13.340 防护设备 标准查询与下载

GSO ISO 11613:2006 消防员防护服：测试方法和性能要求

This International Standard specifies test methods and minimum requirements for protective clothing to be worn during firefighting and associated activities where there is a risk of heat and/or flame. This International Standard covers the general clothing design, the minimum performance levels of the materials used, and the methods of test for determining these performance levels. Clauses 4 and 5 define two separate sets of design and performance requirements. This International Standard does not cover special clothing for use in other high risk situations such as specialized firefighting, or clothing for use in long term firefighting operations in high ambient temperature, for example brush, wildland, or forest firefighting. It does not cover protection for the head, hands and feet or protection against other hazards, for example chemical, biological, radiation and electrical hazards. These aspects may be dealt with in other standards. Selection of the appropriate system of clothing is dependent on carrying out an effective risk assessment which identifies the hazards to be faced, evaluates the likelihood of those hazards, and provides the means to reduce or eliminate these hazards. Details on one example at a recommended risk assessment approach and some factors for consideration are included in annex F. NOTE Additional personal protective equipment to protect the head, hands, and feet should be worn with clothing specified in this International Standard and in majority of situations breathing apparatus is also required to be worn. Firefighters should be trained in the use and care of protective clothing covered by this International Standard including an understanding of its limitations and of the other items of personal protective equipment that may be required depending on the risks encountered.

PROTECTIVE CLOTHING FOR FIREFIGHTERS – LABORATORY TEST METHODS AND PERFORMANCE REQUIREMENTS

CAN/CSA-Z617-2006(R2011) 钝性创伤的个人防护装备 (PPE)

1 Scope 1.1 This Standard applies to personal protective apparel intended to provide protection to the torso, arms, and legs, including joints, of correctional officers and law enforcement personnel from blows with blunt objects (e.g., rocks, stones, glass bottles, pipes, baseball bats, wooden planks, etc.)* during riots, inmate control situations, and in any other situation in which there is a threat of violent attack to the torso, arms, and legs. *See Annex B for typical energies involved with these objects. 1.2 The scope of this Standard is limited to protection of the torso, arms, and legs. It does not cover the head, neck, wrists, hands, ankles, and feet. It should be noted that protective apparel covered by this Standard is not designed to offer protection against ballistic projectiles. 1.3 Protective apparel covered by this Standard consists of components or systems of components designed to protect the torso, arms, and legs (see Annex A for advice on selection and use and Annex E for advice on care and maintenance of this equipment). 1.4 This Standard does not include performance criteria for protection against other threats (e.g., stabbing, slashing, penetration, fire, electrical, chemical, biological, and radionuclide threats). However, reference to other Standards addressing these types of protection is made. For riot helmets and faceshields, refer to CAN/CSA-Z611. For protective footwear, refer to CAN/CSA-Z195. For stab-resistant body armour, refer to NIJ 0115.00. For other types of protective clothing, refer to BS 7971-1 and BS 7971-2. For protective gloves, refer to NIJ Test Protocol 99-114. 1.5 In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Personal Protective Equipment (PPE) for Blunt Trauma

WJ 2665-2005 车载三防方舱滤毒通风装置通用规范

General specifications for vehicle shelter NBC filtration and ventilation units

EJ/T 1108-2001 密封箱室设计原则

Design principles for containment enclosures

PLUS 1156:2001 滑道保护系统：实用基本概念

Préface Ce document constitue la première édition de la publication spéciale de la CSA PLUS 1156, Systèmes de protection contre les chutes : notions pratiques essentielles. Malgré un intérêt considérable pour cette question, il n'existe que très peu d'ouvrages sur la protection contre les chutes. On a rédigé le manuel PLUS 1156 en réponse à cet intérêt et pour aider les utilisateurs de systèmes d'arrêt de chutes (SAG) à faire le meilleur usage possible de l'équipement fourni par leurs employeurs pour la sécurité des travailleurs. Au cours de la rédaction de ce manuel, notre principal souci était la sécurité des utilisateurs. Les employeurs qui encouragent leurs employés à étudier cet ouvrage devraient donc profiter d'une meilleure sécurité des travailleurs se traduisant par une réduction des blessures et des accidents mortels, ainsi que des responsabilités légales connexes. Le manuel PLUS 1156 est destiné à aider les travailleurs qui ont reçu une formation en protection contre les chutes et qui appliquent leurs nouvelles connaissances au travail. Il n'est pas destiné à remplacer une formation adéquate en protection contre les chutes donnée par une personne compétente. Un SAC typique est constitué de divers dispositifs faits de matériaux différents. Une formation en protection contre les chutes adéquate, portant sur un grand nombre d'aspects de la manipulation des cordes et des matériaux, est essentielle pour une protection adéquate contre les chutes. Les personnes qui ont déjà une connaissance approfondie de ces questions peuvent utiliser le manuel PLUS 1156 pour actualiser leurs connaissances et comme manuel de référence. Ce manuel présente des informations pratiques et théoriques sur les systèmes d'arrêt de chutes. Le chapitre 1 décrit brièvement les dix principes essentiels et leur application, et le chapitre 2, dont la numérotation est parallèle à celle du chapitre 1, examine ces principes de façon plus détaillée et présente des informations documentaires et des exemples.

Systèmes de protection contre les chutes: Notions pratiques essentielles

EN ISO 13997:1999/AC:2000 防护服.机械特性.抗尖锐物体切割性的测定 包含修改件AC,2000

Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:1999)

NAVY MIL-H-81843 C NOTICE 1-1997 HGU-32/P可充气的反曝光传单的罩

MIL-H-8 1843C is inactive for new design and is no longer used, except for replacement purposes.

HOOD, FLYER'S, ANTI-EXPOSURE, INFLATABLE, HGU-32/P

GSO 519:1994 防护安全鞋的测试方法

This standard specifies methods of test for the impact resistance of safety and protective toe-caps, the toes of footwear incorporating such toe-caps, resistance to nail penetration, corrosion and flexing of protective midsoles, and abrasion resistance of laces applicable to safety and protective footwear.

Methods of test for safety foot wear.

SNI 19-1721-1989 工作区域噪音评估与控制

Noise in working area, Evaluation and control

NAVY MIL-H-81843 C-1986 HGU-32/P可充气的反曝光传单的罩

T a s specification covers the requirements for one type and size of an inflatable, anti-exposure, flyer's hood designated as HGU-32/P.

HOOD, FLYER'S, ANTI-EXPOSURE, INFLATABLE, HGU-32/P