the detection of carbon monoxide in domestic premises -- Part 1: Test methods and performance requirements

OENORM F 3076-2021 报警传输系统维护

Maintenance of alarm transmission systems

ASTM D4599-21 使用长度的污染剂量计测量有毒气体或蒸气的浓度的标准实践

1.1?This practice describes the detection and measurement of time weighted average (TWA) concentrations of toxic gases or vapors using length-of-stain colorimetric dosimeter tubes. A list of some of the gases and vapors that can be detected by this practice is provided in Append

Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters

DB43/T 2000-2021 城市轨道交通治安反恐防范要求

Anti-terrorism prevention requirements for public security in urban rail transit

DS/EN 50291-1:2021 气体检测仪《住宅一氧化碳检测用电气装置》第1部分：试验方法和性能要求

Gas detectors – Electrical apparatus for the detection of carbon monoxide in domestic premises – Part 1: Test methods and performance requirements

DB31/T 329.13-2021 重点单位重要部位安全技术防范系统要求 第13部分：枪支弹药生产、经销、存放、射击场所

Safety technical protection system requirements for important parts of key units Part 13: Production, distribution, storage and shooting locations of guns and ammunition

OVE EN 50676-2021 制冷剂气体检测和浓度测量用电气设备性能要求和试验方法（德文版）

Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods (german version)

SN EN 17355-2021 铁路应用 城轨通信设备 系统要求

Railway applications - Communication device for urban rail - System requirements

PN-EN 50131-13-2020-12 E 报警系统 入侵和劫持系统 第13部分：烟火式遮挡安全装置

Alarm systems -- Intrusion and hold-up systems -- Part 13: Pyrotechnic Obscuration Security Devices

T/CHES 43-2020 水利水电工程白蚁实时自动化监测预警系统技术规范

前言..............................................................................................................................................................................II 1 范围.......................................................................................................................................................................... 1 2 规范性引用文件...................................................................................................................................................... 1 3 术语和定义.............................................................................................................................................................. 1 4 监测预警系统........................................................................................................................................................ 2 5 信息管理................................................................................................................................................................ 4 6 试验方法................................................................................................................................................................ 5 7 检验规则................................................................................................................................................................ 6 8 标志、包装、运输和储存.................................................................................................................................... 7 附录 A （资料性附录） 水利工程白蚁监测点的布置.........................................................................................9 附录 B （规范性附录） 白蚁监测装置检验抽样方法..................................................................................... 11

Technical specifications for real-time automatic monitoring and early warning system of termites in water conservancy and hydropower projects

KS C IEC 62851-2:2020 报警和电子安全系统 - 社会报警系统 - 第2部分:触发设备

Alarm and electronic security systems — Social alarm systems Part 2: Trigger devices

KS C IEC 62851-2-2020 报警和电子安全系统 - 社会报警系统 - 第2部分:触发设备

Alarm and electronic security systems — Social alarm systems Part 2: Trigger devices

ASTM F3020-20 安全和安保用手动金属探测器的标准性能规范和试验方法

1.1 This standard applies to all hand-worn or glove-type metal detectors used to find metal contraband concealed or hidden on people or other objects with hand-accessible surfaces. Hand-worn metal detectors (HWMDs) are significantly different in design compared to the more common hand-held metal detector (HHMD). For example, the HWMD generates a much more localized magnetic field than does the HHMD and the useful field of the HWMD is normal to the plane of the hand whereas the useful field of the HHMD is multidirectional. 1.2 This standard describes baseline-performance requirements, which includes metal object detection performance, safety (electrical, mechanical, fire), electromagnetic compatibility, environmental conditions and ranges, and mechanical durability. The requirements for metal detection performance are unique and, therefore, test methods for these parameters are provided, including the design of test objects. An agency or organization using this standard is encouraged to add their unique operationally-based requirements to those requirements listed in this baseline-performance standard. 1.3 This documentary standard describes the use of spherical test objects, instead of actual threat objects or exemplars of threat objects, to test the detection performance of hand-worn metal detectors. Spherical test objects are used because the detectability of spherical test objects is not orientation dependent, whereas this is not true for non-spherical test objects. This orientation-dependent detectability of nonspherical test objects may allow a HWMD to be incorrectly attributed a higher performance capability than that HWMD is capable of providing. To aid agencies wishing to add specific threat objects to their detection performance requirements, included in Appendix X1 is the analysis of the probability of detection for different orientations of agency-specific nonspherical threat objects. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Performance Specifications and Test Methods for Hand-Worn Metal Detectors Used in Safety and Security

ASTM F3278-20 安全和安保用手持金属探测器的标准性能规范和试验方法

1.1 This standard applies to all hand-held metal detectors (HHMDs) used to find metal contraband concealed or hidden on people or other objects with accessible surfaces. This standard describes baseline performance requirements, which includes metal object detection performance, safety (electrical, mechanical, fire), electromagnetic compatibility, environmental conditions and ranges, and mechanical durability. The requirements for metal detection performance are unique and, therefore, test methods for these parameters are provided, including the design of test objects. An agency or organization using this standard is encouraged to add their unique operationally-based requirements to those requirements listed in this baseline performance specification. 1.2 This standard describes the use of spherical test objects, instead of actual threat objects or exemplars of threat objects, to test the detection performance of hand-held metal detectors. Spherical test objects are used because the detectability of spherical test objects is not orientation dependent, whereas this is not true for non-spherical test objects. This orientationdependent detectability of non-spherical test objects may allow a HHMD to be incorrectly attributed a higher performance capability than that HHMD is capable of providing. To aid agencies wishing to add specific threat objects to their detection performance requirements, included in Appendix X1 is the analysis of the probability of detection for different orientations of agency-specific threat objects. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Performance Specifications and Test Methods for Hand-Held Metal Detectors Used in Safety and Security

LST EN IEC 60839-11-5:2020 警报和电子安全系统 第 11-5 部分：电子访问控制系统 开放式监督设备协议（OSDP）（IEC 60839-11-5:2020）

Alarm and electronic security systems - Part 11-5: Electronic access control systems - Open Supervised Device Protocol (OSDP) (IEC 60839-11-5:2020)

GA/T 1757-2020 入侵和紧急报警系统　紧急报警装置

Intrusion and hold-up systems—Hold-up device

DB34/T 3699-2020 智慧社区 公共安全 安全技术防范建设规范

Smart community public safety and security technology prevention and construction specifications

T/ZZB 1859-2020 民用无线烟雾报警器

本文件规定了民用无线烟雾报警器（以下称报警器）的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本文件适用于民用建筑中安装的光电式感烟工作的报警器，其他环境中安装类似相同原理工作的报警器，除特殊技术和环境要求有关标准另行规定外，可参考执行本文件。

Civilian wireless smoke alarm device